Clocking Off a Serial Number

About Clocking Off a Serial Number

If you want to stop working on a serial number for some time, you can clock off the serial number, and then clock on again when you resume working on it. It provides visibility to the supervisor on the progress of work for an operation.

The following conditions apply when you clock off a serial number:
  • You can clock off only the serial numbers that you have clocked on.
  • You can clock off multiple serial numbers in an operation at the same time.

Clock Off a Serial Number

Procedure

  1. In the Work Queue page, in the row containing the operation on which you want to stop working, select the OFF button.
    Note: The OFF button is enabled only if you have clocked on at least one serial number in the operation.
    The Select Serial number(s) to clock off window appears, displaying a list of serial numbers in the operation that you have clocked on.
  2. If you want to clock off all the available serial numbers, select the check box in the heading column of the table.
  3. If you want to clock off selected serial numbers, perform one of the following steps:
    • Select the check box for each serial number that you want to clock off.
    • Search for a serial number by entering the value in the Search in available serial numbers box, and then select the check boxes from the filtered list that appears.
    • Scan the bar code of the serial number by selecting .
  4. Select Clock off.

Results

The selected serial numbers are clocked off. In the Work Queue page, the number of serial numbers that are clocked on is updated in the OFF/ON column.