50
entraNET
www.GEDigitalEnergy.com
entraNET
Order Code Example
· BuyentraNETthroughtheonlinestore
· Downloadguideformspecifications
· Downloaduserdocumentation
· Readapplicationnotesandwhitepapers
View Accessories catalog at www.gemds.com
Accessories for the entraNET
Visit www.GEMDS.com/entraNET to:
090115-v01
Specifications
Ordering
GENERAL
Power
6-30 VDC
Temperature
-40oC to +70oC
Humidity
95% at 60°C (104°F) non-con
densing
Housing
Die-cast Aluminum
Area Approval
Class 1, Division 2, Groups A,
B, C, D for hazardous locations
CSA
Spreading Mode
Frequency Hopping Spread
Spectrum
Access Point Size
3.15 H x 17.2 W x 11.2 D cm.
(1.25 H x 6.75 W x 4.5 D in.)
Remote Size
2.5 H x 12.7 W x 8.9 D cm.
(1 H x 5 W x 3.5 D in.)
P22 Option Size
8.9 H x 48.3 W x 35.6 D cm.
(3.5 H x 19 W x 14 D in.)
Access Point
Weight
635 g (1.4 lb.)
Remote Weight
472 g (1.04 lb.)
P22 Option Weight 7.6 kg (14.7 lbs.) with
Transceivers
Power
6-30 VDC
Ethernet Interface 10BaseT, RJ-45
Serial COM 1
RS-232/V.24, RJ-11, DCE,
1200-115,200 bps
Serial COM 2
RS-232/V.24, RJ-45, DCE,
1200- 115,200 bps
Antenna
TNC connector (female)
Mounting
Flat surface mount brackets
DIN Rail
LED Indications
ETH, COM1, COM2, Power, Link
900 MHz MODELS
Data Rate
106 kbps
Frequency
902-928 MHz ISM band
Range (Fixed)
Up to 30 miles
Range (Mobile)
Up to 10 miles
Gain
136 dB
Carrier Power
0.1 To 1.0 watts (20 to 30 dBm)
Receiver Sensitivity -106 dBm (1 x 10-6 BER)
typical
Output Impedance 50 Ohms
Occupied
Bandwidth
200 kHz
Modulation
CPFSK (Continuous Phase FSK)
2.4 GHz MODELS
Data Rate
106 kbps
Frequency
2.4016-2.4778 GHz ISM band
Range
Up to 15 miles
Range ETSI
Up to 1 mile
Mobile Range
Up to 2.5 miles
Gain
131 dB
Carrier Power
0.05 To 0.5 watts (17 to 27
dBm)
Carrier Power-ETSI 0.01 to 0.1 watts (10 to 20
dBm)
Receiver Sensitivity -104 dBm (1 x 10-6 BER)
typical
Output Impedance 50 Ohms
Occupied
Bandwidth
200 kHz
Modulation
CPFSK (Continuous Phase FSK)
PROTOCOLS
Wireless
CSMA/CA (Collision Avoidance)
Ethernet
IEEE 802.3, Ethernet IITCP/IP
(DHCP, ICMP, UDP, TCP, ARP)
Serial
Encapsulation over IP
(tunneling) for serial async
multidrop protocols
Management
HTTP (embedded web server),
TELNET, Local Console,
SNMPv1/2/3, MIB II, Enterprise
MIB, SYSLOG, MDS NETview
MS®
APPROVALS
FCC
Part 15.247
IC Industry
Canada
RSS210
EU
ETSI Approved, CE Mark
POWER CONSuMPTION
eNETN-MD
*
*
11
*
S
*
9
900 MHz Band
2
2.4 GHz
A
Access Point
R
Remote IP/Ethernet and Serial Connections
F
FCC/Industry Canada Certification
E
EU/ETSI Certification Limit 0.1 Watt Transmit Power
Only available for 2.4 GHz models
1 Enable Network Management Diagnostics
0 Disable Network Management - Diagnostics
900 MHz
2.4 MHz
Fixed Remote Kit with yagi
KRF-N09-D1
KFR-N24-E1
Power Supply (AC Input)
01-3682A02
01-3682A02
eNETN-MD9A11FS1
·Accesspoint
·900MHz
·FCC/ICcertification
·Networkmanagementenabled
Mode
30 Vdc
13.8 Vdc
6 Vdc
Transmit
270 mA
525 mA
1175 mA
Receive
115 mA
220 mA
510 mA
Mode
30 Vdc
13.8 Vdc
6 Vdc
Transmit
240 mA
470 mA
1025 mA
Receive
65 mA
120 mA
260 mA
Sleep
8 mA
15 mA*
130 mA
Shutdown
0.78 mA 0.55 mA*
0.37 mA
Mode
30 Vdc
13.8 Vdc
6 Vdc
Transmit
253.3 mA 488.5 mA 1091.7 mA
Receive
119.7 mA 230.1 mA 533.3 mA
Mode
30 Vdc
13.8 Vdc
6 Vdc
Transmit
223.3 mA 433.8 mA 941.7 mA
Receive
69.7 mA 130.1 mA 283.3 mA
Sleep
8 mA
15 mA*
130 mA
Shutdown
0.78 mA
0.55 mA*
0.37 mA
* Sleep/shutdown measurements @ 12 Vdc
2.4 GHz ACCESS POINT
900 MHz ACCESS POINT
2.4 GHz REMOTE
900 MHz REMOTE
CommunicationsRG.indb 50
5/1/2009 12:33:49 PM