48
iNET-II
www.GEDigitalEnergy.com
iNET-II Remote and Access Point
Order Code Example
Order Code Example
P21 Protected Station
· BuyiNET-IIthroughtheonlinestore
· Downloadguideformspecifications
· Downloaduserdocumentation
· Readapplicationnotesandwhitepapers
View Accessories catalog at www.gemds.com
Accessories for the iNET-II
Visit www.GEMDS.com/iNET-II to:
090202-v07
Specifications
Ordering
GENERAL
Data Rate
1 Mbps/512 Kbps user
configured air link
Frequency band
902-928 MHz ISM band
Spreading mode
DTS/FHSS
Range (512 Kbps)
Up to 20 miles (fixed)
Up to 3 miles (mobile)
Range (1 Mbps)
Up to 15 miles
AVAILABLE CONFIGuRATIONS
Remote Serial Gateway
Remote Ethernet Bridge
Access Point/Remote Dual Gateway (Both Serial
and Ethernet)
RADIO
System gain
139 dB @ 512 Kbps;
134 dB @ 1 Mbps
Carrier power
100mW to 1W (20 to 30 dBm)
Output impedance 50 Ohms
Occupied
bandwidth
600 kHz
Modulation
CPFSK (continuous phase FSK)
RECEIVER SENSITIVITy (WITH 10-6 BER):
512 Kbps
-97 dBm
1 Mbps
-92 dBm
PHySICAL INTERFACE
Ethernet
10baseT, RJ-45
Serial
COM1
RS-232/V.24, DB-9F, DCE
COM2
RS-232/V.24, DB-9M, DTE,
1,200-115,200 bps serial ports
Antenna
TNC connector (female)
LEDs
Lan, Com1, Com2, Power, Link
PROTOCOLS
Wireless
CSMA/CA (collision avoidance)
Ethernet
IEEE 802.3, ethernet II, IEEE
802.1Q (trunk, access, and
native), STP, IGMP
TCP/IP
DHCP, ICMP, UDP, TCP, ARP,
Multicast, SNTP, TFTP
Serial
PPP, encapsulation over IP
(tunneling) for serial async
multidrop protocols including
Modbus, DNP.3, DF1, BSAP
Optional
Modbus TCP
MDS CyBER SECuRITy SuITE, LEVEL 4
Encryption
AES-128 with automatic key
rotation. (optional)
Authentication
802.1x, RADIUS, EAP/TLS, PKI,
PAP, CHAP
Traffic segregation 802.1Q VLAN
Management
SSL, SSH, HTTPS
MANAGEMENT
HTTP, HTTPS, SSH, TELNET, local console
SNMPv1/v2/v3, MIB II, enterprise MIB
SYSLOG
MDS NETview MSTM
ENVIRONMENTAL
Temperature
-30°C to +60°C (-22°F to
+140°F)
Humidity
95% at 40°C (104°F) non-
condensing
ELECTRICAL
Input power
10.5-30 Vdc
Current consumption (nominal)
MECHANICAL
Case
die cast aluminum
Dimensions
3.15 H x 17.2 W x 11.2 D cm.
(1.25 H x 6.75 W x 4.5 D in.)
Weight
908 g (2 lb.)
Mounting options flat surface mount brackets,
DIN rail, 19" rack tray
P21 OPTION:
Case
steel (rack mountable 2U)
Dimensions
8.9 H x 48.3 W x 35.6 D cm.
(3.5 H x 19 W x 14 D in.)
Weight
7.6 kg, (14.7 lbs) with
transceivers
AGENCy APPROVALS
FCC part 15.247 (DTS)
UL/CSA class 1 Div. 21
IC
iNETII-
**
*
*
Features
AP
Access Point
DG
Dual Gateway. Ethernet and Serial remote
EB
Ethernet Bridge. Ethernet only remote
SG
Serial Gateway. Serial only remote.
Mounting
S
Standard brackets for mounting on flat surfaces
N
No brackets
D
Din-rail brackets
Special Assembly
N
None
A
Mounted in a P21 Protected Station
P21-
*
*
Input Power
1
12 VDC
2
24 VDC
3
48 VDC
A
115/220 VAC with battery backup
B
115/220 VAC without battery backup
Antenna Ports
1
One port
2
Two ports
Fixed Remote Kit with yagi
KFR-N09-D1
Power Supply (AC Input)
01-3682A02
iNETII-APNN
P21-21
·Accesspoint
·EthernetandSerial
·Nomountingbrackets
·Nospecialassembly
·ProtectedstationforiNET-II
·Radiosorderedseparately
·24VDCpowerinput
·Singleantennaport(switched)
Mode
Power 13.8 Vdc
24 Vdc
Transmit 7 W
510 mA
290 mA
Receive
2.8 W
200 mA
120 mA
CommunicationsRG.indb 48
5/1/2009 12:33:39 PM