Provide Readings for a Measurement Location

This topic describes how to provide readings for a Measurement Location on a Route.

Note: Depending on your device and system settings, a message may appear, asking if you want to allow the device to use geolocation data.

Steps

Access the Route for which you want to provide readings.
In the Route Map pane, select a Measurement Location.

The workspace for the Measurement Location appears.

Tip: You can use the arrows at the top of the workspace for the selected checkpoint to navigate between checkpoints.
In the Reading box, select or enter the reading for the checkpoint.
As necessary, select or enter values in the Action Taken and Comments boxes.

Results

A Reading record is created.
Readings are saved automatically.

Note: The icon indicates that a reading is successfully saved to the device.
The progress bar that appears in the Route Map pane and in the Rounds Data Collection Overview page in the Overdue Items and Due Items sections is updated to reflect the number of checkpoints for which you have provided readings as well as the percentage of the Route that is complete.

If the value that you entered in the Reading box is normal, then the Measurement Location is marked with a icon on the Route Map pane.
If the value that you entered in the Reading box is a level 1 alert, a message appears below the Reading field, specifying the action that you should take. The Measurement Location is marked with a icon in the Route Map pane.
If the value that you entered in the Reading box is in alert, then a message appears below the Reading field, specifying the action that you should take. The Measurement Location is marked with a icon in the Route Map pane.