V5.2.1.0.0
360 View
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, the tab content in 360 view was reloaded on every tab selection. This issue has been resolved. Now, the tab content will load only once without any reload until the page refresh. | 697925 |
APM Connect
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when loading ASI Master data from multiple EAM Systems using the ASI EAM Data Loader, data from the first EAM System was deleted after data from the second one was loaded. This issue has been resolved. | 725884 |
Asset Criticality Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, the option in the Assets section was disabled even if the Asset did not belong to an existing ACA Analysis. This issue has been resolved. Now, the option to send an Asset to a new or existing ACA Analysis is enabled when you select one or more Assets. | 673141 |
Asset Health Manager
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, in the Health Summary page, when you attempted to load a large number of assets, an error occurred. This issue has been resolved. | 676716 |
Asset Hierarchy
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when Asset Hierarchy was configured with site filtering, if you had limited site access, you could not interact with accessible assets that were nested within a disabled asset. This issue has been resolved. You can now select all accessible assets in the Asset Hierarchy irrespective of whether the parent asset is enabled or disabled. | 706929 |
Asset Strategy Implementation
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, Material records were not successfully being generated in SAP due to a NULL Material value in the Operation key when creating the Task List. This issue has been resolved. Now, the mapping Policy has been updated to include the correct Material value and the Material records are being successfully created. | 699134 |
| Previously, the query that drives the MAINTENANCE PLANS BY TYPE graph on the ASI Overview window was timing out in large databases. This issue has been resolved. Now, changes have been made to improve the performance of the query and eliminate the time out. | 630132 |
| Previously, the query that drives the Manage Actions section within the ASI Overview window was timing out in large databases. This issue has been resolved. Now, changes have been made to improve the performance of the query and eliminate the time out. | 630125 |
Asset Strategy Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To enable easy configuration in the cloud, the existing baseline field mappings between Asset Strategy and Asset Strategy Template families have been converted to Policies. | 615281 |
| The field mappings between Actions and Inspection Tasks have now been updated to append the Task Details field with the Action Description and Target Completion Date field, for both recurring and non-recurring tasks. | 652747 |
| Description | Tracking ID |
|---|---|
| Previously, when selecting assets to apply to a template, you could only use the Asset Finder. This issue has been resolved. Now, you can select assets using the Asset Finder or a baseline query that can be configured to meet your requirements. The query is located in catalog folder Public/Meridium/Modules/Asset Strategy Management/Management/Queries/Locate Assets For Template Application. | 715672 |
| Previously, you could not open or create an Asset Strategy when using a 64-bit Chrome browser and a configured risk matrix. This issue has been resolved. | 701316 |
| Previously, when applying a template to an Asset Strategy that contained Actions previously promoted from Reliability Centered Maintenance (RCM), the link between the original Actions and the Recommendations was not removed. This issue has been resolved. | 669159 |
| Previously, you could not open Asset Strategies if the Action Mitigated Driving Risk Alias field was configured to appear on the Action card. This issue has been resolved. | 687863 |
Asset Strategy Optimization
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to optimize an Asset Strategy, an error occurred. This issue has been resolved. | 584221 |
Calibration Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now configure the date filters used to display Calibration Tasks in the Calibration Queue section of the Calibration Management Overview page. To facilitate this enhancement, a new workspace named Overview Configuration is now added in the Calibration Admin Preferences page. | F84318 |
Data Loaders
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| A new version V2 of the SimpleIngest API is now available. Using this API, you can ingest records into APM for all the Data Loaders. The previous version, SimpleIngest API V1, allowed you to load data only for the records available in the Family Data Loader. | 714832 |
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to import a query that was exported from higher version of APM, then an error occurred. This issue has been resolved. | 694818 |
Documentation
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
As part of the GE Vernova rebranding efforts, the following enhancements have been added:
| 702014 |
| Description | Tracking ID |
|---|---|
| The section Upgrade or Update APM to V5.2.1.0.0 in the topic http://<apm_install_dir>/meridium/Help/DITAWebhelp/installation-upgrade-apm.html does not include the steps to upgrade from APM V5.2.0.0.0 to APM V5.2.1.0.0. Workaround: The following steps describe how to upgrade On-Premises APM from V5.2.0.0.0 through V5.2.0.1.0 to V5.2.1.0.0. The product documentation will be updated in the upcoming release.Upgrade from any version V5.2.0.0.0 through V5.2.0.1.0
| 826996 |
Failure Modes and Effects Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, the filter functionality in the Recommendations section of an FMEA Analysis did not work as expected. This issue has been resolved. | 710123 |
Family Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To retrieve data from third-party applications such as SAP, you can now configure behavior of a field to use a Remote Function Call (RFC) Finder. | 720062 |
| Description | Tracking ID |
|---|---|
| Previously, if a family was configured with more than 24 states, you could not scroll through the list to view all the states. This issue has been resolved. | 713261 |
| Previously, when creating or modifying the Required or Disabled behaviour for a date field, you could not use a data type other than the date type to create a condition. This issue has been resolved. | 699882 |
| Previously, for a family field, the Allow changing the properties of this field check box was always available irrespective of whether the field was inherited or not. This issue has been resolved. Now, the check box is enabled only when the field is inherited. | 697997 |
| Previously, after you saved a family field, the Active Status check box was disabled and you could not set the field status to Active or Inactive. This issue has been resolved. Now, if the field is not inherited, the Active Status field is available. | 694658 |
| Previously, in the Behavior section of a field, if you cancelled modifications to a static picklist and attempted to modify them again, the previous modifications were retained instead of resetting to the original state. This issue has been resolved. | 357848 |
Family Policies
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, if you modified the Entity node of a parent family, the family key of the child family was also modified if both the parent and child families contained common fields. This issue has been resolved. | 688275 |
Foundation
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| If you attempt to disable State Management for a family, a message appears now, asking you to confirm that you want to disable State Management. You can either proceed or cancel the operation. | 528476 |
| Description | Tracking ID |
|---|---|
| Previously, in the Asset Finder window, if you selected the Select Children check box, the check boxes for the child assets were not marked as selected although the child assets were included. This issue has been resolved. | 688067 |
General Dashboards
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, the solid gauge graphs in the KPI widget did not fit properly, appearing zoomed in with cropped edges. This issue has been resolved. | 694760 |
| Previously, even after you selected values in a field that allowed multiple selection, an error occurred, stating that a value was required. This issue has been resolved. | 694653 |
Generation Availability Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
The following types of unit start values for CEA Performance are now calculated:
| 533185 |
| Description | Tracking ID |
|---|---|
| Previously, data in the 05 Performance Report downloaded using bulk generation was sorted by month. This issue has been resolved. Now, the data is sorted by unit and then by month. | 721493 |
Previously, you could not change the state of a GAA Performance Fuel record if any of the following fields contained the value 0:
| 708715 |
| Description | Tracking ID |
|---|---|
| Bulk generation of the CEA Performance Calculation and Performance report is not implemented. In addition, Dashboard graphs and Unit Summary graphs will not display the expected data because they are not integrated with the new performance calculation that has been implemented for the CEA performance calculation and report workflow. | 744068 |
Inspection Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| When you change the state of an Inspection to Rework, the Final Inspection Lock and Inspection Lock fields are now reset to False. | 700707 |
| Performance has been improved when loading data using either the Inspection Management (IM) Assets or Inspection Management (IM) Functional Location data loaders. | 686794 |
You can now execute the Inspection baseline rules for custom inspection families using policies. To facilitate this enhancement, the following implementations have been added for use in the policy Rule node:
| 281247 |
| Description | Tracking ID |
|---|---|
| Previously, the Integrity Mobile app did not display the correct list of Inspection Tasks in the All Tasks section. This issue has been resolved. Now, up to 5000 Inspection Tasks are displayed, covering the ones that are due within the past six months and the upcoming six months. | 707048 |
| Previously, the Defer button was available even in a new unsaved Inspection Task although you could defer an Inspection Task only after you created it. This issue has been resolved. Now, the Defer button appears only after you create the Inspection Task. | 692040 |
| Previously, Inspection Reviewers or Inspection Team Members could view and download Inspections in the Pending Approval state even though these records did not allow for updates. This issue has been resolved. | 687788 |
| Previously, if you configured the recommendation statuses partially for state upgrade mapping, and then selected Update Records, the count of Status values was displayed incorrectly. This issue has been resolved. | 587052 |
Integrity Mobile
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| When you create an offline authentication pin, the pin is synchronized and stored in the APM Application Server. When you log in to a different device, the stored offline pin is retrieved from the APM Application Server and is available for offline authentication. | US614222 |
| Description | Tracking ID |
|---|---|
| Previously when viewing the offline form of an Inspection, if the form contained a field whose behavior was dependent on a field that was not included in the offline form, then that field and any fields that followed it in the form failed to render. This issue has been resolved. | 695008 |
| Previously, Inspection Reviewers or Inspection Team Members could view and download Inspections in the Pending Approval state even though these records did not allow for updates. This issue has been resolved. | 687788 |
| Previously, when uploading an Inspection without the related families configuration for offline inspections (such as General Findings, Sub-Inspections), if downloading Inspection Recommendations was disabled in the Inspection Admin Preferences page, the Inspection was partially uploaded and the sync process could not be completed. This issue has been resolved. Note: To resolve this issue, you must upgrade the APM Application Server to V5.2.0.0.0 or later. | 603647 |
OT Connect
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when performing a tag synchronization using the OT Connect OPC HDA Adapter, sometimes, an error occurred, stating that the index was outside the bounds of the array. This issue has been resolved. | 669301 |
Policy Designer
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now mark API Credentials entries as Private. If marked as Private, only you can access by login in the Policy Designer API node. | 364718 |
| Description | Tracking ID |
|---|---|
| Previously, if you modified the Entity node of a parent family, the family key of the child family was also modified if both the parent and child families contained common fields. This issue has been resolved. | 688275 |
Production Loss Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, in the Production Data window, the color code icon for the Unaccounted Loss status was not updated as expected. This issue has been resolved. | 709260 |
| Previously, when creating a new Production Loss record, an invalid warning message appeared, stating that the loss count already matched the reported actual production. This issue has been resolved. | 709259 |
| Previously, Historian data was not updated in a Production Plan. This issue has been resolved. To facilitate this fix, the underlying query that fetches the Historian data has been corrected. | 675935 |
| Previously, if State Management was disabled for the Production Event and Production Plan families, PLA workflows failed. This issue has been resolved. | 699359 |
| Description | Tracking ID |
|---|---|
| If State Management is enabled on the Production Plan family, the PLA Overview page query does not display the State column. You can provide an updated query to display the State column, if necessary. Additionally, if State Management is disabled for Production Plan, the data loader for PLA Production Plan does not function properly. | 740925 |
Queries
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
Previously, if the query results contained a large number of columns, when you printed the query results, some columns were cropped in the output. This issue has been resolved. To facilitate this fix, a new tool is used for printing, which provides various configuration options for better control over the content. You can access these options by selecting  and then Print Options in the query editor. | 696791 |
| Previously, if a query included a binary column, it was exported as System.Byte[]. This issue has been resolved. Now, it is exported as an empty string. | 660500 |
| Previously, you could not execute a query that contained multiple asterisks (*) to include all the columns from multiple families. This issue has been resolved. | 632326 |
Record Manager
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
You can now export data from a Bulk Data Form or a Master Detail Form to an excel format. To facilitate this enhancement, the Export button ( ) has been added to the Bulk Data Form. | 247986 |
| Description | Tracking ID |
|---|---|
| Previously, for read-only custom datasheets with no data, the user preferences were not retained in the Bulk Data Form. This issue has been resolved. | 660683 |
Reliability Analytics
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to create a demonstrated line for a Production Loss Analysis, the Regression Fit button did not appear in the Production Weibull Plot window. This issue has been resolved. | 699819 |
| Previously, several usability issues were present in the baseline Report generated from the Production Loss Analysis module. This issue has been resolved. Now, several usability issues within the baseline Report have been corrected including better layout, use of space, and size of logo. | 694990 |
| Previously, when you selected OK in the Edit Data window without changing the data, the results for a Reliability Growth Analysis were modified. This issue has been resolved. | 694874 |
| Previously, when you attempted to utilize the Break function within the Point Tooltip window, an error appeared. This issue has been resolved. | 691713 |
| Previously, an error appeared when deleting a Risk from the Analysis. However, when you refreshed the page, the Risk was successfully deleted. This issue has been resolved. Now, the selected Risk is deleted without the error message. | 691715 |
| Previously, the Reliability Growth Plot dates were displayed in UTC instead of the user time zone. This issue has been resolved. Now, the dates within the Reliability Growth plot will display in the user time zone. | 690482 |
| Previously, when you attempted to create an Automation Rule to create a Reliability Analysis, the Analysis was not linked with the correct Equipment or Functional Location. This issue has been resolved. | 686228 |
Reliability Centered Maintenance
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, the filter functionality in the Recommendations section of an RCM Analysis did not work as expected. This issue has been resolved. | 710123 |
Risk Based Inspection
This topic provides a list of product changes released for this module in this version.
RBI 580 and RBI 581
| Description | Tracking ID |
|---|---|
| To enhance usability, when applying a Component Type filter to the RBI Tree, any assets that do not have a matching component will no longer be displayed. | 708965 |
| The collapsible sections in an Inspection Plan can now be expanded. This allows you to access the relevant data in a single view by expanding the section. | 692538 |
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to apply an analysis to a new component with a Functional Location parent asset, the copied recommendations Asset ID field was not updated correctly if the RBI Global Preference Enable Recommendation To be Generated at Created State was true. This issue has been resolved. | 704587 |
RBI 581
| Description | Tracking ID |
|---|---|
| To enhance performance in loading the Risk Based Inspection Overview workspace, the catalog item Public\Meridium\Modules\Risk Based Inspection\Queries\Assets with No Recommendations has been updated. | 686229 |
| To enhance usability, the Highest Effective Inspection field on 581-HE Bundle Damage Mechanism Evaluations is now automatically set when linking inspections through the Inspection History workspace to the highest inspection confidence of the linked inspections, when the POF Method is set to Method 1 or Method 2. | 660796 |
| The RBI 581 ISO-Risk Plot now displays the SHE Risk Target and Financial Risk Target lines. The Analysis and Component ISO Risk plot target lines will be based on the SHE Risk Target and Financial Risk Target fields in the RBI 581 Risk Analysis. The Process Unit, Asset, and Corrosion Loop ISO Risk target lines will be based on the RBI 581 Admin Options. | 272715 |
| Description | Tracking ID |
|---|---|
| Previously, in some RBI 581 Risk Analyses with multiple Damage Mechanism Evaluations, the Risk Summary ID and Risk Summary Description fields were not populated when the Recommended Inspection Effectiveness was calculated as A. This issue has been resolved. | 689551 |
| Previously, the Calculated Susceptibility field was incorrectly set to Medium for 581-HIC/SOHIC – HF Damage Mechanism Evaluations when Product Form was Seamless/Extruded Pipe and PWHT was false. This issue has been resolved. Now, in this scenario, the Calculated Susceptibility will be set to Low. | 688880 |
| Previously, when calculating an RBI 581 Risk Analysis for a Storage Tank or Storage Tank Bottom component, if the Use Calculated Inventory field was set to true, and if the Inventory Component Mass and Inventory Group Mass fields were calculated as null, validation failed. This issue has been resolved. | 683236 |
Root Cause Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| When adding Team Members to a Root Cause Analysis for a specific site, only active users are now displayed. | 714973 |
| Description | Tracking ID |
|---|---|
| Previously, in the RCA Event Timeline, the Reset View to Default option was disabled even after the timeline view had been modified. This issue has been resolved. Now, the Reset View to Default option is enabled after the timeline view has been modified and you can click and reset the view to the default. | 706288 |
Rounds Pro
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now update or delete a Rounds Pro Schedule. | 669256, 549373 |
| Compliance Tracking System has been added. Using this, you can now analyse the readings, visualize the readings, and query the compliance history to identify the frequently missed readings. To facilitate this enhancement, a new Compliance Track entity family has been added in addition to several relationship families. | 369167 |
| The UOM field in the Step and Step Template windows is now a drop-down and data is populated from a System Code Table. | 164034 |
| Description | Tracking ID |
|---|---|
| Previously, the Is Ad-hoc field was not populated correctly. This issue has been resolved. | 690830 |
Rounds Pro Mobile App
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Rounds Pro mobile app is now available in a language as per your profile settings. | 677294 |
| Description | Tracking ID |
|---|---|
| Previously, the Step Readings data loader displayed an error when the instance name was not provided, and the data was not loaded properly. | 701363 |
SIS Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To enhance usability, you can select a logic solver that corresponds to the chosen analysis to create a Safety Instrumented System that will only show Instrumented Functions and related records linked to the selected Logic Solver. | 710068 |
| While importing EXP files, Sensor and Final Element IDs will now be copied from the imported file. However, this is applicable for EXP file only and not EXI files. | 698051 |
| Description | Tracking ID |
|---|---|
| Previously, Safety Instrumented System Tree failed to load when any Protective Instrument Loop Final Element or Protective Instrument Loop Sensor was linked to more than one Protective Instrument Loop Group within the same SIL Analysis. This issue has been resolved. | 715036 |
Previously, when you attempted to assign an existing Proof Test Task to an Instrumented Function or a Logic Solver, an error occurred. This issue occurred because a large amount of records were processed for exclusion, resulting in a timeout error. This issue has been resolved. To facilitate this fix, the following changes have been made:
| 701344 |
Previously, if the following fields did not contain a value, SIS Proof Test Details were not calculated correctly:
| 691076 |
Thickness Monitoring
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when viewing the TML trends graph, the initial plot point was not displayed completely. This issue has been resolved. | 676989 |