Open topic with navigation

ASO Workflow

The following steps represent a complete workflow for using ASO:

1. Open the Asset Strategy, System Strategy, or Unit Strategy from which you want to create an ASO Analysis.
2. Create an ASO Analysis from the strategy. When you do so, two scenarios will be created automatically:
   • An Active Scenario that represents the Active Strategy.
   • A Proposed Scenario that represents the Proposed Strategy.

3. Review the Diagram that was created automatically from the information in ASM, and modify as needed.

4. In the scenario that represents the Active Strategy:

   1. Provide values that will be used to yield accurate simulation results.
   2. Optimize Action intervals, define Resources, and define Global Events.

5. In the scenario that represents the Proposed Strategy:

   1. Provide values that will be used to yield accurate simulation results.

      Note: If the values provided are not accurate, the simulation will stop running, and the incorrect values will be highlighted in red until they are corrected.

   2. Optimize Action intervals, define Resources, and define Global Events.
   3. Add, modify, or remove Actions and Risks.

6. If the simulation results indicate that neither the Active Scenario nor the Proposed Scenario represents an acceptable strategy, suggest a new strategy. To do so, you can:

   • Modify the Proposed Scenario until it represents the suggested strategy.

     -OR-

   • Create a new Scenario to represent the suggested strategy. You can create the new Scenario in either of the following ways:

     • Create it from scratch.
     • Create it by copying the existing Active or Proposed Scenario.
7. Run a simulation, and evaluate the simulation results.

8. In the Scenario that represents the suggested strategy:

   1. Provide values that will be used to yield accurate simulation results.
   2. Optimize Action intervals, define Resources, and define Global Events.
   3. Add, modify, or remove Actions and Risks.
   4. Run a simulation.
   5. Evaluate the simulation results.
9. If you are not satisfied with the simulation results from the scenario, continue suggesting new strategies (by modifying the Proposed Scenario or creating new scenarios), running simulations, and evaluating the simulation results until you are satisfied with them.
10. When you have determined which scenario represents the most acceptable strategy, if it is not already the Proposed Scenario, set it as the Proposed Scenario.
11. Navigate back to ASM to continue managing the strategy as needed.

Copyright © 2018 General Electric Company. All rights reserved.