Open topic with navigation

Change the State of a Calibration

This topic describes how to change the state of a Calibration, while assigning each state to a user.

IMPORTANT:You can approve or reject a calibration only if you are member of the MI Calibration Administrator Security Group.

Steps

1. Access the Calibration for which you want to change the state.

   The current state of the analysis appears on the upper-right corner of the datasheet.

2. In the upper-right corner of the workspace, select the button that indicates the current state of the calibration. For example, if the current state of the calibration is In Progress, select the In Progress button.

   A drop-down menu appears, displaying a list of operations that you can perform on the analysis to change its state.

   

3. Select Manage State Assignments.

   The State Assignments window appears.

   

4. If not already done, assign the next state of the calibration to the appropriate user, and then select Done.
   
   The State Assignments window closes.
   

5. In the upper-right corner of the workspace, select the button that indicates the current state of the calibration. For example, if the current state of the calibration is In Progress, select the In Progress button. Then, select the necessary operation that will change the state of the calibration, and then select Done. For example, if you want to change the state of the calibration from In Progress to Pending Approval, select Propose, and then select Done.

What's Next?

• Propose a recommendation to improvise the calibration strategy.
  

Copyright © 2018 General Electric Company. All rights reserved.