Modifying a Predefined Configuration

To modify a predefined configuration:

1. In the Create Picture Wizard, from the Choose Configuration page, click the Modify Configuration button. The Modify Configuration dialog box appears.

NOTE: The Create Picture Wizard's Choose Configuration page is only available if you select Create Picture(s) from a Predefined Configuration in the Introduction page.

2. On the Attributes tab, select the attributes for each picture within the configuration.
3. On the Sizes tab, change the size or position of each picture.
4. To save your modified configuration, select one of the following options:

• Save – Saves the changes for this picture only.
• Save As – Saves the current options as a new configuration. When you select this option, the Enter New Configuration Name dialog box appears. Enter the name for the new configuration (up to 80 characters) in the Name field, then click OK to return to the Modify Configuration dialog box.

5. Click Return to Wizard. If you have unsaved changes, choose whether you want to save them or not. Click Yes to save the changes for this picture only, or click No to cancel the changes you made to the configuration and reset the attributes and sizes to their previous settings

6. The Choose Configuration page of the Create Picture Wizard reappears. Notice that the name you entered (if you saved the configuration under a new name) is displayed in the list on the Choose Configuration page.

TIP: If you mistakenly save a predefined configuration, select the unwanted configuration from the list on the Choose Configuration page and click Delete Configuration.

See Also