V4.6.2.0.0
Action Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, custom columns that you added in the Recommended Actions tab were not visible. This issue has been resolved. | US541383 |
| Previously, in the Implement Actions section, you were unable to implement an EAM Maintenance Plan when you selected actions from more than one asset. This issue has been resolved. | DE178296 |
| Previously, when you attempted to create a recommendation record and entered an invalid value in a field, the field was not validated, and the record was not saved. This issue has been resolved. | DE177957 |
APM Connect
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, the Spring4Shell vulnerabilities, CVE-2022-22965 and CVE-2022-22963, impacted the APM Connect Base V3.0.0 and UDLP V3.1.0, released with the APM V4.6.0.0.0. This issue has now been resolved by using the mitigation libraries. | US538741 |
|
Previously, the log4j2 security vulnerability, CVE-2021-44228, impacted the APM Connect Base V3.0.0 and UDLP V3.1.0, released with the APM V4.6.0.0.0. This issue has now been resolved by using the mitigation libraries. | US519944 |
APM Installation
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
|
Previously, the Revert to Baseline tool for state machines did not display the baseline states correctly. This issue has been resolved. Additionally, the UI access to the tool has also been enhanced. | DE181475 |
Asset Hierarchy
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, if you attempted to save a query-based group containing five assets or less as a static group, the group was created but the assets were not added to the group, and the Asset Group service may have shut down or its performance may have been degraded. This issue has been resolved. | DE180939 |
Calibration Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
|
You can now have more control on handling the unsaved results and unfinished tasks while performing Send to Calibrator using Fluke 74x- 75x or Fluke 729 FC Calibrators and also after performing Receive from Calibrator. To facilitate this enhancement:
| US527937 |
Family Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, with configuration and subsequent configuration changes, Family Metadata showed as duplicated. This issue has been resolved. | DE176442 |
| Previously, if you added custom fields that used SAP RFC integration to select the Work Center or Work Center Plant to a family, when you opened the family datasheet outside the Asset Strategy Integration module and accessed the Select a Work Center or Select a Work Center Plant window, no scroll bar appeared in the Search Results tab. This issue has been resolved. | DE176345 |
Generation Availability Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to generate the NERC GADS Event Report 07 or NERC GADS Performance Report 05, an error message appeared, and the reports were not submitted unless you manually formatted the fields that caused the error. This issue has been resolved. Now, the NERC Reports are generated as expected and you do not have to reformat the report content. | DE181072 |
| Previously, if an Event spanned across multiple years, there was a gap in the Event time between the end of year and start of new year. This issue has been resolved. Now, you can select the End Date Is Estimated? check box, which will set the correct time in the End Date field. | DE178406 |
| Previously, if you entered a decimal as the value of the Unit Capacity record, the value was not recognized during performance calculations and the Performance Record was not updated. This issue has been resolved. | DE178064 |
General Dashboard
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
|
Previously, when you accessed the Hyperlink Edit Widget window in the Edit Mode and selected browse, the Next and Cancel buttons did not appear as the scroll bar was missing. This issue has been resolved. | DE176239 |
Inspection Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, users with the MI Inspection group permissions added to their security roles were unable to create an Asset Technical Data. This issue has been resolved. | DE178132 |
Life Cycle Cost Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when an asset was linked as a primary element, the Link to Hierarchy was passing the entity key of the LCC element to the hyperlink and an error message appeared. This issue has been resolved. | DE180395 |
Queries
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to export the query results of an unformatted query, the exported data was different from the actual query results for the fields with Units of Measure (UOM) conversions. This issue has been resolved. | US529272 |
| Previously, if your culture setting was set to a language other than English, and you accessed the Query Results, the message text Drag a column header here to group by that column was not translated to the language based on your culture setting. This issue has been resolved. For more information on enabling translation, refer to KBA 000039427. | DE179290 |
| Previously, you were unable to run a single query to delete multiple records that are linked to the same successor record in the relationship family. This issue has been resolved. | DE178642 |
| Description | Tracking ID |
|---|---|
| When you attempt to create a cascading query, the Enter Parameter Values window keeps refreshing continuously and you are unable to update any field in this window. | DE176729 |
Risk Based Inspection
This topic provides a list of product changes released for this module in this version.
RBI 581
| Description | Tracking ID |
|---|---|
| Previously, when calculating a Thinning and Lining Damage Mechanism Evaluation where the Cladding field was set to true in the parent RBI 581 Risk Analysis, the Expected Metal Loss Fraction (Art) field was calculated using the incorrect cladding corrosion rate based on the Selected Base Material Corrosion Rate field. This issue has been resolved. Now, the Expected Metal Loss Fraction (Art) field is calculated using the cladding corrosion rate based on the Selected Cladding Material Corrosion Rate field. | DE181237 |
| Previously, when an RBI 581 Risk Analysis had both Thinning Damage and Lining Damage Mechanisms, and the Governing Damage Mechanism between Thinning and Lining differed on the Plan Date without Inspection and Target Inspection date, the Damage Factor with Plan was calculated incorrectly. This issue has been resolved. | DE175930 |
| Previously, as a multiple site user, when you created an RBI 581 Inventory group, the site was set based on the users default site instead of the Process Units site. This issue has been resolved. Now, a newly created RBI 581 Inventory Groups site is set based on the Process Units site. | DE175352 |
Record Manager
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To improve usability, for Reference Documents, you can now specify the network path for a folder in the Document Path field. | US525100 |
| Description | Tracking ID |
|---|---|
| Previously, if the Do not Include field in a conditional alert contained a value, the data in the email message was not formatted correctly. This issue has been resolved. | DE181476 |
| Previously, when you attempted to view a custom datasheet, if the help text was longer than the width of the field, it did not wrap correctly, and resulted in the help text being displayed under or over other elements. This issue has been resolved. | DE180065 |
Reliability Analytics
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, in System Reliability, when scenarios with very short action intervals are run in Monte Carlo simulation, the simulation will take a long time to complete. This issue has been resolved. Now, if you attempt to create an action interval of one hour or less, a message will appear stating that simulations with action intervals of less than one hour are not permitted. | DE180465 |
| Previously, when running Monte Carlo simulations, it was possible for a simulation to run indefinitely without completing. This restricted the server space for other users and for other queued simulations. This issue has been resolved. Now, a configurable limit of four hours has been set for a simulation run; once this limit is reached, the simulation run will be terminated. | DE180463 |
Reliability Centered Maintenance
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
|
Previously, when you sent an asset to RCM Analysis, if you had permissions only for the Strategy User and Foundation User roles, the risk details for Failure Effect were not filled in automatically. This issue has been resolved. | DE177944 |
Rounds Designer
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to navigate through a Route, a timeout error appeared while loading the dashboard. This issue has been resolved. | DE178506 |
| Previously, in the APM mobile application, if the Culture setting was Spanish, and you entered a reading value as a decimal with a comma separator, the comma was removed. This issue has been resolved. | DE176325 |
| Previously, after you completed taking readings on a Route, if you did not mark the Route done, the Route disappeared from the Overdue Items section. This issue has been resolved. | DE176011 |
Rounds Pro
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| If a route has more than 500 steps (irrespective of the number of assets), the Expand All functionality in the Sequence Route section will be disabled. Workaround: Expand one asset at a time. | US535222 |
| In the Rounds Pro Manager page, when you attempt to clear the applied filters at once, the filters are not cleared. Workaround: Select | DE175456 |
for every individual column to clear the applied filter.Rules
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you added a new field in a child family, the rules file was not generated for the newly added field. This issue has been resolved. | DE177203 |
Search
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
To enhance usability, in Advanced Search, you can now edit an existing search condition in the Conditions section. To facilitate this enhancement, a new edit icon ( ) appears in each condition box in the Conditions section. | US541827 |
Security Manager
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to create a new Conditional Alert record, if you selected an email recipient from the Fixed Distribution or the Optional Distribution List drop-down list box, and then saved the record, the Conditional Alert email was not sent to the recipient. This issue has been resolved. | DE181474 |
| Previously, when you ran the LDAP synchronization process with the Enable Password Change setting enabled, the synced users were unable to log in to the APM, and an error message appeared indicating that the user’s password has expired, even though the password had not expired in the Active Directory. This issue has been resolved. Additionally, if a synced user’s password has expired in the Active Directory, the user is now redirected to the Change Password window. | DE176961 |
SIS Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you applied template for Protective Instrument Loop, there was a performance issue and sometimes the process timed out. This issue has been resolved. | DE177097 |
Thickness Monitoring
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to view the TM Quick View page, the columns that displayed the measurement values according to the months in which they were measured, showed the abbreviated name of the month in the language assigned to the user’s culture rather than the language assigned to the user’s language setting. This issue has been resolved. | DE178379 |
| Previously, in the Measurement Data Entry workspace, when you saved the data for Thickness Measurement, and attempted to navigate to the next page, the data was not saved successfully. This issue has been resolved. | DE177255 |
| Previously, when you attempted to view Thickness Monitoring Locations (TMLs) in the Datalogger page, or if you attempted to send TMLs to the Datalogger, the inactive TMLs were not excluded by APM. This issue has been resolved. | DE176200 |
| Previously, in the Thickness Monitoring Datalogger page, if you sent Thickness Measurement Locations to the 38DL+ device that had the Number of Readings field set to a value greater than zero, and if the Location field was not set, the TML IDs were formatted incorrectly when sent to the device. Additionally, when you attempted to receive the file back in APM, an error occurred. This issue has been resolved. Note: To resolve this issue, you must install the latest Meridium Devices Service. | DE174875 |