V5.2.2.0.0
Action Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when using certain filter combinations on the Strategy Actions page within Action Management, the second page of results was not displayed. This issue has been resolved. Now, all pages of records will display properly when using filtering. | 862363 |
| Previously, when you selected a Recommendation that superseded another and selected the Linked Recommended Actions button to display the related Recommendations, the hyperlink to open the Linked Recommendations did not work as expected. This issue has been resolved. Now, all Linked Recommendations open in a new window when you select the hyperlink. | 738848 |
Advanced Visualization
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when running a query using the Advanced Visualization proxy, an error occurred. This issue has been resolved. | 903322 |
APM Connect
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now cancel a Data Loader job after it has been initiated. Note: Only the user who has initiated the job or an admin can cancel the job. | 83761 |
Asset Criticality Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to load data containing ACA Analyses in different states via the ACA Data Loader, an incorrect error message was displayed. This issue has been resolved. | 851294 |
| Previously, when loading data via the ACA Data Loader the number of rejected records was always displaying zero even if there were rejected records. This issue has been resolved. Now, the count of rejected records is being displayed properly in the data loader log. | 736776 |
Asset Health Manager
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to create a General Recommendation from Asset Health Manager after opening an RCA record from the RCA module, the RCA Recommendation datasheet was erroneously displayed. This issue has been resolved. | 737418 |
Asset Strategy Implementation
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| The ASI package functionality has been enhanced so that when the Cycle on a Maintenance Plan is modified, the Maintenance Plan shows a modified status indicator. | 855518 |
| The default value of Plant Maintenance has been added to the Priority Type field. | 853819 |
| Description | Tracking ID |
|---|---|
Previously, the Import from SAP functionality was failing if the existing Asset Strategy was in an active state. This issue has been resolved in the baseline database. However, existing customers must follow a workaround to manually resolve the issue:
| 892263 |
| Previously, in the search dialog of Maintenance Items, the EAM System filter was not applied for certain lookup fields. This issue has been resolved. | 853819 |
| Previously, when you configured certain fields with disabled behaviors, they were functioning incorrectly. This issue has been resolved. | 853819 |
| Previously, when you attempted to update the status of a Work Management Item (WMI) using a Family Data Loader, the status changed on the backend but did not reflect in the user interface. This issue has been resolved. Now, changes to the status of a WMI using a data loader are properly displayed in the user interface. Additionally, an ASI Admin option has been created to control whether Maintenance Plans and Items are displayed as Modified if any child WMI is modified. | 859107 |
| Previously, you could not export an Implementation Package when certain customizations were applied. This issue has been resolved. Now, you can successfully export Implementation Packages even if customizations are applied. | 816200 |
| Previously, the Link and Copy options were not displayed when importing a General Task List from SAP. This issue has been resolved. | 740391 |
| Previously, when importing a Task List from SAP, there was no indicator to show that the operation was in progress. This issue has been resolved. | 739376 |
| Previously, when you attempted to remove the value in the Cycle field in a Maintenance Package, an error occurred. This issue has been resolved. | 739360 |
| Previously, an error appeared in the Linked Actions section for a Maintenance Item, which prevented the linking functionality. This issue has been resolved. To facilitate this fix, the field length of the Maintenance Item Description field has been increased to 255 characters. | 739354 |
| Previously, when importing an Object List Item from SAP under a Maintenance Item, the busy indicator remained even after the import was completed. This issue has been resolved. | 738847 |
| Previously, if you deleted a Task List that was in an Added state [+], the child Operations were not deleted. This issue has been resolved. | 736775 |
Asset Strategy Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, on changing the state of an asset strategy from modified to proposed or from Pending review to Rework, random errors were getting generated. This issue has been resolved. | 875814 |
| Previously, when you created an ASO Analysis from a System Strategy where any Asset Strategies were Controlled by Master, the Optimize Strategy button was not getting disabled until you refreshed the screen. This issue has been resolved. Now, the Optimize Strategy button will be disabled when an ASO Analysis is created. | 870439 |
| Previously, you were unable to successfully open or create an Asset Strategy when using a 64-bit Chrome browser and a configured risk matrix. This issue has been resolved. | 868344 |
| Previously, when you approved an Inspection Plan and an Asset Strategy was created, and you attempted to open the Asset Strategy, an error was generated. This issue has been resolved. Now, the associated Asset Strategy opens without any error. | 867626 |
| Previously, after adding a Secondary Action to an Asset Strategy Template, an error appeared. This issue has been resolved. Now, no error is generated when adding a Secondary Action to an Asset Strategy Template. | 863862 |
| Previously, you were unable to activate an Asset Strategy Template when the strategy ID was same as the Secondary Action ID. This issue has been resolved. Now, you can activate Asset Strategy Templates that have the same ID as one of the Secondary Action IDs. | 826243 |
| Previously, when you promoted an action from Reliability Centered Maintenance (RCM) to Asset Strategy Management (ASM), errors appeared with the Undo Actions functionality and when deleting the associated Asset Strategy. This issue has been resolved. Now, these functions execute successfully without any errors. | 816219 |
| Previously, if you created a single risk with no Actions or if you unselected all the Actions in the Risk Analysis section, an error occurred. This issue has been resolved. | 677289 |
Asset Strategy Optimization
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, in the grid view, a validation error and red icon were not removed, even after data correction and saving. This issue has been resolved. | 858993 |
| Previously, the Action Optimization feature incorrectly updated the Action Description field within the associated Action in Asset Strategy. This issue has been resolved. Now, only the Action Interval and Interval Unit fields are updated, leaving the Action Description field unchanged. | 728642 |
Calibration Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| When performing automated calibration using a device, if the GE Device Service installed on your machine is not compatible with the APM version, a message appears in the Send for Calibration or the Receive From Device window, prompting you to install the latest version of the GE Device Service. | 859490 |
| You can now save the date range filter settings in the Calibration Queue section of the Calibration Management Overview page. The filter settings will not be overwritten by the date range preference under Admin settings, even after logging again. | 824828 |
Datasets
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to create a dataset from an Excel spreadsheet, if any cells contained formulas, such as VLOOKUP or CONCATENATE, the cells were not converted to their corresponding values. This issue has been resolved. | 649923 |
General Dashboards
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, in the General Recommendation section, selecting a target date value caused the field to become blank. This issue has now been resolved. | 619205 |
| Description | Tracking ID |
|---|---|
| When you add a widget to a dashboard that contains a filter, the filter criteria are not automatically applied to the new widget. Workaround: Reapply the filter on the dashboard:
| 721067 |
, and then select Generation Availability Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now include new EIA Energy Source fuel source code and Annual Energy Review fuel type code fields in the GAA Performance Fuel family. To facilitate this enhancement, the new fields are populated with the values present in the corresponding GAA Unit Entity whenever you create a performance record for a month and year for that GAA Unit. | 886367 |
| You can now generate bulk Performance Records for CEA units, including All Events and Excluding OMC records. | 851357 |
| The Unit Types for CEA units have been reviewed and adjusted to comply with the CEA Generation Manual 2019 document. | 710149 |
| You can now download Performance Reports for CEA units in bulk, either as single or multiple files. | 693293 |
Graphs
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now show the series name in the legend of a graph. To facilitate this enhancement, a new option named Show series name in Legendwith check box has been added to the graph settings. By default, this check box is not selected. | 866421 |
| You can now apply Point Padding, Show Label Outline, and Label Outline Color to heatmap graph types. To facilitate this enhancement, these options for the heatmap graph types have been added to the graph settings menu. | 857843 |
Failure Modes and Effects Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you were granted view permissions only to the MI RCM User security group, you could not perform the Save as Template function. This issue has been resolved. Now, you can successfully complete the Save as Template function if you have view only permissions to the MI RCM security group. | 865564 |
| Previously, there was a performance issue when accessing FMEA reports. This issue has been resolved. To facilitate this fix, the FMEA report catalog query Baseline\Meridium\Modules\FMEA\Analysis\FMEA Recommendations by System has been optimized, thus improving the performance. | 858775 |
| Previously, you could update an FMEA Analysis in an Approved state using the data loader. This issue has been resolved. Now, you are restricted from updating an existing FMEA Analysis in an Approved state. | 851293 |
| Previously, if a customer had configured master detail datasheet for the Functional Location family, a random error was generated when viewing an Asset record in an FMEA Analysis. This issue has been resolved. Now, no random errors will be generated when using a master detail configuration on the Functional Location family. | 850379 |
| Previously, when you attempted to consolidate one or more FMEA Recommendations, the resulting Consolidated Recommendation was defaulting to a Global Site. This issue has been resolved. Now, by default, the Consolidated Recommendation is created in the same Site as the Analysis. | 740025 |
Family Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now select Advanced Visualization reports as part of Family Reports and set them as default. To facilitate this enhancement, a new type, AdvViz, has been added to the report type drop-down list box to enable searching for these reports. | 906774 |
Family Policies
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To improve the User Experience, a new option Show errors in policy execution history and in the workflow where triggered is now introduced in Error Behavior for Family Policy, so that the same error that appears in the Policy Execution history, appears in the workflow that is triggered by selecting this option. | 709365 |
| Description | Tracking ID |
|---|---|
| Previously, if you attempted to provide a single value to a multi-value query using the Query node, an error occurred. This issue has been resolved. | 870801 |
| Previously, the email sent by the Email Contact node contained missing data in the table if the batch job used a language other than English. This issue has been resolved. | 867312 |
| Previously, when you validated a family policy that executed the Cancel Transaction node, incorrect rows were added to the execution history log. This issue has been resolved. Now, validation of the Cancel Transaction node does not write any entries to the execution history log. | 708791 |
Foundation
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now upgrade Elasticsearch to v8.17.x. Note: Elasticsearch v7.9.3.x is still supported in this version of APM. | 864423 |
| Description | Tracking ID |
|---|---|
| Previously, if a family project referred to a client library, Visual Studio was unable to locate and debug the client library project. This issue has been resolved. | 737173 |
Import and Export
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now import and export Advanced Visualization reports using the Import and Export tool. | 856308 |
Inspection Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
The Target Completion Date Filter setting in the Underlying Open Recommendations and Recommendations Due for Implementation sections has been enhanced as follows:
| 868392 |
| You can now manage Inspection Recommendations more efficiently. To facilitate this enhancement, a Recommendations tab has been added, allowing you to view, search, delete, and supersede Inspection recommendations. Note: The Recommendation panel has been removed from upper-right corner of the page. | 742506 |
Support for Deferrals has been extended for Inspection Recommendations. To facilitate this enhancement, the following changes have been made:
| 689133 |
| In the Inspection Management Data Loaders, the Inspection Profiles are now identified by the combination of Item Category and Item Description. This allows you to create multiple Inspection Profiles of the same category, provided you enter a different Item Description for each Inspection Profile. | 281783 |
To enhance usability, the following improvements have been implemented:
| 281055 |
| Description | Tracking ID |
|---|---|
| Previously, when you used the Inspection Management Assets or Inspection Management Functional Location Data Loader, and specified the task IDs in the Tasks Addressed field of an inspection in the Excel workbook, the Task Addressed field was not set correctly after performing the data load. This issue has been resolved. | 891027 |
| Previously, in the Inspection Management Overview page, when you attempted to delete an Inspection Task with a blank Task Type field, an error occurred and the Inspection Task was not deleted. This issue has been resolved. | 826725 |
| Previously, when rework was required on an approved inspection, the Inspection Report Owner and Reviewers Name fields were not updated to reflect the user who changed the state upon re-approval. This issue has now been resolved. | 707122 |
| Previously, the NR-13 Report failed to load because of performance issues in the Inspection Task Report query. This issue has been resolved. To facilitate this fix, the query has been optimized. | 737936 |
| Previously, the Equipment Technical Number field in the Inspections Family was limited to 50 characters. As a result, when creating an Inspection, if the Equipment Technical Number value was longer than 50 characters, an error occurred. This issue has been resolved. To facilitate this fix, the length of the Equipment Technical Number field has been increased to 255 characters. | 736557 |
| Description | Tracking ID |
|---|---|
| The UpdatePublishedState function and the Published field are now obsolete. | 688940 |
Integrity Mobile
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to access the All Tasks tab of the Integrity Mobile app, sometimes, a timeout error occurred. This issue has been resolved. Note: To resolve this issue, the following query has been modified to remove the column Existing Inspection and the LEFT JOIN on the MI_INSP_001 table:
If you have previously modified this query, you must either revert this query to baseline, or make similar modifications. | 891003 |
Metrics and Scorecards
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, the date values in timeline charts that were part of a KPI differed from the corresponding values in the tabular view. This issue has been resolved. | 870466 |
Policy Designer
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, if you attempted to provide a single value to a multi-value query using the Query node, an error occurred. This issue has been resolved. | 870801 |
| Previously, the email sent by the Email Contact node contained missing data in the table if the batch job used a language other than English. This issue has been resolved. | 867312 |
| Previously, when a Case node fetched inputs from a predecessor Condition node, the policy was executed without executing the Case node branch. This issue has been resolved. | 827653 |
| Previously, in an API node, the Add API Key authorization to option appeared regardless of the authorization type. This issue has been resolved. | 815659 |
| Previously, in the Policy Designer Overview page, in the Module Workflow Policies section, the search results did not appear if you set the UOM Conversion Set to a value other than none. This issue has been resolved. | 739694 |
Production Loss Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, there were performance issues when attempting to load the list in the Production Event Code field within a Production Event. This issue has been resolved. | 912604 |
| Previously, the hyperlink that was generated for a Production Event in the URL Builder utility was incorrect. This issue has been resolved. | 867212 |
Queries
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to export a query with a GROUP BY clause and a MIN or MAX function applied on a character field, an error occurred. This issue has been resolved. | 857132 |
| Previously, if you were using an Oracle database, the query export downloads page did not appear. This issue has been resolved. | 572214 |
| Previously, if a query contained multiple AND and OR conditions on the same columns, the conditions were used multiple times. This issue has been resolved. | 281265 |
Record Manager
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| In a Bulk Data Form and a Master Detail Form, you can now configure the column size to automatically fit the contents. To facilitate this enhancement, the Enable Auto-Fit Columns option has been added to the Table Settings window. This setting is saved as a user preference. | 270403 |
| Description | Tracking ID |
|---|---|
| Previously, any changes made to a record in the BeforeUpdate family policy did not reflect on the Bulk Data Form page, and no notification was displayed. This issue has been resolved. Now, a notification appears when you save the Bulk Data Form. | 861344 |
| Previously, when accessing an Asset in Record Manager, the complete list of families did not appear in the left pane under All Families. This issue has been resolved. | 857623 |
| Previously, if you set the behaviour of a date field, the behaviour evaluation failed. This issue has been resolved. | 739515 |
Reliability Analytics
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you renamed a Growth Analysis and saved the changes, the Last Event Date and Next Estimated Event Date fields were erroneously updated. This issue has been resolved. | 871182 |
Reliability Centered Maintenance
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you were granted view permissions only to the MI RCM User security group, you could not perform the Save as Template function. This issue has been resolved. | 865564 |
| Previously, you could update an RCM Analysis in an Approved state using the data loader. This issue has been resolved. Now, you cannot update an RCM Analysis in an Approved state. | 851293 |
| Previously, if you were not a member of the MI ASM Analyst Security Group, when you attempted to create an RCM Analysis, the datasheet did not load and no error was displayed. This issue has been resolved. Now, an error message appears. | 817627 |
| Previously, in the Recommendation tab of an RCM Analysis Template, the Recommendation ID link did not work as expected. This issue has been resolved. Now, when you select Recommendation ID field, the link opens the Recommendation datasheet. | 740050 |
| Previously, when you attempted to consolidate one or more RCM Recommendations, the resulting Consolidated Recommendation set to the Global Site by default. This issue has been resolved. Now, by default, the Consolidated Recommendation is created in the same Site as the Analysis. | 740025 |
| Previously, when attempting to apply an RCM/FMEA Failure Mode template, an error was generated if the Author Name field contained a user that was Inactive. This issue has been resolved. | 578685 |
Reports
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when importing field behavior with QueryList that included prompts for the second time, an error occurred. This issue has now been resolved. | 736109 |
Risk Based Inspection
This topic provides a list of product changes released for this module in this version.
RBI 580 and RBI 581
| Description | Tracking ID |
|---|---|
The Last Inspection Date field on RBI Degradation Mechanisms Evaluations is now mapped to newly implemented recurring Inspection Tasks. To facilitate this enhancement:
| 738994 |
The collapsible sections in the following workspaces can now be expanded:
| 710419 |
To enhance usability and improve contextual awareness, Schematic View (2D Visualization) has been introduced within RBI Corrosion Loops. This capability will allow you to:
| 365594 |
| Description | Tracking ID |
|---|---|
| Previously, the Process Unit Overview section of the Process Unit Asset View workspace timed out intermittently due to performance. This issue has been resolved. To resolve this issue, the Baseline/Meridium/Modules/Risk Based Inspection/Queries/Process Unit Asset View query has been updated. | 907809 |
| Previously when generating recommendations from the RBI Overview or Evergreening workspace, an error was erroneously displayed if no recommendations were generated. This issue has been resolved. Now, an error message will appears only if an issue occurs while generating recommendations. | 871770 |
RBI 581
| Description | Tracking ID |
|---|---|
RBI 581 Representative Fluid content have been updated with latest AIT values for the following flammable fluids:
| 897786 |
You can now override the calculated SHE Consequence Area on the RBI 581 Consequence Evaluation. The User SHE Consequence Area will then be used to calculate SHE Risk on the related Damage Mechanisms and parent RBI 581 Risk Analysis. Additionally, the User SHE Consequence Area will be mapped to the ISO Risk Graph and Risk Matrix. To facilitate this enhancement, the following fields have been added to the RBI Consequence Evaluation datasheet:
| 738990 |
| RBI 581 HE Bundle Damage Evaluation is now supported in the RBI 581 Data Loader and while exporting an RBI 581 Risk Analysis. To facilitate this enhancement, a new sheet DME_HEBundle has been added in the Data Loader template workbook. | 365261 |
| To improve usability, the fields related to cladding are now dynamically disabled based on the value set for the Cladding is Present field. To facilitate this enhancement, functionality has been implemented to disable all fields required for cladding when Cladding is Present is set to No. This change is applicable to the RBI Component, RBI 581 Risk Analysis, and RBI 581 Thinning and Lining families. | 261646 |
RBI 580
| Description | Tracking ID |
|---|---|
RBI 580 Representative Fluid contents have been updated with latest AIT and Flash Point values for the following flammable fluids:
| 699559 |
Root Cause Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
The RCA Event Timeline has been enhanced to provide a more intuitive way of creating and modifying Secondary Events. To facilitate this enhancement:
| 884081 |
button has been moved to the table heading.| Description | Tracking ID |
|---|---|
| Previously, the text in an RCA Event node label was displayed as distorted and outside the node boundary. This issue has been resolved. | 888282 |
| Previously, in the Communicate Findings tab, if you added a user and navigated to another tab, the changes were not saved. This issue has been resolved. Now, you are prompted to save before navigating to another tab. | 859793 |
| Previously, the Event Timeline was not adjusted based on the date criteria. This issue has been resolved. | 850003 |
| Previously, the Event Timeline layout was not intact if the event start date and end date were the same. This issue has been resolved. Now, there is a validation to prevent you from entering the same start and end dates. | 797935 |
Rounds Pro Mobile
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, for the APM application servers from V5.0.0.0 and later that were configured with SSO IDP authentication, the login page with the SSO button or authentication browser was not available in the Rounds Pro mobile app. This issue has been resolved. | 715915 |
| Previously, attachments from additional instructions were not downloaded onto the Rounds Pro mobile app. This issue has been resolved. Now, the attachments are downloaded if the Route with Images and attachments option is selected. | 574003 |
Rounds Pro
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| The integration of Lubrication Requirements functionality into Rounds Pro has been implemented to ensure easier adoption. | 711798 |
| You can now migrate Lubrication Requirements to Rounds Pro as Lubrication Steps. To facilitate this enhancement, the migration tool has been enhanced to simplify the migration process, allowing you to migrate Routes with both Measurement Steps and Lubrication Steps. | 711798 |
| To simplify the migration process, the migration tool has been enhanced to unlink the Operator Rounds Recommendations from Legacy Rounds Checkpoints and link them to the Rounds Pro Step Families. | 704299 |
| To simplify the migration process, the migration tool has been enhanced to migrate the Legacy Readings to Rounds Pro Step Readings. With this enhancement you will have an option to migrate the Readings from the Migration Tool. | 700755 |
| Language Localization support has been introduced in this release. All text will appear in the logged-in user’s language within the Rounds Pro application. | 574655 |
| Description | Tracking ID |
|---|---|
| Previously, when you saved your changes to a Step Template, you could not apply the changes to the corresponding steps. This issue has been resolved. | 867570 |
| Previously, when you attempted to create or modify a Health Indicator using the OT AHI Connector, the ID field was populated with the value in the Upper Level 3 column. This issue has been resolved. Now, the ID field contains the values in the Name and Description fields. | 859019 |
| Previously, if a user was made inactive when assigned to a route, the route was not editable, and you could not create route instances for that route. This issue has been resolved. Now, as long as the route has at least one active user assigned to it and the user belongs to the site of the route, you can create the route instances. | 740711 |
Security Manager
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, in LDAP sync, users with names in different cases in both AD and APM User details were not having their roles removed. This issue has been resolved. | 907821 |
| Previously, for a Security User, the timezone field incorrectly displayed Istanbul time as UTC +02:00 in the Details section. This issue has been resolved. | 826891 |
SIS Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now specify the order in which the PIF ID is generated during import from Exsilentia. To facilitate this enhancement, the PIF ID Settings section has been added to the SIS Admin Preferences page. | 857723 |
| The Last Date field in a Proof Test Task is now populated with the completion date of the associated Proof Test Event after closing the Proof Test Event. | 828274 |
You can now link an Inspection Task to multiple Instrumented Functions, provided that the Instrumented Functions are linked to the same Asset. To facilitate this enhancement, the cardinality for the following two relationship definitions has been changed to Many-to-Many:
| 243584 |
| You can now copy an Instrumented Function within the same SIL Analysis. | 168713 |
Thickness Monitoring
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now delete all the Schematic Data of an Asset. | 866494 |
To improve usability when sending and receiving/saving data from the GE DMS Go/Go+ datalogger, the Datalogger History family is now being used. TML records are now identified by entity keys stored in Datalogger History records rather than by Asset IDs and TML IDs. To facilitate this enhancement, the following changes have been made:
Note: You must install the latest version of the GE Device Service to use TM Dataloggers. Also, any TMLs sent to the DMS Go/Go+ device must be received and saved in APM before upgrading to V5.2.2. If needed, you can resend the TMLs to the device after upgrading to V5.2.2. | 827682 |
| Description | Tracking ID |
|---|---|
| Previously, when data was sent to the Olympus 38DL+ or Epoch 650 devices, the TML IDs were truncated to display only the first 16 characters, even though these devices support a maximum ID length of 20 characters. This issue has been resolved. Now, the TML IDs are truncated correctly to fit the 20-character limit. Note: To apply this fix, you must install the latest version of the GE Device Service. Additionally, though the IDs are now truncated properly, if a truncated ID results in duplicates within a file on the Epoch 650 device, readings will only be saved for the first TML with that ID due to a limitation of the Epoch 650 device. | 921820 |
Previously, users with certain roles could perform the following tasks:
| 851295 |
Workflow Solutions
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
To enhance drill-down capabilities, hyperlinks have been added to the Heat Map - Asset Count by Criticality, Health Indicator Status graph, and the Usage Over Time graph in the following workflow packages:
| 858000 |
To improve query performance, the query logic has been updated to include the Asset-Hierarchy (:ahhome) filter for the following Workflow packages where applicable:
| 862387 |
To improve query performance, the query logic has been updated to fetch the latest Criticality for the Asset in the queries for the following Workflow packages where applicable:
| 862387 |
To improve query performance, the Query for Hyperlink (Query - HeatMap to HI Details with Alert Level and Criticality_FL) has been optimized and renamed to eliminate unnecessary joins for Work-History in the following Workflow package:
| 862387 |
| Description | Tracking ID |
|---|---|
All instances of DORI (SHARP - Top-Level) Health-Indicators have been replaced with AHI (AHMA - Top-Level) Health-Indicators in the queries for the following Workflow package where applicable:
| 862387 |