V4.3.0.7.X Patch Release Notes
V4.3.0.7.20
This topic provides a list of product changes included in this patch.
Asset Criticality Analysis
| Description | Tracking ID |
|---|---|
| Previously, when you accessed GE Digital APM using a Chrome browser, there was a performance issue while saving records through the datasheet. This issue has been resolved. | DE152558 |
Asset Strategy Implementation
| Description | Tracking ID |
|---|---|
| Previously, when you accessed GE Digital APM using a Chrome browser, there was a performance issue while saving records through the datasheet. This issue has been resolved. | DE152558 |
Asset Strategy Management
| Description | Tracking ID |
|---|---|
| Previously, when you accessed GE Digital APM using a Chrome browser, there was a performance issue while saving records through the datasheet. This issue has been resolved. | DE152558 |
Calibration Management
| Description | Tracking ID |
|---|---|
| Previously, when you select a value for the Cylinder ID field, the Laboratory Number field was not populated in the Multi-Component Identification datasheet. This issue has been resolved. | DE154266 |
Failure Modes and Effects Analysis
| Description | Tracking ID |
|---|---|
| Previously, when loading data though dataloader, financial details were not updated as per the dataloader worksheet. This issue has been resolved. | DE152675 |
| Previously, when you accessed GE Digital APM using a Chrome browser, there was a performance issue while saving records through the datasheet. This issue has been resolved. | DE152558 |
Inspection Management
| Description | Tracking ID |
|---|---|
| Previously, if you logged in as a non-English user and managed the defined scope for an inspection task, the profile categories that were displayed were not translated properly. This issue has been resolved. | DE154386 |
Manage Translations
| Description | Tracking ID |
|---|---|
| Previously, if a graph, report, or dashboard contained in the GE Digital APM database was corrupted, when you attempted to export the untranslated metadata strings to a Microsoft Excel file, an error occurred. This issue has been resolved. Now, you can export the untranslated metadata strings successfully even if there is an error with the graph, report, or the dashboard. | DE153504 |
Policy Designer
| Description | Tracking ID |
|---|---|
| Previously, when you modified the language setting of the policy execution service user, the execution results and emails sent by the policies were not correctly translated. This issue has been resolved. | DE154294 |
Production Loss Analysis
| Description | Tracking ID |
|---|---|
| Previously, when PLA users with different culture settings created Production Plan Records for the same unit and start time using PLA Data Loader, you could create duplicate plans and no warning message appeared. This issue has been resolved. | DE154145 |
Queries
| Description | Tracking ID |
|---|---|
| Previously, if your culture setting was English, when you exported a query to an Excel file, the captions of the columns were blank. This issue has been resolved. | DE152902 |
Record Manager
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to update a record with an external hyperlink in the TEXT field or saved the record with an external hyperlink, an error occurred, and the datasheet did not load. This issue has been resolved. | DE155113 |
Reliability Analytics
| Description | Tracking ID |
|---|---|
| Previously, when a Reliability Automation rule was executed on existing reliability growth records, it would create duplicate records instead of updating the existing one. This issue has been resolved. | DE153460 |
Reliability Centered Maintenance
| Description | Tracking ID |
|---|---|
| Previously, when loading data though dataloader, financial details were not updated as per the dataloader worksheet. This issue has been resolved. | DE152675 |
| Previously, when you accessed GE Digital APM using a Chrome browser, there was a performance issue while saving records through the datasheet. This issue has been resolved. | DE152558 |
Root Cause Analysis
| Description | Tracking ID |
|---|---|
| Previously, in the Gate Type field of the RCA Logic Tree section, when you selected the AND or OR field, the fields were not translated based on the language setting of the user account. This issue has been resolved. | DE153295 |
| Previously, if your language setting was not English, and you accessed the Event Timeline diagram for an analysis, the event types were not translated to the language corresponding to your language setting. This issue has been resolved. | DE151814 |
Rounds Data Collection
| Description | Tracking ID |
|---|---|
Previously, the following issues were seen:
| DE147290 |
State Management
| Description | Tracking ID |
|---|---|
| Previously, if your culture setting had a culture other than English, the State Assignments option was not translated to the language based on your culture setting. This issue has been resolved. | DE154715 |
V4.3.0.7.19
This topic provides a list of product changes included in this patch.
Asset Strategy Optimization
| Description | Tracking ID |
|---|---|
| Previously, if you promoted a Reliability Centered Maintenance (RCM) analysis or Failure Modes and Effects Analysis (FMEA) to a strategy, and then attempted to optimize the actions of the strategy, the optimization of the actions took longer than expected. This issue has been resolved. | DE150356 |
Production Loss Analysis
| Description | Tracking ID |
|---|---|
| Previously, screen failed to render on certain devices or zoom settings. This issue has been resolved. To reduce the risk of the screen failing to render on certain devices or zoom settings, the settings for PLA have been modified to accept small screen devices. | DE150060 |
| Previously, even though Production Plan Records for the same unit and start time were available in multiple culture settings, you could create duplicate plans and no warning message appeared. This issue has been resolved for Time Based Plans that were not created as manual plans. Note:
| DE149759 |
Queries
| Description | Tracking ID |
|---|---|
| Previously, certain queries that contained parameter prompts and referenced other queries would unnecessarily recompute parameter values. This issue has been resolved. Now, parameter values are only recomputed when needed. | DE151796 |
| Previously, when you attempted to select a query prompt value in the prompt filter, the prompt values intermittently took longer than expected to appear and there was no indication that the operation of loading the values was in progress. This issue has been resolved. Now, a spinner appears when the values are being loaded. | DE150574 |
| Previously, when you exported a query using the CASTNUM and ROUND functions to an Excel file, the numeric values were exported as text. This issue has been resolved. | DE149973 |
RBI 581
| Description | Tracking ID |
|---|---|
| Previously, the Calculated T-min field on 581 Risk Analyses was calculated incorrectly when Geometry Type field value was Spherical Head or Hemispherical Head. This issue has been resolved. Now, the Calculated T-min field on 581 Risk Analyses is calculated using the updated formula. For more information about the formula, refer to KBA 000037009. | DE149233 |
Root Cause Analysis
| Description | Tracking ID |
|---|---|
| Previously, in RCA Recommendations, the fields did not appear in the language based on your language settings. This issue has been resolved. | DE148760 |
| Previously, in the Preserve Records section for a Root Cause Analysis, some of the fields were not translated based on the Language setting for your user account. This issue has been resolved. | DE141652 |
| Previously, in the Team Members section for a Root Cause Analysis, some of the fields were not translated based on the Language setting for your user account. This issue has been resolved. | DE137975 |
V4.3.0.7.18
This topic provides a list of product changes included in this patch.
Asset Hierarchy
| Description | Tracking ID |
|---|---|
| Previously, when you created an Asset Group based on a query, you could add a maximum of 25 assets to the group. This limitation has been removed. Now, you can add all the assets that are part of a query result. | DE147137 |
General Dashboard
| Description | Tracking ID |
|---|---|
| Previously, if a non-default filter was set to a Dashboard, if you navigated to a different page and returned to the Dashboard, the graphs on the Dashboard displayed incorrect results. This issue has been resolved. | DE145689 |
Queries
| Description | Tracking ID |
|---|---|
| Previously, when you exported a query to an Excel file, the alias for the exported column captions were displayed in the language in which the query was executed, regardless of your culture settings. This issue has been resolved. Now, in this scenario, the alias for the exported column captions are displayed in the language based on your culture setting. | DE148526 |
RBI 580
| Description | Tracking ID |
|---|---|
You can now calculate the RBI PRD Criticality Analyses in bulk from the Assets section of the following pages:
| US458084 |
RBI 581
| Description | Tracking ID |
|---|---|
The GE Digital APM application now calculates the Weighted Component Damage Consequence and Weighted Personnel Injury Consequence for any Toxic fluid which has a value in the following tables:
| US449655 |
The RBI 581 Analyses now allow AST Shell calculations for Component Type field value set to Storage Tank. To facilitate this enhancement, the following fields in the RBI 581 Consequence Evaluation family are now enabled if the Component Type field is set to Storage Tank, regardless of the related RBI Component family:
Note: To calculate an RBI 581 Risk Analysis in the following scenarios, refer to KBA 000036239:
| US449646 |
| Description | Tracking ID |
|---|---|
| Previously, for an RBI 581 Analysis with a related 581-Low Alloy Steel Embrittlement degradation mechanism, the Fracture Appearance Transition Temperature (FATT) field in 581-Low Alloy Steel Embrittlement Degradation Mechanism Evaluation was entered in Degrees Fahrenheit instead of Delta Fahrenheit. For a user with a Metric conversion set, this resulted in an incorrect Celsius value because the Unit of Measure for the field should be Delta Fahrenheit. As a result, the calculated value of the Damage Factor for the degradation mechanism was incorrect for a non-imperial user. To resolve this issue, follow the steps in KBA 000036913. | DE145877 |
Record Manager
| Description | Tracking ID |
|---|---|
| Previously, in the Document Path field, you could not specify the network path for a folder. This issue has been resolved. | US453636 |
| Previously, in a record, when you attempted to access a Reference document in a folder with a special character in the folder name, an error occurred. This issue has been resolved. | DE148818 |
| Previously, if you configured the Reference Document Server Credentials to access a distributed file system, when you attempted to link a reference document contained in the distributed file system to the reference document record an error occurred. This issue has been resolved. | DE146384 |
V4.3.0.7.17
This topic provides a list of product changes included in this patch.
APM Mobile Application
| Description | Tracking ID |
|---|---|
| Previously, in Rounds Data Collection, the offline recommendations data form did not display configured default values. This issue has been resolved and these values are now displayed on the form. | DE145136 |
Asset Strategy Implementation
| Description | Tracking ID |
|---|---|
| Previously, in the ASI Value Helper window, extra spaces in Functional Location IDs were not retained. Due to this, asset lookups in the SAP system failed. This issue has been resolved. | DE145380 |
Asset Strategy Management
| Description | Tracking ID |
|---|---|
| Previously, saving an action in a strategy took a long time. This issue has been resolved. | DE145371 |
Calibration Management
| Description | Tracking ID |
|---|---|
| Previously, in the Unit of Measure (UOME) system code and table, when you modified the UOM Code from upper case to lower case and attempted to create a Calibration Event record, an error occurred. This issue has been resolved. | DE145491 |
Inspection Management
| Description | Tracking ID |
|---|---|
| Previously, in certain cases, when you accessed the Inspection Management Overview page for an Asset and selected a tab, the corresponding section did not load, and displayed a blank space. This issue has been resolved. | DE143856 |
Record Manager
| Description | Tracking ID |
|---|---|
| You can now browse through the shared network to choose the file path and upload the reference document to GE Digital APM. | US295192 |
| Description | Tracking ID |
|---|---|
| Previously, when you tried to view the data through the result grid in the ASI workflow, the multiple spaces between the data (asset name) were reduced to a single white space. This issue has been resolved. | DE145174 |
Risk Based Inspection (RBI) 580
| Description | Tracking ID |
|---|---|
| Previously, when updating an RBI Component using the Risk Based Inspection (RBI) 580 Data Loader, if a cell in the RBI_Component worksheet was blank, the corresponding field in the RBI Component family was updated with a blank value in the GE Digital APM database. This issue has been resolved. Now, in this scenario, the value that previously existed in the field is retained. | DE144878 |
| Previously, the Inventory was not calculated correctly for an RBI Component when the Initial Fluid Phase is Gas. This issue has been resolved. | DE144876 |
Risk Based Inspection (RBI) 581
| Description | Tracking ID |
|---|---|
| Previously, when updating an RBI Component using the Risk Based Inspection (RBI) 581 Data Loader, if a cell in the RBI_Component worksheet was blank, the corresponding field in the RBI Component family was updated with a blank value in the GE Digital APM database. This issue has been resolved. Now, in this scenario, the value that previously existed in the field is retained. | DE144878 |
Root Cause Analysis
| Description | Tracking ID |
|---|---|
| Previously, you could not save a Root Cause Analysis with the target completion date that had passed. This issue has been resolved. | DE144521 |
| Previously, if State Management was enabled for a Root Cause Analysis and the analysis was in any state except Not Started, when you attempted to save the analysis as a template, an error message appeared. This issue has been resolved. | DE137971 |
Rounds Data Collection
| Description | Tracking ID |
|---|---|
| Previously, in Rounds Data Collection, the offline recommendations data form did not display configured default values. This issue has been resolved and these values are now displayed on the form. | DE145136 |
Security Manager
| Description | Tracking ID |
|---|---|
| Security has been improved with advanced encryption in GE Digital APM. | DE144385 |
Thickness Monitoring
| Description | Tracking ID |
|---|---|
| Previously, in the Thickness Monitoring Analysis Overview page, when you attempted to perform bulk analysis for a large number of assets, the analysis operation failed due to the high usage of memory. In addition, some assets that required calculation did not appear in the Assets Requiring a Calculation section because the Analysis Required check box of the corresponding asset and Thickness Monitoring Location (TML) records could not be cleared. These issues have been resolved. | DE142963 |
V4.3.0.7.16
This topic provides a list of product changes included in this patch.
APM Mobile Application
| Description | Tracking ID |
|---|---|
| Previously, when you were assigned to a Route through a team and scanned a tag or barcode from the GE Digital APM mobile application, the scan was not recognized by the device. This issue has been resolved. | DE139957 |
| Previously, in Rounds Data Collection, in the Overdue Items and Due Items sections, the value in the Due On or After fields was not refreshed as expected. This issue has been resolved. | DE139851 |
Asset Criticality Analysis
| Description | Tracking ID |
|---|---|
| Previously, if you accessed an Asset Criticality Analysis whose associated Risk Matrix record had the Use Aliases? check box selected, the Total Risk value on the risk assessment appeared as a numeric value instead of an alias value. This issue has been resolved. | DE140572 |
Asset Health Manager
| Description | Tracking ID |
|---|---|
| Previously, when you accessed the Health Indicator Source Trend page from Rounds Designer and modified the date range in the date filter, the date range changes were not applied. This issue has been resolved. | DE141418 |
Asset Strategy Management
| Description | Tracking ID |
|---|---|
| Previously, after deleting multiple actions, there was a performance issue while activating an ASM template. This issue has been resolved. | DE141603 |
| Previously, if an asset strategy template controlled the strategies associated with a system strategy, when you accessed the Risk Analysis workspace for the system strategy, the number of actions that appeared was incorrect. This issue has been resolved. | DE140703 |
Calibration Management
| Description | Tracking ID |
|---|---|
| Previously, when you added assets to a Calibration Profile, the applied profile that was created was in the Development state; the Template State value was not copied from the Profile Template to the applied profile. This issue has been resolved. | DE139733 |
Foundation
| Description | Tracking ID |
|---|---|
Previously, when you scheduled a recurring job in the scheduler with repeat intervals of more than 12 months using one of the following options, and then attempted to run the schedule, an error occurred.
Additionally, the scheduler workflow has been improved to run the jobs more efficiently. For example, if you schedule the workflow to run on the 31st day of every month, the scheduler service schedules the workflow on the last calendar day of every month. | DE140177 |
Inspection Management
| Description | Tracking ID |
|---|---|
| Previously, when there were multiple Taxonomy Classes or Types for the same category, Taxonomy Configurations were not correctly displayed in the IM Admin Preferences workspace. This issue has been resolved. | DE140670 |
Installation
| Description | Tracking ID |
|---|---|
| To improve security, you can now install the latest version of Redis on a Linux server. For more information on how to install Redis on a Linux server, refer to KBA 000036587. | US423311 |
Production Loss Analysis
| Description | Tracking ID |
|---|---|
| Previously, for a manual plan, in the Plan Details workspace, if you modified the date and time of the plan period, the time was changed to Coordinated Universal Time (UTC). This issue has been resolved. | DE140718 |
| Previously, in the Plan Details workspace, when you attempted to modify the planned production amount for the product, an error occurred. This issue has been resolved. | DE139429 |
| Previously, in the Production Data workspace, the value in the Over Accounted field was not rounded up or down according to the PLA Admin setting in the Production Profile. This issue has been resolved. | DE138710 |
Queries
| Description | Tracking ID |
|---|---|
When you use Microsoft SQL Server 2016 to access GE Digital APM, the date and time values returned by the queries that contain the following functions now appear in the time zone configured for your user account.
MeridiumAppSettings.xml file. For more information on configuring the queries to return the date and time values in the time zone configured for your user account, refer to KBA 000036352. | DE140204 |
| Description | Tracking ID |
|---|---|
| Previously, when you exported a query that contained a date field to an Excel file, format of the date was incorrect in the Excel file. This issue has been resolved. | DE140064 |
| Previously, when you ran GETDATE and GETUTCDATE query functions in formatted mode, the date and time values were converted to your timezone. This issue has been resolved. Now, the date and time values appear based on the GE Digital APM server settings. | DE140046 |
| Previously, in a query, if a hyperlink was used to pass the query results, the field values that contained Cyrillic and Chinese characters were ignored. This issue has been resolved. | DE139748 |
Record Manager
| Description | Tracking ID |
|---|---|
| Previously, in a shared network, if you selected a hyperlink that was referenced to a document to be downloaded using Google Chrome or the Microsoft Edge browser, the file was downloaded with an invalid name and extension. This issue has been resolved. | DE140380 |
| Previously, when you added the Disabled behavior to a multi-value character field of a family, and then accessed a record of the same family in Record Manager, the Disabled behavior of the field was not retained. This issue has been resolved. | DE139967 |
Reliability Analytics
| Description | Tracking ID |
|---|---|
| Previously, if a Spares Analysis contained multiple Spare Applications, the report for a Spare Application contained the data and failure distribution of the previously added Spare Application also. This issue has been resolved. | DE140148 |
| Previously, when modifying the Description for a Spares Analysis, if you exceeded the maximum character limit specified for the Description box, and then attempted to save the changes, a spinner appeared, and there was no indication that the changes could not be saved as the maximum character limit was exceeded. This issue has been resolved. Now, in this scenario, an error message appears, indicating that you exceeded the maximum character limit specified for the Description box. | DE139971 |
| Previously, in Reliability Analytics, if the data was entered manually through the data editor, when you accessed the data editor, the time did not appear based on your culture settings. This issue has been resolved. | DE138658 |
| Previously, if you accessed Probability Distribution Analysis chart using Microsoft Edge browser, when you selected Auto as the Distribution Type, the plots in the chart disappeared. This issue has been resolved. | DE137855 |
Rounds Data Collection
| Description | Tracking ID |
|---|---|
| Previously, in Rounds Data Collection, in the Overdue Items and Due Items sections, the value in the Due On or After field was not refreshed as expected. This issue has been resolved. | DE139851 |
Risk Based Inspection
| Description | Tracking ID |
|---|---|
| Previously, the Calculated T-min field in the 581 Risk Analyses was incorrectly calculated when the Geometry Type field value was Piping. This issue has been resolved. Now, the Calculated T-min field is calculated using the formula from the reference ASME B31.3, 2014 Edition. For more information on the formula, refer to KBA 000036403. | DE139695 |
| Previously, when the Online Monitoring field was set to Yes (Y) on the 581-Internal Component Lining Damage, a Damage Mechanism Evaluation, the Online Monitoring Adjustment was incorrectly set as 0.01. This affected the calculated Damage Factor field. This issue has been resolved. Now, as per the API 581 3rd edition specification, the Online Monitoring Adjustment is set to 0.1 when the Online Monitoring field is set to Yes (Y) on the 581-Internal Component Lining Damage a Damage Mechanism Evaluation. | DE139032 |
Root Cause Analysis
| Description | Tracking ID |
|---|---|
| Previously, if you used special characters in the description of an event, when you exported the RCA Event Timeline, the image was not exported. This issue has been resolved. | DE139970 |
| Previously, in RCA Event Timeline, for two events with the same start date, their flags overlapped vertically, and the content could not be read in full page view. This issue has been resolved. | DE138955 |
Previously, when you selected Zoom to Fit button ( ) in the RCA Event diagram, the diagram was not center aligned and did not fit in the canvas. This issue has been resolved. | DE137859 |
| Previously, if a Root Cause Analysis (RCA) was created from an RCA Template, you were not able to link an asset to the analysis. This issue has been resolved. | DE135458 |
SAP Adapters
| Description | Tracking ID |
|---|---|
| SAP Work History extraction interface has been enhanced to improve the performance of the synchronization process. | DE139313 |
Security Manager
| Description | Tracking ID |
|---|---|
| Previously, if you removed multiple Security Users from a Microsoft Active Directory Group, and then ran the LDAP synchronization process, the Security Users were not dissociated from the corresponding Security Role in GE Digital APM. This issue has been resolved. | DE142557 |
System Requirements
| Description | Tracking ID |
|---|---|
| Previously, if user authentication using SSO was enabled for GE Digital APM, when you attempted to access GE Digital APM using Google Chrome version 80 or a higher version, an error message appeared, and the login failed. This issue has been resolved. | DE141204 |
Thickness Monitoring
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to link a TML Group to RBI Components from the Thickness Monitoring module, and the Source of Calculated Corrosion Rate field of the RBI Components in the Risk Based Inspection module contained the value Component, an error message appeared. This issue has been resolved. | DE140580 |
| Previously, while saving data from a datalogger, the thickness measurement locations with similar identifications were updated with incorrect measurements. This issue has been resolved. | DE139139 |
V4.3.0.7.15
This topic provides a list of product changes included in this patch.
APM Mobile Application
| Description | Tracking ID |
|---|---|
| Previously, in Rounds Designer, if a set of checkpoints existed under a condition and one of the checkpoints was set to inactive, the subsequent checkpoints in the set did not appear in the GE Digital APM mobile application. This issue has been resolved. | DE422945 |
Asset Strategy Implementation
| Description | Tracking ID |
|---|---|
| To improve searchability, when importing task lists from SAP to GE Digital APM, you can now customize the search parameters that appear in the Locate General Task List window. To facilitate this enhancement, the Task List Import Parameter box has been added to the Asset Strategy Implementation Preferences workspace of the Asset Strategy Implementation Admin page. | DE138508 |
Foundation
| Description | Tracking ID |
|---|---|
When you use Microsoft SQ Server 2016 to access GE Digital APM, the date and time values returned by the queries that contain the MI_DatePart and DateName functions now appear in the time zone configured for your user account.For more information on configuring the queries to return the date and time values in the time zone configured for your user account, refer to KBA 000036352. Note: If you enable this option, the execution results of policies using queries may be impacted if the time zone setting for the Impersonation User configured for the Policy Execution Service is not set to UTC. | US426539 |
Hazards Analysis
| Description | Tracking ID |
|---|---|
| Previously, if you accessed an unmitigated risk matrix for a Consequence associated with a hazards analysis, and then selected Save or Cancel without modifying any value in the Unmitigated Risk Assessment window, the values in the Mitigated Risk fields of the Hazards Worksheet section disappeared. This issue has been resolved. | DE136993 |
Risk Based Inspection
| Description | Tracking ID |
|---|---|
Previously, release rate calculation in RBI 581 Consequence Evaluation was based on the value in the Release Fluid Phase field of the related RBI 581 Risk Analysis. This issue has been resolved. Now, the Release Rate calculation will be based on the Initial Fluid Phase field value in the RBI 581 Risk Analysis. In addition, for a user with unit of measurement conversion set assigned, Release Fluid Phase in the RBI 581 Risk Analysis was populated incorrectly for fluids where:
| DE137630 |
Rounds Data Collection
| Description | Tracking ID |
|---|---|
| Previously, in Rounds Designer, when a set of checkpoints existed under a condition, and one of the checkpoints was set to inactive, the subsequent checkpoints in the set did not appear in the Rounds Data Collection. This issue has been resolved. | DE422945 |
V4.3.0.7.14
This topic provides a list of product changes included in this patch.
APM Mobile Application
| Description | Tracking ID |
|---|---|
| Previously, when using Rounds Data Collection on an android device, a white space appeared and get locked when you tried going back to the Rounds Data Collection Overview page that has Due or Overdue list using the back-arrow key in the keypad. This issue has been resolved. | DE133281 |
Asset Hierarchy
| Description | Tracking ID |
|---|---|
| Previously, if you were not an administrator and attempted to access the Asset Hierarchy, it took longer than expected to appear. This issue has been resolved. Now, when loading the Asset Hierarchy, the performance is improved. | DE135265 |
Asset Strategy Management
| Description | Tracking ID |
|---|---|
The following enhancements have been done to the Controlled Strategies section:
| US413881 |
| Description | Tracking ID |
|---|---|
| Previously, in the System and Unit Strategies section, when you tried to access the Review Strategy tab, an error occurred. This issue has been resolved. | DE134350 |
| Previously, if you applied an asset strategy template as a master to an asset or functional location, and then modified the values of the Probability and Consequence records associated with a risk category without affecting the risk rank of the risk category, the updated values did not appear in the Risk Matrix for the strategy controlled by the template. This issue has been resolved. | DE134146 |
Inspection Management
| Description | Tracking ID |
|---|---|
| Previously, when you accessed the Integrity tab from the Asset Hierarchy page, the hyperlink for Inspection Management took longer to load, depending on the number of assets in the Asset Hierarchy page. This issue has been resolved. | DE132597 |
Metrics and Scorecards
| Description | Tracking ID |
|---|---|
| Previously, after you upgraded the GE Digital APM database from V3 to V4, KPI Measurement records were created with certain empty fields. This issue has been resolved. | DE131497 |
Production Loss Analysis
| Description | Tracking ID |
|---|---|
| Previously, when you created a plan using the Production Loss Analysis (PLA) 3-Plan data loader, the plan ID was generated with the US date format, irrespective of the culture setting of the logged in user. This issue has been resolved. | DE134550 |
| Previously, when you tried creating a Template for PLA Plans, the dropdown menu for Template duration was not localized and appeared in English only. This issue has been resolved. Now, the dropdown menu appears as per the selected language according to your culture setting. | DE132770 |
RBI 580 and 581
| Description | Tracking ID |
|---|---|
| Previously, when you accessed the Integrity tab from the Asset Hierarchy page, the hyperlink for Risk Based Inspection took longer to load, depending on the number of assets in the Asset Hierarchy page. This issue has been resolved. | DE132597 |
Record Manager
| Description | Tracking ID |
|---|---|
| Previously, when you scheduled the Conditional Alerts, the Conditional Alert emails were not sent at specified intervals. This issue has been resolved. Now, in this scenario you can schedule the Conditional Alert and receive email as per schedule. | DE131694 |
| Previously, when you scheduled multiple Conditional Alerts to be run at specified intervals, if a Conditional Alert executed with an error then all the alerts were not executed. This issue has been resolved. | DE121758 |
Root Cause Analysis
| Description | Tracking ID |
|---|---|
| You can now configure the Recommendations chart in the Overview section of the Analysis Summary workspace to display the number of recommendations based on their status. To facilitate this enhancement, a new catalog query has been created that can be used by the Recommendations chart to display the data. For more information on importing the catalog query to your GE Digital APM database, contact the GE Support Service. | US412546 |
| Description | Tracking ID |
|---|---|
| Previously, when you accessed a large RCA Logic Tree, a timeout error occurred. This issue has been resolved. Now, the load time to open logic tree is significantly improved. | DE136750 |
| Previously, if you were a member of the team associated with a Root Cause Analysis (RCA), you could change the state of the RCA from In Progress to Pending Approval only if you were assigned with the Principal Analyst role. This issue has been resolved. Now, irrespective of the team member role, you can change the state of the RCA if you are assigned to a security group or a security role that has privileges to change the states. | DE134640 |
| Previously, in RCA Event Timeline, when Event Flags were closely associated in time, the view was not separated and did not appear correctly even after adjusting the zoom. This issue has been resolved. | DE134054 |
| Previously, if you upgraded the GE Digital APM from V3 to V4, in the RCA Event Diagram, some Event Diagram nodes did not allow the existing text. This issue has been resolved. | DE133748 |
| Previously, when you accessed the RCA Event Diagram for existing analyses, some icons did not appear in the Palette section. This issue has been resolved. | DE133700 |
| Previously, in an RCA Logic Tree, even after specifying the hypothesis causes for Human, Physical, or Latent, when you returned to the design canvas, the red line was lost and reverted to black. This issue has been resolved. | DE132632 |
Security Manager
| Description | Tracking ID |
|---|---|
| Previously, if user account was locked in Microsoft Active Directory, then the user was also locked in GE Digital APM database. This issue has been resolved. Now, in this scenario the user will not be locked in GE Digital APM database, and after you unlock the users in Microsoft Active Directory, the users can access GE Digital APM. | DE131495 |
Thickness Monitoring
| Description | Tracking ID |
|---|---|
| Previously, when you accessed the Integrity tab from the Asset Hierarchy page, the hyperlink for Thickness Monitoring took longer to load, depending on the number of assets in the Asset Hierarchy page. This issue has been resolved. | DE132597 |
V4.3.0.7.13
This topic provides a list of product changes included in this patch.
Action Management
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to send actions to ASI from Action Management, an error occurred. This issue has been resolved. | DE132292 |
| Previously, when you performed state assignments for multiple recommendations in bulk, it was not assigned to all the selected recommendations. This issue has been resolved. | DE131762 |
Asset Strategy Management
| Description | Tracking ID |
|---|---|
| Previously, in the Risk Analysis workspace, when using a risk matrix with Max Risk Rank enabled, the proposed risk rank was incorrectly calculated. This issue has been resolved. | DE131323 |
| Previously, when using a risk matrix with a combination of non-financial category with a protection level and a financial category, an error occurred. This issue has been resolved. | DE130647 |
Family Management
| Description | Tracking ID |
|---|---|
| Previously, in some cases, if you attempted to delete custom fields (i.e., non-baseline) in a family, an error occurred. This issue has been resolved. | DE129386 |
Policy Designer
| Description | Tracking ID |
|---|---|
| Previously, the input values of a policy instance that were of string data type appeared incorrectly in the Validation workspace. This issue has been resolved. | DE132300 |
Production Loss Analysis
| Description | Tracking ID |
|---|---|
| Previously, in PLA Loss Reconciliation datasheet, the Equivalent Downtime Hours field would fail to populate the value in the loss datasheet. This issue has been resolved. | DE132680 |
| Previously, when you searched for Production Loss records using the global search box, and then attempted to open a loss record, an error message appeared. This issue has been resolved. | DE132676 |
Queries
| Description | Tracking ID |
|---|---|
| Previously, if you specified a value near to zero in the search criteria, after UOM conversion it was rounded to 0. It was also applicable to non-zero values. For example, 10.0000000001 was rounded to 10. This issue has been resolved. Now, the value remains as specified. However, you may see exponential values (i.e., power of x). | DE131953 |
| Previously, when a user ran the query and used GETDATE function, the time value displayed the time zone associated with the user who was logged in. This issue has been resolved. Now, a new UTC function is added to avoid date field conversion. |
|
Reliability Analytics
| Description | Tracking ID |
|---|---|
| Previously, when generating a comparison plot across several Reliability Growth Analyses (RGA) or Production Analyses, the colored chart lines indicating each source analysis were using the same shape symbol on the line. This was in conflict with the chart legend and was difficult for the user to differentiate by color. This issue has been resolved. | DE131883 |
| Previously, in System Reliability, when adding Global Events, the field titles and check boxes were misaligned. This issue has been resolved. | DE131550 |
| Previously, in Reliability Analytics, the charts from many of the diagrams did not contain the legends when they were printed or viewed in HTML format. This issue has been resolved. Now, all charts in the reports show the corresponding legends. | DE130663 |
Reports
| Description | Tracking ID |
|---|---|
| Previously, while generating SQL Server Reporting Services (SSRS) report, when you selected the check box for multiple parameters, an error occurred. This issue has been resolved. Now you can generate reports with multiple parameters. | DE125461 |
Rounds Data Collection
| Description | Tracking ID |
|---|---|
| Previously, when a route tried to load Rounds Data Collection (RDC) on an Android device, it failed due to the combination of the route size and structure, and an error "Uncaught RangeError: Invalid array length" appeared. In a few other cases, the route was unable to load, and the application would close. This issue has been resolved. Now, the app allows the route to load RDC without producing any error or crashing the device. | DE133373 |
| Previously, in the GE Digital APM mobile application, GIS timeout settings were handled incorrectly which caused a delay in taking the readings, even when the timeout was set to zero. This issue has been resolved. Now, the timeouts are being recorded correctly when the GE Digital APM mobile application is either offline or online. | DE131628 |
Single Sign-On
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to log in to GE Digital APM through windows devices using Single Sign-On (SSO) authentication, an error occurred. This issue has been resolved. Now you can login through windows device using SSO authentication. | DE130604 |
System Requirements
| Description | Tracking ID |
|---|---|
| Previously, if you accessed GE Digital APM using Chrome browser version 80 or higher, you may have experienced some issues. These issues have been resolved. | DE128759 |
Thickness Monitoring
| Description | Tracking ID |
|---|---|
| Previously, the TM Dataloggers page could not load large amount of data while sending Thickness Measurement Locations (TMLs) to the datalogger. This issue has been resolved. Now, to avoid issues related to saving and analyzing large amount of TML data while receiving, the operation has been moved to scheduler. | DE131736 |
| The performance of the Analysis Overview workspace and the TMLs section has been significantly improved. To facilitate this enhancement, the Based on field now appears as a hyperlink that allows you to access the Thickness Measurement Locations (TMLs) associated with the analyses in the Based on window. | DE130887 |
| Previously, in the TM Dataloggers page, when you selected the check box in the header of the Send To or Receive From sections, only the TMLs available in the current page were selected and the TMLs in other pages were not selected. This behavior did not allow you to send or receive all the TMLs at a time. This issue has been resolved. Now, if you do not select any TML in the grid and select the Send (in the Send To section) or Save (in the Receive From section) button, all the TMLs are sent or received respectively. | DE130886 |
Units of Measurement
| Description | Tracking ID |
|---|---|
| Previously, if you specified a value near to zero in the search criteria, after UOM conversion it was rounded to zero. It was also applicable to non-zero values. For example, 10.0000000001 was rounded to 10. This issue has been resolved. Now, the value remains as specified. However, you may see exponential values (i.e., power of x). | DE131953 |
V4.3.0.7.12
This topic provides a list of product changes included in this patch.
RBI 581
| Description | Tracking ID |
|---|---|
Previously, when calculating the mitigated risk on the plan date for External Cracking Degradation Mechanism Evaluation on an RBI 581 Risk Analysis, the age calculation did not consider the target inspection date. As a result, the Total Damage Factor With Plan field (RBI Degradation Mechanisms) contained incorrect values for the following damage mechanisms:
This issue has been resolved. | DE128755 |
Reliability Analytics
| Description | Tracking ID |
|---|---|
| Previously, if your language setting in GE Digital APM was not English, the options in the Frequency of Alert After Due Date drop-down list box of an RCA Verification contained unknown values. This issue has been resolved. Now, the list contains the translated values based on your language setting. | DE128989 |
| Previously, when accessing a System Reliability Analysis in certain instances, an error message appeared, and the analysis failed to open. This issue has been resolved. | DE127871 |
| Previously, in System Reliability, when adding nodes to a diagram, if a node was added before the previous change was saved, an error occurred. This issue has been resolved. Now, a spinner appears while the node is being added. | DE127548 |
Root Cause Analysis
| Description | Tracking ID |
|---|---|
| Previously, when creating an RCA from a template, if the assigned name was not unique, the analysis details were not saved, and you were forced to restart the process. This issue has been resolved. | DE129784 |
| Previously, if an RCA Analysis was created from a template, after adding a verification, the Analysis Definition appeared blank on the Definition datasheet. This issue has been resolved. | DE129507 |
| Previously, in the Root Cause Analysis page, in the My Analyses section, when you attempted to publish an RCA analysis, an error occurred. This issue has been resolved. | DE128258 |
| Previously, when viewing a Logic Tree diagram, if you specified the date of completion for a verification in the Date Completed box, and then saved the verification, the date of completion did not appear for the verification. This issue has been resolved. | DE125641 |
Rounds Designer
| Description | Tracking ID |
|---|---|
| Previously, when the same scan code was populated on multiple checkpoints or routes, you were only routed to the first checkpoint. This issue has been resolved. Now, a window appears that provides a list of matching checkpoints and routes, and then directs you to the checkpoint or route selected. Note:
| DE128661 |
V4.3.0.7.11
This topic provides a list of product changes included in this patch.
Action Management
| Description | Tracking ID |
|---|---|
| The performance of the Strategy Actions section in Action Management page has been improved. To facilitate this enhancement, the Strategy Actions catalog query at below location has been optimized: Public\Meridium\Modules\Recommendation Manager\Queries\All Strategy Actions For more information, refer to KBA: Management action functions in APM is timing out. | DE127212 |
Calibration Management
| Description | Tracking ID |
|---|---|
| Previously, while creating a Calibration Event, if the mandatory fields were blank, an error occurred. This issue has been resolved. | DE125898 |
| Previously, in the Calibration Event family, when you configured the Test Equipment ID field as a required field, and then attempted to save a Calibration Event record, an error occurred because the Test Equipment section of the record that contained the Test Equipment ID field was disabled. This issue has been resolved. | DE125897 |
Family Management
| Description | Tracking ID |
|---|---|
| Previously, in Configuration Manager, when you attempted to enter or modify a value in the User help text field, the value was not saved. This issue has been resolved. | DE124701 |
Queries
| Description | Tracking ID |
|---|---|
| Previously, the queries with a column comparison to a date constant that did not contain a time returned partial results, or no records were returned. This issue has been resolved. | DE125109 |
Root Cause Analysis
| Description | Tracking ID |
|---|---|
| Previously, when creating an Event diagram, the links between nodes were not retained after you saved the Event diagram. This issue has been resolved. | DE124686 |
| Previously, when creating an Event timeline in an RCA Analysis, the Event Flag spanned out of the canvas area. This issue has been resolved. | DE123975 |
Single Sign On
| Description | Tracking ID |
|---|---|
| Previously, if you logged in with SSO and the session timed out, the event details were not logged during the time out. This issue has been resolved. | DE123917 |
V4.3.0.7.10
This topic provides a list of product changes included in this patch.
Asset Criticality Analysis
| Description | Tracking ID |
|---|---|
| Previously, in the Criticality Assessment section, the total value for a category was incorrectly displayed as zero. However, the saved value was correct. This issue has been resolved. | DE125021 |
Asset Strategy Implementation
| Description | Tracking ID |
|---|---|
| Previously, when you modified a Work Management Item Child Definition record, the icon for its parent item was not automatically refreshed. This issue has been resolved. | DE123030 |
Calibration Management
| Description | Tracking ID |
|---|---|
| Previously, when you performed a manual square-root calibration, the RMS Error value was calculated incorrectly because the Input Measure AF and Input Measure AL values were not square-rooted. This issue has been resolved. | DE123000 |
| Previously, in the Calibration Event family, if you set any field as a required field, and then tried to save the record, the record was not saved, and the page became unresponsive. This issue has been resolved. | DE121914 |
Family Management
| Description | Tracking ID |
|---|---|
Previously, when a datasheet was disabled, the Associated Pages ( ), Save ( ), and More options ( ) buttons were not visible on the datasheet. This issue has been resolved. | DE121252 |
Production Loss Analysis
| Description | Tracking ID |
|---|---|
| Previously, using the Production Event data loader, you could not update the production event code under the related families. This issue has been resolved. | DE123937 |
Reliability Centered Maintenance
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to access an asset from the Linked Assets section of an analysis, an error occurred. This issue has been resolved. | DE121073 |
RBI 580
| Description | Tracking ID |
|---|---|
| Previously, if an RBI Criticality Analysis contained a related Chloride Stress Corrosion Cracking (CI SCC) or Hydrogen Stress Cracking (HSC) - Hydrofluoric Acid Degradation Mechanism, the value in the output fields was calculated incorrectly. This issue has been resolved. | DE121799 |
RBI 581
| Description | Tracking ID |
|---|---|
|
Previously, when the UOM conversion set was assigned to you, while calculating an RBI 581 Risk Analysis, the Risk Category field was calculated incorrectly. In addition, the output fields were calculated incorrectly for any of the following conditions:
This issue has been resolved. | DE121780 |
| Previously, when you calculated an RBI 581 Risk Analysis on a Storage Tank component that had a toxic mixture, the calculation failed. This issue has been resolved. | DE121707 |
Rounds Designer
| Description | Tracking ID |
|---|---|
|
The Scan to Unlock feature is now available in the GE Digital APM Mobile application. This feature works with both Bar Codes and NFC RFID tags. To enable this feature for a checkpoint, populate the Scan to Unlock? check box and Scan ID field in Rounds Designer. | US378667 |
| Description | Tracking ID |
|---|---|
|
When using the Scan to Unlock feature to unlock checkpoints, scanning different tags may trigger the interface to access checkpoints across multiple routes on the device. In the process of switching back and forth between routes, there is a possibility that when you scan a code for a checkpoint, the checkpoint will appear as unlocked, but the detail page does not open. Workaround: Press the back button on the device to navigate to the previous tab, and then re-scan the bar code or tag. The checkpoint will unlock and open for data entry. | US386702 |
Single Sign On
| Description | Tracking ID |
|---|---|
| You can now use only the following URL to access GE Digital APM using SSO: http://<SERVER_NAME>/meridium/index.html | DE120256 |
| Description | Tracking ID |
|---|---|
| Previously, while using SSO, if you attempted to access GE Digital APM, an error message appeared, indicating that the server was not found. This issue has been resolved. Now, you can navigate to the SSO login page. | DE120256 |
Thickness Monitoring
| Description | Tracking ID |
|---|---|
| Previously, when you performed the Minimum Thickness (T-Min) calculation for more than 400 thickness measurement locations from the T-Min Calculator workspace, an error occurred. This issue has been resolved. Now, a pagination has been introduced in the T-Min Calculator workspace to load 100 thickness measurement locations per page. | DE122077 |
V4.3.0.7.9
This topic provides a list of product changes included in this patch.
Asset Strategy Implementation
| Description | Tracking ID |
|---|---|
| Previously, when a Work Management Item (WMI) was being updated, you could navigate to and access other sections of the associated ASI Package. This issue has been resolved. Now, in this scenario, you cannot access other sections of the associated ASI Package. | DE119903 |
Calibration Management
| Description | Tracking ID |
|---|---|
| Previously, if you accessed GE Digital APM using an Active Directory account (LDAP user ID), performed an automated calibration, and then attempted to receive data into GE Digital APM, an error occurred. This issue has been resolved. | DE120971 |
Inspection Management
| Description | Tracking ID |
|---|---|
| Previously, when accessing an Inspection that contained exactly 25 General Finding related records, when you scrolled through the General Findings in the left pane, the system performed an infinite scroll. This issue has been resolved. | DE120364 |
Policy Designer
| Description | Tracking ID |
|---|---|
| Previously, if an entity that was specified as a trigger for automatic policy execution was modified more than once within a short time span (that is, less than one second), only one policy execution was triggered. This feature, which was implemented to prevent unintended duplicate policy executions, resulted in some intended policy executions being skipped. This issue has been resolved. Now, policy execution is triggered each time an entity is modified, except for policies that are triggered by new Readings added to a Measurement Location. Note: For policies that are triggered by new Readings added to a Measurement Location, duplicate policy executions are still prevented because the insertion of new Readings using the Rounds Data Collection module results in multiple entity updates. | US371381 |
| You can now configure a policy to create an execution history log record for all the executions or only the executions that result in an error. For more information about how to enable the Execution History Log Error Only setting, refer to KBA: V4.3.0.7.9 – Policy Designer – How to Enable Execution History Log Error Only setting. | US358708 |
Reliability Analytics
| Description | Tracking ID |
|---|---|
| Previously, in a Reliability Recommendation record, if you selected the Create Work Request check box, and then saved the record, the SAP Notification that was created did not contain the Equipment and Functional Location values associated with the record. This issue has been resolved. | DE119878 |
Risk Matrix
| Description | Tracking ID |
|---|---|
| Previously, when calculating risk using a Risk Matrix, the values specified in the Weight boxes of the associated risk category records were not considered in the calculation. This issue has been resolved. | DE120519 |
Root Cause Analysis
| Description | Tracking ID |
|---|---|
| Previously, in an RCA Recommendation record, if you selected the Create Work Request check box, and then saved the record, the SAP Notification that was created did not contain the Equipment and Functional Location values associated with the record. This issue has been resolved. | DE119877 |
Strategy Macros
| Description | Tracking ID |
|---|---|
| Previously, if you did not have Administrator or Super User privileges and you attempted to execute strategy macros from an Associated Page URL, an error occurred. This issue has been resolved. | DE121359 |
Thickness Monitoring
| Description | Tracking ID |
|---|---|
| Previously, if the measurements of a Thickness Measurement Location was at a high loss, and if you attempted to organize the Thickness Measurement Locations from the Organize TMLs workspace, an error occurred indicating that the calculation failed. This issue has been resolved. | DE120290 |
V4.3.0.7.8
This topic provides a list of product changes included in this patch.
Asset Criticality Analysis
| Description | Tracking ID |
|---|---|
| In the ACA Overview page, the performance when loading the tile counts has been improved. For more information, refer to KBA: 4.3.0.7.x - ACA Module Dashboard is getting time out always. | US371236 |
Asset Strategy Implementation
| Description | Tracking ID |
|---|---|
| The performance of the Manage Actions section in the ASI Package page has been improved. To facilitate this enhancement, the Manage Actions section has been modified to use the following Catalog query: Public\Meridium\Modules\Asset Strategy Management\Implementation\Queries\Get Actions For Package For more information, refer to KBA: 4.3.0.7.x – ASI – Unable to open some of the packages in ASI. | US367849 |
| Description | Tracking ID |
|---|---|
| Previously, an Asset Strategy Implementation package with large number of plans took a long time to load. This issue has been resolved. | US367133 |
| Previously, when you attempted to update linked Actions with the same action interval units, the Actions that were previously linked to the Work Management Item were no longer linked to the item. This issue has been resolved. | DE118995 |
Asset Strategy Management
| Description | Tracking ID |
|---|---|
| To enhance usability, the performance when loading the Risk Profile chart has been improved. | US371656 |
Compliance Management
| Description | Tracking ID |
|---|---|
| You can now manage API RBI Recommendations in the Inspection Plan page for the asset. The Inspection Plan page can now be configured to support viewing, managing, approving, and implementing API RBI Recommendations. Note:
For information about how to configure API RBI Recommendations for the Inspection Plan, refer to KBA 000034663. | US372385 |
Inspection Management
| Description | Tracking ID |
|---|---|
| Previously, the Inspection Management Overview page was filtered based on the asset hierarchy context, despite providing the unit key in the Uniform Resource Locator (URL). This issue has been resolved. Now, the Inspection Management Overview page is filtered based on the unit key you provide. | US372139 |
Policy Designer
| Description | Tracking ID |
|---|---|
| Previously, while accessing GE Digital APM using Internet Explorer 11, when you accessed a policy that contained a Health Indicator node, the policy did not load or took a long time to load. This issue has been resolved. | DE117312 |
Production Loss Analysis
| Description | Tracking ID |
|---|---|
| Previously, in the Production Event family, the Unit Key was stored in the Unit field. Due to this, when you ran a query for the Unit Name from the Production Event family, the Unit Key was returned. This issue has been resolved. For more information, refer to KBA: Configure Version 4 APM so that the Unit Name functionality works the same as in version 3.6 (for a v3 customer) or any v4 version prior to 4.3.0.7 (for a v4 customer) after upgrade. | DE118543 |
Reliability Analytics
| Description | Tracking ID |
|---|---|
| Previously, while accessing GE Digital APM using Internet Explorer, the System Reliability diagram with large number of assets and/or subsystems took a long time to load. This issue has been resolved. | DE117867 |
RBI 580
| Description | Tracking ID |
|---|---|
| Previously, for a Criticality RBI Component - Exchanger Bundle, when you copied an RBI Criticality Analysis or created a What-If Analysis from an RBI Criticality Analysis, and then calculated the analysis, the Final Phase and Final Phase Shell Side fields in the related Criticality Consequence Evaluation record were not populated. This issue has been resolved. | DE117518 |
| Previously, if the Override Minimum Required Thickness check box was selected for an RBI Criticality Analysis, the value specified in the Specified Tmin box was not considered while calculating the Estimated Half-Life for the Criticality Calculator External Corrosion Degradation Mechanism Evaluation. This issue has been resolved. | DE117516 |
Root Cause Analysis
| Description | Tracking ID |
|---|---|
| Previously, after assigning and saving a Hypothesis Verification in the RCA Logic Tree, if you changed the Team Member value in the Assigned to box, and then saved the record, the value in the Assigned to box was not retained. This issue has been resolved. | DE118375 |
| Previously, while accessing GE Digital APM using Internet Explorer, the RCA Logic Tree with large number of nodes took a long time to load. This issue has been resolved. | DE117013 |
Schedule Logs
| Description | Tracking ID |
|---|---|
| You can now run a background job on the last day of each month. To facilitate this enhancement, the Last Day of Month Schedule option has been introduced. | US367291 |
State Management
| Description | Tracking ID |
|---|---|
| Previously, when you saved a datasheet after changing the state, an error message appeared. This issue has been resolved. | DE116448 |
V4.3.0.7.7
This topic provides a list of product changes included in this patch.
Action Management
| Description | Tracking ID |
|---|---|
| Previously, in the General Recommendation datasheet, when the Alert Assignee When Due check box was selected for a record, alert email messages were not sent. This issue has been resolved. | DE116027 |
Asset Criticality Analysis
| Description | Tracking ID |
|---|---|
| Previously, if a field in a checklist was updated by a policy, the corresponding entity was not updated with the latest field value. This issue has been resolved. | DE114440 |
Asset Hierarchy
| Description | Tracking ID |
|---|---|
Previously, in the Hierarchy section of the Asset Finder window, the Add icon ( ) was intermittently disabled due to which you could not add an asset to an analysis. This issue has been resolved. | DE110477 |
Asset Strategy Implementation
| Description | Tracking ID |
|---|---|
| Previously, if you implemented a strategy maintenance plan in SAP, the unit for scheduling period appeared incorrectly. This issue has been resolved. | DE115380 |
Calibration Management
| Description | Tracking ID |
|---|---|
| Previously, after you upgraded the GE Digital APM database from V3 to V4, certain Calibration Events did not appear in the Calibration Events section. This issue has been resolved. | DE116429 |
| Previously, after you upgraded the GE Digital APM database from V3 to V4, in the Calibration Queue section, the records that existed in the database before the upgrade did not appear, because the existing Calibration Templates were not directly linked to the Calibration Tasks. This issue has been resolved. | DE116427 |
| Previously, after you upgraded the GE Digital APM database from V3 to V4, when you created a Calibration (Event) manually from a Calibration Task, saved the record, and then entered values for As Found or As Left in the Calibration section, the error percentages were not calculated. This issue has been resolved. | DE116426 |
| Previously, after you upgraded the GE Digital APM database from V3 to V4, when you attempted to create a Calibration (Event) manually from a Calibration Task, an error message appeared. This issue has been resolved. | DE116421 |
| Previously, when you added assets to a Calibration Profile, the Applied Profile that was thus created was in the Development state. The values in the Template State field was not copied to the Applied Profile from the Profile Template. This issue has been resolved. | DE116412 |
Failure Modes and Effects Analysis
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to promote a Recommendation that was created using the Failure Modes and Effects Analysis (FMEA) data loader, an error occurred. This issue has been resolved. | DE116212 |
| Previously, you could not consolidate the Recommendations that were created using the Failure Modes and Effects Analysis (FMEA) data loader. This issue has been resolved. | DE116023 |
Manage Translations
| Description | Tracking ID |
|---|---|
Previously, when managing translations for a family field through the globe button ( ), in the window for the localization of the field, if you did not provide translation for all the languages, when you attempted to use the family in a query, an error occurred. This issue has been resolved. | DE115260 |
Inspection Management
| Description | Tracking ID |
|---|---|
| Previously, when an inspection event was created for an asset for which the Inspection Profile records were defined and sequenced, and when the auto-generate findings for the selected inspection event family was enabled, the automatically created General Finding records were not arranged in the order of the values in the assigned Sequence field. This issue also existed in Inspection Field Data Collection when the inspection event was downloaded. The issue has been resolved. Now, when viewing an inspection event in Inspection Management or in Inspection Field Data Collection, the General Finding records are arranged in the order of the values in the assigned Sequence field. Note: If the Inspection Profile records do not contain a value in the Sequence field, or if the General Finding records have been manually created, the General Finding records are arranged in alphabetical order of the values in the Inspection Profile Item field. | DE115888 |
| Previously, you could not print Inspection Reports in bulk if the Inspection ID contained special characters that were not supported by the Windows operating system in a file name. This issue has been resolved. | DE115279 |
Policy Designer
| Description | Tracking ID |
|---|---|
| Previously, a policy that was configured to be triggered when an Entity was created or modified was intermittently not triggered when the trigger event occurred. This issue has been resolved. |
|
| Previously, an error message stating that the session had expired appeared periodically in the policy execution results. This issue has been resolved. | DE113039 |
Production Loss Analysis
| Description | Tracking ID |
|---|---|
| Previously, the Event ID was automatically generated in the format <Event ID> ~ <Unique Sequence Number>. The format has been changed to <Unit Name> ~ <Headline> ~ <Unique Sequence Number>, so that you can add information from the Headline field. | DE116525 |
| Previously, if you were assigned to the Production Loss Accounting Administrator Security Role and you attempted to remove the mapping between an Impact Code and an OEE Code, an error occurred if the mapping was used in a Production Loss record. This issue has been resolved. | DE115705 |
| Previously, the State Management functionality was not activated even if you had enabled the State Management functionality. This issue has been resolved. | DE115597 |
| Previously, if the values in the Product Name and Product Alias fields of a Production Profile were different in GE Digital APM or in the Production Loss Analysis (PLA) 1-Admin Data Loader, when you attempted to import Production Plans for the Production Profile using the Production Loss Analysis (PLA) 3-Plan Data Loader, the import job failed. This issue has been resolved. | DE115364 |
| Previously, when reconciling production losses, you could not modify the estimated downtime value in the EDT field. This issue has been resolved. | DE115081 |
| Previously, the list of active Products that appeared when creating or modifying Production Profiles, Plan Templates, and Production Plans were not sorted numerically. This issue has been resolved. | DE114902 |
| Previously, when you attempted to create a Production Plan using a Plan Template, the Plan End Time was not automatically set based on the Plan Start Time. This issue has been resolved. | DE114901 |
| Previously, when creating a Production Plan for a given Production Unit and start date, if another Production Plan already existed for the same Production Unit and start date, a warning message did not appear to indicate the possibility of creating a duplicate Production Plan. This issue has been resolved. | DE114900 |
Reliability Centered Maintenance
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to promote a Recommendation that was created using the Reliability Centered Maintenance (RCM) data loader, an error occurred. This issue has been resolved. | DE116212 |
| Previously, you could not consolidate the Recommendations that were created using the Reliability Centered Maintenance (RCM) data loader. This issue has been resolved. | DE116023 |
Root Cause Analysis
| Description | Tracking ID |
|---|---|
| Previously, if you had created a customized message using a custom rule, when you attempted to publish an RCA that was refrained from being published, the Internal Server Error message appeared, instead of the customized message. This issue has been resolved. | DE116153 |
| Previously, when you attempted to link an asset to an Analysis, you could not find a list of Production Events associated with the Asset in the Linked Events section. This issue has been resolved. Now, you can find a list of events associated with the Asset and link them to the Analysis. | DE115273 |
| Previously, when exporting the RCA Event Diagram to the SSRS Comprehensive Analysis Report, the resolution of large diagrams was poor when you zoomed in on them. This issue has been resolved. | DE113894 |
Rounds Data Collection
| Description | Tracking ID |
|---|---|
| Previously, when you used the GE Digital APM mobile application to collect data, you could view a list of Routes that were not assigned to you. This issue has been resolved. | DE115280 |
Rounds Designer
| Description | Tracking ID |
|---|---|
| Previously, while adding a reading for a Checkpoint with the character ML type and the allowable values defined, the Reading Value Character box appeared as a text box instead of a drop-down list box until the reading was created. When you attempted to modify the reading later, the Reading Value Character drop-down list box appeared with appropriate values. This issue has been resolved. | DE115524 |
Security Manager
| Description | Tracking ID |
|---|---|
Previously, you could access a Map query in the Maps tool only if you had one of the following privileges:
This issue has been resolved. Now, all the GE Digital APM users can access the Map queries in the Maps tool. | DE115905 |
Thickness Monitoring
| Description | Tracking ID |
|---|---|
| To enhance the performance of the Thickness Monitoring Analysis Overview workspace, duplicate network calls have been removed. | DE115278 |
| Previously, after collecting data using the DMS Go+ device, if the Send button was held for more than two seconds, the device would also store an A-Scan reading. In addition, the APM Thickness Monitoring Datalogger could not process the file containing an A-Scan or display the readings. These issues have been resolved. Note: GE Digital APM Thickness Monitoring does not store the A-Scan data stored on the device. You must upgrade Meridium Device Service application to the latest version. | DE114988 |
SAP Adapters
| Description | Tracking ID |
|---|---|
| Previously, when using multiple culture extraction from SAP, the numbering format changed for some numbers, resulting in abnormally large numbers loading to GE Digital APM. This has been corrected. | DE115517 |
V4.3.0.7.6
This topic provides a list of product changes included in this patch.
Asset Strategy Management
| Description | Tracking ID |
|---|---|
| Previously, the financial risk in the Risk Matrix was incorrectly calculated for users whose culture setting was not English. This issue has been resolved. | DE114328 |
| Previously, in the Strategy Details page, in the Risk Analysis section, the COST PROJECTION chart was plotted with incorrect values for users whose culture setting was not English. This issue has been resolved. | DE113713 |
Data Loaders
| Description | Tracking ID |
|---|---|
Previously, when you attempted to import large analyses using the following data loaders, the operation exceeded the timeout period, causing the import process to fail.
| DE113340 |
Queries
| Description | Tracking ID |
|---|---|
| Previously, if conditions were defined for a query, and if you attempted to add a condition in the Or row of the Conditions section, an error occurred. This issue has been resolved. | DE112501 |
RBI 580 and RBI 581
| Description | Tracking ID |
|---|---|
| Previously, when you applied a Criticality RBI Component – Cylindrical Shell component that contained the value Storage Tank in the Component Type box, an error message appeared. This issue has been resolved. | DE113179 |
RBI 581
| Description | Tracking ID |
|---|---|
| Previously, the formula for calculating the Expected Metal Loss Fraction (Art) for components with or without cladding or weld overlay did not adhere to API RBI 3rd Edition Addendum 1. This issue has been resolved. | DE113180 |
| Previously, irrespective of the Unit of Measure (UOM) Conversion Set configured for your user account, the Consequence of Failure and Risk Values on the RBI 581 ISO-Risk Plot appeared in imperial units. This issue has been resolved. | DE113033 |
Root Cause Analysis
| Description | Tracking ID |
|---|---|
| Previously, if the user account of a Security User who was a member of the RCA team was inactive, the remaining members of the RCA team could not create a Recommendation. This issue has been resolved. | DE113568 |
Rounds Designer
| Description | Tracking ID |
|---|---|
| Previously, when you used the Rounds Routes Data Loader to import Routes that contained Checkpoint Tasks, the schedules were not populated correctly. This issue has been resolved. Note: To fix this issue for Routes that were imported in a previous version, complete the data in the MI_CP_TASK0 worksheet, and then reimport the Routes. | DE113012 |
Thickness Monitoring
| Description | Tracking ID |
|---|---|
| Previously, when you calculated an analysis for an asset, you could not perform any other operation while the calculation was in progress. This issue has been resolved. Now, you can close the window that displays the progress of calculation, and perform other operations while the calculation continues in the back end. You can view the calculation details from the scheduler window. | DE113183 |
Units of Measure and Conversions
| Description | Tracking ID |
|---|---|
| Previously, in the UoM field, when you searched for a converted value, the search was applied on the original UoM data instead of the converted value in a query result. In addition, the issue data was not filtered correctly. This issue has been resolved. Now, the search on the UoM field works according to the User conversion set. | DE113353 |
V4.3.0.7.5
This topic provides a list of product changes included in this patch.
APM Connect
| Description | Tracking ID |
|---|---|
| APM Connect now supports UDLP V2.6.1. The data loader framework in UDLP V2.6.1 is compatible with GE Digital APM V4.3.0.7.5. | US354669 |
| The automatic data loaders are now supported in APM Now. Using these data loaders, you can automatically import data into GE Digital APM. | US354406 |
| The SAP Equipment and Functional Location technical characteristics are now supported for multiple language data extraction. | US351143 |
| Description | Tracking ID |
|---|---|
| Previously, when using automatic data loaders, if multiple records were imported at the same time, sometimes, a few records were skipped. This issue has been resolved. | DE111514 |
| Previously, Apache Karaf crashed in the cloud environment because of the way the APM Connect data loader job handled the conversion of the .xlsx file to a .csv file. This issue has been resolved. Now, the .xlsx file is converted to a .csv file before it is sent to Apache Karaf. | DE111512 |
| Previously, when using automatic data loaders, an error message appeared although the records were imported successfully. This issue has been resolved. | DE111339 |
| Previously, the Planned Work and Work Management Interface integration did not allow filtering by Maintenance Plant. This has been resolved. You can now use Maintenance Plant as a filter for Planned Work and Work Management Interface. | DE110851 |
| Previously, if the connection between the PDI service and the OPC servers was lost for longer than the restart wait time (as configured in the ServiceRestartDelay parameter in the PDI configuration file), the connection was not restored. This issue has been resolved. | DE110733 |
Family Policies
| Description | Tracking ID |
|---|---|
| Previously, in the Properties window for a Create Entity node, if you specified values for more than two fields of the new entity, and then saved the policy, when you reloaded the policy, sometimes the values of only the first two fields were retained. This issue has been resolved. | DE111238 |
| Previously, when you attempted to modify a record that triggered an After Update family policy containing a Baseline Rule node, and if the baseline rule configured for the Baseline Rule node updated the same record that triggered the policy, a time-out error occurred and the record was not modified. This issue has been resolved. | DE110458 |
| Previously, when a vector output of an R Script returned only one value during the execution or validation of a policy, an error occurred. This issue has been resolved. | DE110279 |
Policy Designer
| Description | Tracking ID |
|---|---|
| Previously, in the Properties window for a Create Entity node, if you specified values for more than two fields of the new entity, and then saved the policy, when you reloaded the policy, sometimes the values of only the first two fields were retained. This issue has been resolved. | DE111238 |
| Previously, when a vector output of an R Script returned only one value during the execution or validation of a policy, an error occurred. This issue has been resolved. | DE110279 |
Reliability Analytics
| Description | Tracking ID |
|---|---|
| Previously, in System Reliability, you could not run a simulation for a System Analysis with frequent failures in risks or with a value in the Last Failure field. An error message appeared, stating that the p parameter must contain a value between zero and one. This issue has been resolved. | DE110846 |
Rounds Data Collection
| Description | Tracking ID |
|---|---|
| Previously, while using the GE Digital APM mobile application to collect data, you could not scan bar codes that were longer than 11 characters. This issue has been resolved. Now, you can scan bar codes that have a length of up to 20 characters. | DE110128 |
SAP and SAP PI UDLP V2.7.0
| Description | Tracking ID |
|---|---|
| Previously, GE Digital APM created placeholder records for assets that did not exist when a Work History record was loaded. Now, the system does not create the placeholder records, but logs such records as 'Work History records need to be reprocessed'. | US347758 |
| Previously, Maintenance Plan records without Task Lists or Operation Objects were not discontinued by the Work Management Adapter. Now, the adapter correctly discontinues the Maintenance Plan records. | DE105578 |
| Previously, Inspection Task records with long text that exceeded 1,000 characters created long text in SAP with invalid characters in the format field. Now, the format field contains valid characters. | DE105547 |
| Previously, the system incorrectly mapped MI_REC_TARGE_COMPL_DATE_DT entity to Target Completion Date in SAP. This resulted in failed creation of Notification records. Now, the system maps the MI_REC_TARGE_COMPL_DATE_DT entity to the correct date, resulting in the successful creation of a Notification record. | DE105459 |
| Previously, SAP PI source files were not deleted from the shared folder. Now, the system deletes these files. | DE79645 |
V4.3.0.7.4
This topic provides a list of product changes included in this patch.
Activate Licenses
| Description | Tracking ID |
|---|---|
| Previously, when you activated a license, you had to manually take the data source to which you applied the license offline, and then bring it back online. Now, after activating the license, you must log off from GE Digital APM and log in again. | DE109678 |
APM Data Extraction
| Description | Tracking ID |
|---|---|
| Previously, when you tried to fetch navigation (relationship) property data using a property request call, the service returned an HTTP 404 error. This issue has been resolved. | DE109958 |
Asset Health Manager
| Description | Tracking ID |
|---|---|
| Previously, in the <Asset Name> workspace, links for Asset Health Manager did not appear. Additionally, when you accessed the Health Summary page, the page loaded slowly, and error messages appeared. This issue has been resolved. | DE108371 |
| Performance in the Risks section of the Health Summary page has been significantly improved. | US338922 |
Asset Strategy Implementation
| Description | Tracking ID |
|---|---|
| To enhance performance and scalability, in ASI, the implement package operation has been converted to a job. | US348194 |
| To enhance usability, in the ASI Package workspace, importing a task list is now a background operation. | US348193 |
| To enhance usability, in the ASI Overview page, performance when loading large implementation packages has been improved. | US348192 |
Calibration Management
| Description | Tracking ID |
|---|---|
| Previously, when CalibDeviceMappingsUpgradeUtility was run to upgrade to 4.3.0.0.0 or later for replacing the old Device Mapping IDs with the new Device Mapping IDs on all the existing templates, an error occurred. Due to this, you could not perform calibration on the old templates using Fluke calibrator. This issue has been resolved. Note: The upgrade was required only if you wanted to use the Fluke documenting process calibrator. | DE109864 |
Data Loaders
| Description | Tracking ID |
|---|---|
| Previously, in a cloud environment, when you tried to load a .zip file containing .csv files using the Data Loader interface, the load intermittently failed with the message access denied. Now, the files load without errors. | DE109151 |
Failure Modes and Effects Analysis (FMEA)
| Description | Tracking ID |
|---|---|
| Previously, the user experienced database errors when using FMEA data loaders under certain conditions. This issue has been resolved. Now, the incremental save feature has been added to these data loaders. | DE109688 |
Family Policies
| Description | Tracking ID |
|---|---|
| The messages written in the server logs by the Policy Execution Service and Policy Trigger Service are now more specific to the logging levels. | US347947 |
| Description | Tracking ID |
|---|---|
Previously, when the job configured to delete the execution history logs ran, the following issues intermittently occurred:
|
|
Inspection Management
| Description | Tracking ID |
|---|---|
| A new Human Resource role, Contract Inspector, is now available. A Contract Inspector can modify the Inspection Document Status field in Inspection records to Pending Approval without being the user defined in the Inspection Report Owner field if they are a Team Member in the associated Inspection record. | US346807 |
| Using the Inspection Management (IM) Assets and Inspection Management (IM) Functional Location data loaders, a Contract Inspector who is a Team Member in the associated Inspection record can now modify the Status field to Pending Approval without being the user defined in the Inspection Report Owner field. | US346807 |
| If you are using Status to manage your Inspection Recommendation records and you are a Team Member in the associated Inspection record, you can now transition the Inspection Recommendation to the Pending Review status without being the user defined in the Author field. | US346807 |
| Previously, the Inspection Lock field was disabled unless you were the Inspection Report Owner. This field is now enabled if you are a Team Member in the associated Inspection record. | US346807 |
Policy Designer
| Description | Tracking ID |
|---|---|
| The messages written in the server logs by the Policy Execution Service and Policy Trigger Service are now more specific to the logging levels. | US347947 |
| Description | Tracking ID |
|---|---|
Previously, if you copied and renamed an Input node of the policy model, and then saved the policy, the following issues occurred until you reloaded the policy:
| DE109329 |
Previously, when the job configured to delete the execution history logs ran, the following issues intermittently occurred:
|
|
Risk Based Inspection (RBI) 580
| Description | Tracking ID |
|---|---|
| Previously, in the Criticality Consequence Evaluation datasheet, two required fields for Heat Exchanger Bundles, Flammable Leak Type and Toxic Leak Type, did not have the Not Applicable (N/A) option in their respective drop-down list boxes. This issue has been resolved. Additionally, the following validation changes have been made:
| DE109171 |
RBI 581
| Description | Tracking ID |
|---|---|
| Previously, you could not create a Quantitative (581) analysis if the logged in user culture was Russian. This issue has been resolved. | DE109168 |
Reliability Analytics
| Description | Tracking ID |
|---|---|
| Previously, in the Failure Probability workspace, if you selected Future Probability and then entered a value in the Set Future Probability window, the value in the Future Failure Probability column was not correctly updated. This issue has been resolved. | DE109848 |
Reliability Centered Maintenance (RCM)
| Description | Tracking ID |
|---|---|
| Previously, the apply template builder took a long time to load when the template was complex. This issue has been resolved. Now, when creating an analysis from a template, the Apply Template Builder window loads more quickly. | DE109690 |
| Previously, the user experienced database errors when using RCM data loaders under certain conditions. This issue has been resolved. Now, the incremental save feature has been added to these data loaders. | DE109688 |
Root Cause Analysis
| Description | Tracking ID |
|---|---|
| Previously, when you created an RCA for a Production Event from the Production Loss Analysis (PLA) module, in the Analysis Summary workspace, in the Linked Assets section, the Causing Asset associated with the Production Event did not appear in the Record ID column. This issue has been resolved. | DE109585 |
Rounds Designer
| Description | Tracking ID |
|---|---|
| Previously, when creating a Checkpoint condition, you could not enter a value in the Select Value box when an allowable value was not defined. This issue has been resolved. | DE108709 |
Rules
| Description | Tracking ID |
|---|---|
| You can now compile only the family rules that you added or modified, instead of compiling all the family rules in a rules library project. To facilitate this enhancement, the data source ID is now used instead of GUID. This enhancement also resolves possible errors when compiling rules with references to other rule projects. Note: You must compile all the family rules only if you modify the data source ID. | US352396 |
V4.3.0.7.3
This topic provides a list of product changes included in this patch.
Asset Strategy Management
| Description | Tracking ID |
|---|---|
| Previously, in the Risks and Actions page, if you attempted to consolidate RCM or FMEA actions, the process timed out. | DE108490 |
Calibration Management
| Description | Tracking ID |
|---|---|
| Previously, in a calibrator, if you entered the name of a user who was not a member of the MI Calibration Administrator or MI Calibration User Security Group, and tried to receive data from a calibrator, although you received the data, instead of an error message, a blank screen appeared. This issue has been resolved. | DE108620 |
| Previously, after receiving multiple records from a calibrator, if you did not save all the records that were received, the values for the saved records were always picked from the first record in the list. This issue has been resolved. | DE108612 |
| Previously, if you sent data to a Fluke calibrator, and performed a calibration using a Calibration Template, Analog or Calibration Template, Discrete record with the input UOM set to Degrees Celsius (DEG C), an error occurred. This issue has been resolved. | DE108500 |
Rounds Data Collection
| Description | Tracking ID |
|---|---|
| Previously, while disconnected from a network, if you created a recommendation for a Route, the time stamp of the recommendation displayed the time at which your device reconnected to a network, not the time at which the recommendation was created. | DE108482 |
| Previously, if you created an Operator Rounds Recommendation record without the Create Work Request? check box selected, and then selected that check box later when updating the recommendation, the work request was entered into your SAP system, but the recommendation was not updated with the data of the work request. | DE108362 |
Rounds Designer
| Description | Tracking ID |
|---|---|
| Previously, if you created a Route using the Rounds Route Data Loader, the Route sequence did not load as expected. | DE108351 |
V4.3.0.7.2
This topic provides a list of product changes included in this patch.
Asset Health Manager
| Description | Tracking ID |
|---|---|
| Previously, because time stamp values for health indicator readings were truncated, health indicator readings were sometimes duplicated, and sometimes health indicators erroneously appeared to be out of sync. This issue has been resolved. | DE106890 |
Previously, in the Health Summary page, sometimes a No Status icon ( ) erroneously appeared next to health indicators that had a valid status. This issue has been resolved. | DE106606 |
| Previously, if you specified that you wanted to store zero readings in the GE Digital APM database, the PDI service stored a reading and then deleted it, which caused performance degradation. This issue has been resolved. Now, the PDI service no longer adds and deletes extraneous readings, and, as a result, database performance is significantly improved. | DE107755 |
Asset Hierarchy
| Description | Tracking ID |
|---|---|
| Previously, in the Group section of the Asset Finder window, when you attempted to add a group of assets, an error occurred. This issue has been resolved. | DE107347 |
Catalog
| Description | Tracking ID |
|---|---|
| Previously, after you upgraded an Oracle data source, certain custom folders did not appear in the catalog under . This issue has been resolved. | DE106796 |
Family Policies
| Description | Tracking ID |
|---|---|
Previously, in the Properties window for a Math node, when you specified the names of some variables, an error message appeared in the notification bar, indicating a conflict between variable names, even when there was no apparent conflict in the specified names. This issue occurred when two variable names contained the same string and one of them contained an underscore or numeric value after the string. This issue has been resolved. Now, in these scenarios, the following events occur:
| DE107317 |
| Previously, in the Properties window for a Create Entity node, in the Value box, if you specified a value which is same as the default value of the corresponding field, the execution of the policy failed, and an error message appeared in the Node Execution Details window for the node, indicating that the index size is incorrect. This issue has been resolved. | DE106599 |
Graphs
| Description | Tracking ID |
|---|---|
| Previously, hyperlinks in a heat map did not work as expected. This issue has been resolved. | DE106778 |
Policy Designer
| Description | Tracking ID |
|---|---|
| Previously, when you started the Policy Execution Service or Policy Trigger Service, if the Microsoft Message Queuing (MSMQ) stopped responding or could not be accessed, the service failed to start. This issue has been resolved. | US341549 |
Previously, in the Properties window for a Math node, when you specified the names of some variables, an error message appeared in the notification bar, indicating a conflict between variable names, even when there was no apparent conflict in the specified names. This issue occurred when two variable names contained the same string and one of them contained an underscore or numeric value after the string. This issue has been resolved. Now, in these scenarios, the following events occur:
| DE107317 |
| Previously, in the Properties window for a Create Entity node, in the Value box, if you specified a value which is same as the default value of the corresponding field, the execution of the policy failed, and an error message appeared in the Node Execution Details window for the node, indicating that the index size is incorrect. This issue has been resolved. | DE106599 |
Reliability Analytics
| Description | Tracking ID |
|---|---|
| Previously, when running a simulation on a complex analysis with a large number of buffer components in System Reliability, the simulation did not complete. | DE106782 |
Rounds Data Collection
| Description | Tracking ID |
|---|---|
| Previously, when attempting to create an Operator Rounds Recommendation, if you selected the Create EAM Work Request? check box prior to saving the Recommendation, an error occurred, and the Recommendation record would not be created. | DE105520 |
Rounds Designer
| Description | Tracking ID |
|---|---|
| Previously, if you attempted to use a data loader to add a checkpoint to a Route, the sequence of existing checkpoints on the Route was unintentionally modified. | DE106752 |
| Previously, loading a small number of records using the Rounds Routes Data Loader would occasionally result in timeout errors. | DE106749 |
| Previously, if you attempted to move a checkpoint node by dragging and dropping it into a heading, an error occurred. | DE106403 |
Schedule Logs
| Description | Tracking ID |
|---|---|
Previously, a policy was not executed as per schedule until you updated the policy, if the following changes had been made to the GE Digital APM database that contained the policy:
| DE102150 |
Thickness Monitoring
| Description | Tracking ID |
|---|---|
Previously, if you used the TM Equipment or TM Functional Location data loaders to load data that consisted only of measurements, the Analysis Required check box in the TML Corrosion Analysis datasheet was not selected, and the Calculate button ( ) did not turn orange. If you tried to calculate the analysis, the newly loaded measurements were not included in the calculation. This issue has been resolved. Now, when you load measurements, the Analysis Required check box is selected, and the Calculate button () turns orange, indicating the analysis is ready to be calculated. When you calculate the analysis, the newly loaded measurements are included in the calculation. Also, the affected assets are available in the Assets Requiring a Calculation section of the Thickness Monitoring Overview page, ready for bulk calculation. | DE106600 |