Open topic with navigation

Receive Data from a Datalogger

Before You Begin

• Install the on the machine that you will use with dataloggers. If you do not install it, when you attempt to send or receive data, you will be prompted to install it.

Steps

1. Access the TM Dataloggers page.

2. At the top of the page, in the drop-down list box, select the datalogger from which you want to receive data. By default, the datalogger that you previously used is selected.

3. Ensure that the datalogger settings are correct.

4. Select the Receive From tab.

   The Receive From section appears.

   

5. Select Receive.

   The Select Files to Receive window appears, displaying a list of files that store the measurement data. By default, the check boxes corresponding to all the files are selected.

   

6. If you do not want to receive the data stored in a file, clear the check box.

7. Select Done.

   The data is received from the datalogger, and stored in Thickness Measurement records.

   Note: If readings are not taken for a measurement, however, Measurement Not Taken records are not created.

Results

• The following analyses are recalculated:
  • TML Corrosion Analysis linked to each TML whose measurement data you have received.
  • Asset Corrosion Analysis linked to each asset whose measurement data you have received.

Copyright © 2018 General Electric Company. All rights reserved.