Offline Inspection Families

The following baseline Inspection families are available in Inspection Field Data Collection:

Family Caption	Related Families Enabled for Offline Forms	Offline Form Caption
API 510 External Checklist	None	API 510 External Checklist Offline Form
API 510 Internal Checklist	None	API 510 Internal Checklist Offline Form
API 510 Internal Exchanger Checklist	None	API 510 Internal Exchanger Checklist Offline Form
API 570 External Checklist	None	API 570 External Checklist Offline Form
API 653 External Checklist	None	API 653 External Checklist Offline Form
API 653 Internal Checklist	None	API 653 Internal Checklist Offline Form
Bundle Sub-Inspection	None	Bundle Sub-Inspection Offline Form
Checklist Finding	None	Checklist Finding Offline Form
External PRD Checklist	None	External PRD Checklist Offline Form
Full Inspection	Bundle Sub-Inspection, Pressure Test Sub-Inspection, General Finding	Full Inspection Offline Form
General Finding	None	General Finding Offline Form
General Inspection	Pressure Test Sub-Inspection, General Finding	General Inspection Offline Form
Inspection Recommendation	None	Inspection Recommendation
PRD Pop Test Checklist	None	PRD Pop Test Checklist Offline Form
Pressure Test Sub Inspection	None	Pressure Test Sub-Inspection Offline Form

Field Behavior for Offline Inspections

In order for any field to work in offline forms, baseline behaviors are defined for required fields.

IMPORTANT: If you have customized any of the following behaviors in previous versions of GE Digital APM, then your customizations will be overwritten with the offline baseline behaviors listed below.

Offline Family	Field Caption	Field Behavior	Resulting Offline Behavior
Bundle Inspection	Action This Inspection	Default Value	The literal value NO ACTION.
	Action This Inspection	Valid Value	Populated by the MI BUNDLE ACTION System Code and Table.
	Bundle Type	Valid Value	Populated by the MI BUNDLE TYPE System Code and Table.
	Total Number of Tubes in Bundle	Default Value	The literal value 0.
	Tubes Plugged During This Inspection	Default Value	The literal value 0.
	Tubes (Plugged At Start) Replaced	Default Value	The literal value 0.
	Tubes Plugged at Inspection Start	Default Value	The literal value 0.
	Tubes (Not Previously Plugged) Replaced	Default Value	The literal value 0.
Checklist Finding	Action Taken Code	Default Value	The literal value NONE.
	Action Taken Code	Valid Value	Populated by the FROM MI ACTION System Code and Table where the value in the MI INSPECTION REFERENCES field equals INSPECTION FINDING ACTION.
	Deterioration Mechanism	Valid Value	Populated by the MI DAMAGE MECHANISM System Code and Table.
	Deterioration Mode	Valid Value	Populated by the MI DAMAGE MODE System Code and Table.
	Type	Default Value	The literal value OBSERVATION.
	Type	Valid Value	Populated by the MI FINDING TYPE System Code and Table.
Inspection	Asset ID	Disable Value	Always disabled.
	Equipment Operating State	Valid Value	Populated by the FROM MI EQUIP OP STATE System Code and Table where the value in the MI INSPECTION REFERENCES field equals INSPECTION EQUIPMENT STATE.
	Functional Location ID	Disable Value	Always disabled.
Inspection Recommendation	Asset ID	Disable Value	Always disabled.
	Functional Location ID	Disable Value	Always disabled.
	Recommendation ID	Disable Value	Always disabled.
	Target Completion Date	Required	Always required.
PRD Pop Test Checklist	As Found Pop Pressure	Validation	Greater than or equal to 0.
	As Left Pop Pressure	Validation	Greater than or equal to 0.
	Design Set Pressure	Validation	Greater than or equal to 0.
	Leak Category	Valid Value	Populated by the MI INSPECTION LEAK CATEGORY System Code and Table.
	Leak Test Results	Valid Value	Populated by the FROM MI INSPECTION RESULT System Code and Table where the value in the MI RBI REFERENCES field equals MI INSP RESULTS LEAK.
	Over Pressure Test Results	Valid Value	Populated by the FROM MI INSPECTION RESULT where the value in the MI RBI REFERENCES field equals MI INSP RESULTS OVER PRESSURE.
	Test Media (Shell)	Valid Value	Populated by the MI TEST MEDIA System Code and Table.
	Test Media (Tube)	Valid Value	Populated by the MI TEST MEDIA System Code and Table.