Open topic with navigation

Modify a Failure Effect

Before You Begin

This topic assumes that you have a pre-established FMEA analysis with Failure Modes.

Steps

1. Access the failure mode for which you want to modify a failure effect.

2. In the left pane, select the failure effect that you want to access.

   The datasheet for the selected failure effect appears in the workspace. The workspace also contains the following tabs:

   • Risk: Contains the risk associated with the selected failure effect.

   • Decision Logic: Contains a series of questions that will provide you a recommended action based on your responses.

     

3. As needed, modify the values in the available fields.

4. Select .

   The modifications to the failure effect are saved.

Copyright © 2018 General Electric Company. All rights reserved.