About the Risk Based Inspection (RBI) 580 Data Loader Workbook Layout and Use

Worksheet	Description
Assets	This worksheet is used to specify existing Equipment records to which components will be linked.
RBI_Components	This worksheet is used to specify the following types of RBI Component records that will be updated or created and linked to assets. Cylindrical Shell Exchanger Header Exchanger Tube Piping Pump Compressor Casing Tank Bottom
RBI_Criticality_Analysis	This worksheet is used to define RBI Criticality Analysis records that will be linked to components.
Consequence_Evaluation	This worksheet is used to define Consequence Evaluation records that will be linked to analyses.
DME_Environmental_Cracking	This worksheet is used to define Criticality Env. Crack. Deg. Mech. Eval. records and Degradation Mechanisms that will be linked to analyses.
DME_External_Corrosion	This worksheet is used to define Criticality Ext. Corr. Deg. Mech. Eval. records and Degradation Mechanisms that will be linked to analyses.
DME_Internal_Corrosion	This worksheet is used to define Criticality Int. Corr. Deg. Mech. Eval. records and Degradation Mechanisms that will be linked to analyses.
DME_Other	This worksheet is used to define Criticality Other Damage Mech. Eval. records and Degradation Mechanisms that will be linked to analyses.
DME_Custom	This worksheet is used to define custom Criticality Other Damage Mech. Eval. records and Degradation Mechanisms that will be linked to analyses.
Degradation_Mechanism	This worksheet is used to define or update Damage Mechanisms that are or will be linked to the specified analyses.
(PickList)	This worksheet details the valid values available for fields that have pick lists. The field values listed in the (PickList) worksheet have been detailed in the corresponding worksheet. When you load data using the data loader, the data on this worksheet is not loaded.

Color	Description	Comments
	Required Key Fields	Indicates columns that contain values that are used by the Risk Based Inspection (RBI) 580 Data Loader to look up and create records. If these columns are removed from the worksheets, the data load will fail. While the worksheets require that these columns be present, values are not necessarily required in these columns.
	Fields Required for Calculation	Indicates columns that contain values that are required to perform calculations in Risk Based Inspection. Some cells only require values in certain cases. Such cases are found in parentheses in the first row of each worksheet.
	Recommended Fields	Indicates columns that, according to GE Digital Best Practice for Risk Based Inspection, should contain values.
	Custom Fields	Indicates columns where you can specify custom fields.

On the Assets worksheet, you will specify assets to which you want to link components. The columns that appear on this worksheet also appear on every subsequent worksheet, and are used to identify the records that will be linked, directly or indirectly, to the assets.

Note: Each row in this worksheet represents a unique asset. You should not include the same asset more than once.

Field Caption	Field ID	Data Type (Length)	Comments
Equipment ID	MI_EQUIP000_EQUIP_ID_C	Character (255)	This column requires at least one cell to have a value.
CMMS System	MI_EQUIP000_SAP_SYSTEM_C	Character (255)	If the Equipment record for an asset has a value in the CMMS System field, that value is required in this cell.
Equipment Technical Number	MI_EQUIP000_EQUIP_TECH_NBR_C	Character (255)	If you are required to enter a value for the CMMS System cell for an asset, and the Equipment record for the asset has a value in the Equipment Technical Number field, that value is required in this cell. If there is no value in the CMMS System field, this cell can be blank, even if the Equipment record contains a value for the Equipment Technical Number field.

Field Caption

Field ID

Data Type (Length)

Comments

Equipment ID

MI_EQUIP000_EQUIP_ID_C

Character (255)

This column requires at least one cell to have a value.

CMMS System

MI_EQUIP000_SAP_SYSTEM_C

Character (255)

If the Equipment record for an asset has a value in the CMMS System field, that value is required in this cell.

Equipment Technical Number

MI_EQUIP000_EQUIP_TECH_NBR_C

Character (255)

If you are required to enter a value for the CMMS System cell for an asset, and the Equipment record for the asset has a value in the Equipment Technical Number field, that value is required in this cell.

If there is no value in the CMMS System field, this cell can be blank, even if the Equipment record contains a value for the Equipment Technical Number field.

On the RBI Components worksheet, you will specify the Criticality RBI Component records that you want to create or update.

Note: Each row represents a unique component, though multiple components may be related to the same asset.

Field Caption	Field ID	Data Type (Length)	Comments
Equipment ID	MI_EQUIP000_EQUIP_ID_C	Character (255)	Values in this column must match values entered on the Assets worksheet. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
CMMS System	MI_EQUIP000_SAP_SYSTEM_C	Character (255)	Values in this column must match values entered on the Assets worksheet, if they exist. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
Equipment Technical Number	MI_EQUIP000_EQUIP_TECH_NBR_C	Character (255)	Values in this column must match values entered on the Assets worksheet, if they exist. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
Component	MI_RBICOMPO_COMPO_C	Character (250)	A value is required.
Component Type	MI_RBICOMPO_COMPO_TYPE_C	Character (60)	A value is required. In the baseline GE Digital APM system, this cell may only contain one of the following values: 1" Pipe 1.25" Pipe 1.5" Pipe 1/2" Pipe 10" Pipe 102" Pipe 12" Pipe 14" Pipe 16" Pipe 18" Pipe 2" Pipe 2.5" Pipe 20" Pipe 24" Pipe 26" Pipe 28" Pipe 3" Pipe 3/4" Pipe 30" Pipe 32" Pipe 34" Pipe 36" Pipe 4" Pipe 40" Pipe 42" Pipe 48" Pipe 5" Pipe 54" Pipe 56" Pipe 6" Pipe 60" Pipe 8" Pipe 90" Pipe Air Cooled Exchanger-Header Air Cooled Exchanger-Tbs Balanced Bellows PRD Column-Bottom Column-Middle Column-Top Compressor Filter Fin/Fan Cooler Heat Exchanger-Bundle Heat Exchanger-Channel Heat Exchanger-Shell Pressure Vessel Reactor Storage Tank Storage Tank Bottom
Component Family	FAMILY_ID		In the baseline GE Digital APM system, this cell may only contain one of the following values: Criticality RBI Component - Cylindrical Shell Criticality RBI Component - Exchanger Bundle Criticality RBI Component - Exchanger Header Criticality RBI Component - Exchanger Tube Criticality RBI Component - Piping Criticality RBI Component - Tank Bottom
Component Description	MI_RBICOMPO_COMPO_DESCR_C	Character (255)	A value is required if the value in the Toxic Mixture cell is True.
Component Date in Service	MI_RBICOMPO_COMP_STRT_DATE_DT	Date	A value is required if a Criticality Ext. Corr. Deg. Mech. Eval., Criticality Int. Corr. Deg. Mech. Eval., or Criticality Env. Crack. Deg. Mech. Eval. record will be created for an analysis linked to this component.
Circuit From	MI_CCRBICPI_CIRCU_FROM_C	Character (250)	None
Circuit To	MI_CCRBICPI_CIRCU_TO_C	Character (250)	None
Component Comments	MI_RBICOMPO_COMPO_COMME_TX	Text	None
Operating Pressure	MI_RBICOMPO_OPERA_PRESS_N	Numeric	A value is required. The value in this cell is copied to the Operating Pressure field of the associated RBI Analysis. The value in this cell must be less than or equal to the value in the Design Pressure cell for the analysis to be created.
Operating Pressure - Shell	MI_CCRBICEB_OPER_PRES_SHEL_N	Numeric	A value is required.
Operating Temperature	MI_RBICOMPO_OPERA_TEMPE_N	Numeric	A value is required. The value in this cell is copied to the Operating Temperature field of the associated RBI Analysis. The value in this cell must be less than or equal to the value in the Design Temperature cell for the analysis to be created.
Operating Temperature - Shell	MI_CCRBICEB_OP_TEMP_SHEL_N	Numeric	None
Area Humidity	MI_CCRBICOM_AREA_HUMID_C	Character (100)	A value is required if a Criticality Ext. Corr. Deg. Mech. Eval. record will be created for an analysis linked to this component. In the baseline GE Digital APM system, this cell may only contain one of the following values: Low Medium High If the family has been customized, the valid values could be different. This cell may only contain a value that exists in the list in the Area Humidity field for Criticality RBI Component records.
Foundation Type	MI_CCRBICTB_FOUND_TYPE_C	Character (50)	A value is required for RBI Storage Tank Bottom Components. This cell may only contain one of the following values: Clay Silt Sand Gravel Concrete Double Floor The list in this field is populated by the FOUNDATION TYPES System Code Table. If the system code table has been customized, the valid values could be different. To verify which options are acceptable in your GE Digital APM system, via Configuration Manager, refer to the appropriate table.
Initial Fluid Phase	MI_RBICOMPO_INIT_FLU_PHASE_C	Character (20)	A value is required for each row. In the baseline GE Digital APM system, this cell may only contain one of the following System Code IDs: Liquid Gas The list in this field is populated by the FLUID TYPES System Code Table. If the system code table has been customized, the valid values could be different. To verify which options are acceptable in your GE Digital APM system, via Configuration Manager, refer to the appropriate table.
Initial Fluid Phase - Shell Side	MI_CCRBICEB_INI_FD_PHS_SH_SD_C	Character (20)	A value is required for each row. In the baseline GE Digital APM system, this cell may only contain one of the following System Code IDs: Liquid Gas The list in this field is populated by the FLUID TYPES System Code Table. If the system code table has been customized, the valid values could be different. To verify which options are acceptable in your GE Digital APM system, via Configuration Manager, refer to the appropriate table. This field is only required for Exchanger Bundle RBI Components.
Process Fluid	MI_RBICOMPO_PROCE_FLUID_C	Character (50)	A value is required. In the baseline GE Digital APM system, this cell may only contain one of the following values: 15% H2 2-Methoxyethanol Acetic Acid Acetic Anhydride Acetone Acetonitrile Acid ACR (Acrolein) AIR ALCL3 Amine AN (Acrylonitrile) Asphalt Benzine BF3 C1 C10 (Kerosene) C11 C12 C13-16 (Diesel) C17-25 (Gas Oil) C2 C25+ (Resid) C3 C4 C5 C6 C7 C8 (Gasoline) C9 Calcium Acetate Calcium Chloride Caustic (20%) CCL4 Chlorine CO CO2 Crude DEE Diesel DMDS (Di-methyl disulfide) DMF (Dimethyl Floride) DMS (Dimethyl Sulfide) EDA (Ethylenediamine) EE EEA EG Eliminox EO ETOH (Ethanol) Freon 22 Fuel Oil Furfural Gasoline Glycol H2 H2O (Water) H2S H2SO4 HCHO HCl HCN HF Hydrazine Hydroquinone IPAC (Isopropyl Alcohol) Kerosene Ketene KOH MDEA ME MEK (Methyl Ethyl Keytone) MEO (Methyl Ethyl Oleate) MEOH (Methanol) Methanol Brine Methyl Mercaptan Methylene Chloride MTBE N2 Na2SO3 NAOH Naptha NH3 Nitric Acid NO2 Oleum Perchloroethylene Perchloromethylmercaptan Peroxide Petroleum Gases Phosgene PO Propanol Propionitrile Propylene Oxide Pyrophoric Steam Styrene (Aromatic) Sulfur Sulfur Dioxide Sulfur Trioxide TBA (Tert-Butyl Alcohol) TDI Toluene TSP (Trisodium Phosphate) VAM Xylene
Process Fluid - Shell Side	MI_CCRBICEB_PROC_FD_SH_SD_C	Character (50)	A value is required. In the baseline GE Digital APM system, this cell may only contain one of the following values: 15% H2 2-Methoxyethanol Acetic Acid Acetic Anhydride Acetone Acetonitrile Acid ACR (Acrolein) AIR ALCL3 Amine AN (Acrylonitrile) Asphalt Benzine BF3 C1 C10 (Kerosene) C11 C12 C13-16 (Diesel) C17-25 (Gas Oil) C2 C25+ (Resid) C3 C4 C5 C6 C7 C8 (Gasoline) C9 Calcium Acetate Calcium Chloride Caustic (20%) CCL4 Chlorine CO CO2 Crude DEE Diesel DMDS (Di-methyl disulfide) DMF (Dimethyl Floride) DMS (Dimethyl Sulfide) EDA (Ethylenediamine) EE EEA EG Eliminox EO ETOH (Ethanol) Freon 22 Fuel Oil Furfural Gasoline Glycol H2 H2O (Water) H2S H2SO4 HCHO HCl HCN HF Hydrazine Hydroquinone IPAC (Isopropyl Alcohol) Kerosene Ketene KOH MDEA ME MEK (Methyl Ethyl Keytone) MEO (Methyl Ethyl Oleate) MEOH (Methanol) Methanol Brine Methyl Mercaptan Methylene Chloride MTBE N2 Na2SO3 NAOH Naptha NH3 Nitric Acid NO2 Oleum Perchloroethylene Perchloromethylmercaptan Peroxide Petroleum Gases Phosgene PO Propanol Propionitrile Propylene Oxide Pyrophoric Steam Styrene (Aromatic) Sulfur Sulfur Dioxide Sulfur Trioxide TBA (Tert-Butyl Alcohol) TDI Toluene TSP (Trisodium Phosphate) VAM Xylene
Toxic Mixture	MI_RBICOMPO_TOXIC_MIX_F	Boolean	Enter True or False. A value is required if the value in the Toxic Mixture cell is True.
Toxic Fluid	MI_RBICOMPO_TOXIC_MODEL_C	Character (50)	A value is required if the value in the Toxic Mixture cell is True. In the baseline GE Digital APM system, this cell may only contain one of the following values: ACR (Acrolein) ALCL3 AN (Acrylonitrile) BF3 Chlorine CO EE EO H2S HCHO HCl HCN HF Hydrazine Methyl Mercaptan NH3 Nitric Acid NO2 Perchloromethylmercaptan Phosgene Propionitrile Propylene Oxide Sulfur Trioxide TDI VAM
Percent Toxic	MI_RBICOMPO_PERCE_TOXIC_N	Numeric	A value is required if the value in the Toxic Mixture cell is True.
Toxic Mixture - Shell Side	MI_CCRBICEB_TOX_MX_SH_SD_C	Boolean	Enter True or False. A value is required if the value in the Toxic Mixture - Shell cell is True.
Toxic Fluid - Shell Side	MI_CCRBICEB_TOX_FLD_SH_SD_C	Character (50)	A value is required if the value in the Toxic Mixture - Shell Side cell is True. In the baseline GE Digital APM system, this cell may only contain one of the following values: ACR (Acrolein) ALCL3 AN (Acrylonitrile) BF3 Chlorine CO EE EO H2S HCHO HCl HCN HF Hydrazine Methyl Mercaptan NH3 Nitric Acid NO2 Perchloromethylmercaptan Phosgene Propionitrile Propylene Oxide Sulfur Trioxide TDI VAM
Percent Toxic - Shell Side	MI_CCRBICEB_PER_TOX_SHEL_SD_N	Numeric	A value is required if the value in the Toxic Mixture - Shell Side cell is True.
Inventory	MI_RBICOMPO_INVEN_N	Numeric	A value is required if: The Component Type is Storage Tank. -and- The value in the Use Calculated Inventory cell in the corresponding row on the Consequence_Evaluation worksheet is blank or False.
Detection Time	MI_CCRBICOM_DETEC_TIME_N	Numeric	A value is required.
Isolation Time	MI_CCRBICOM_ISOLA_TIME_N	Numeric	A value is required.
Design Pressure	MI_RBICOMPO_DESIG_PRESS_N	Numeric	A value is required for External Damage DMs, AST DMs, or Thinning and Lining DMs. The value in this cell is copied to the Design Pressure field of the associated RBI Analysis. The value in this cell must be greater than or equal to the value in the Operating Pressure cell for the analysis to be created.
Design Pressure - Shell Side	MI_CCRBICEB_DES_PRES_SHEL_SD_N	Numeric	A value is required for a component of type Exchanger Bundle.
Design Temperature	MI_RBICOMPO_DESIG_TEMPE_N	Numeric	A value is required for External Damage DMs, AST DMs, and Thinning and Lining DMs. The value in this cell is copied to the Design Temperature field of the associated RBI Analysis. The value in this cell must be greater than or equal to the value in the Operating Temperature cell for the analysis to be created.
Design Temperature - Shell Side	MI_CCRBICEB_DES_TEMP_SH_SD_N	Numeric	A value is required for a component of type Exchanger Bundle.
Diameter	MI_RBICOMPO_DIAME_INNER_N	Numeric	A value is required if the Component Type is Storage Tank.
Length	MI_RBICOMPO_LENGT_N	Numeric	A value is required in order to populate the Calculated Inventory field.
Fill Height	MI_CCRBICTB_FILL_HEIGH_N	Numeric	A value is required if the Component Type is Storage Tank.
Nominal Thickness	MI_RBICOMPO_NOMIN_THICK_N	Numeric	A value is required for External Damage DMs, AST DMs, and Thinning and Lining DMs.
Stress Lookup Table	MI_RBICOMPO_STRESS_TABLE_C	Character (50)	A value is required for External Damage DMs, AST DMs, Thinning and Lining DMs, and Brittle Fracture DMs. This cell may only contain one of the following values: Pressure Vessels Tanks Piping If the family has been customized, the valid values could be different. This cell may only contain a value that exists in the list in the Stress Lookup Table field for Criticality RBI Component records.
BM CODE	MI_RBICOMPO_BM_CODE_C	Character (30)	A value is required for External Damage DMs, AST DMs, Thinning and Lining DMs, and Brittle Fracture DMs. Refer to the (Picklist) worksheet in the excel workbook for valid values that you enter in this cell.
BM YEAR	MI_RBICOMPO_BM_YEAR_C	Character (50)	A value is required for External Damage DMs, AST DMs, Thinning and Lining DMs, and Brittle Fracture DMs. Refer to the (Picklist) worksheet in the excel workbook for valid values that you enter in this cell.
BM SPEC	MI_RBICOMPO_BM_SPEC_C	Character (50)	A value is required for External Damage DMs, AST DMs, Thinning and Lining DMs, and Brittle Fracture DMs. Refer to the (Picklist) worksheet in the excel workbook for valid values that you enter in this cell.
BM GRADE	MI_RBICOMPO_BM_GRADE_C	Character (50)	A value is required for External Damage DMs, AST DMs, Thinning and Lining DMs, and Brittle Fracture DMs. Refer to the (Picklist) worksheet in the excel workbook for valid values that you enter in this cell.
Weld Joint Effy	MI_RBICOMPO_WELD_JOINT_EFFY_N	Numeric	A value is required for External Damage DMs, AST DMs, and Thinning and Lining DMs. In the baseline GE Digital APM system, this cell may only contain one of the following values: 0.35 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 0.95 1.0 If the family has been customized, the valid values could be different. This cell may only contain a value that exists in the list in theWeld Joint Effyfield for Criticality RBI Component records.
Insulated?	MI_RBICOMPO_INSUL_F	Boolean	Enter True or False.
Insulation Type	MI_RBICOMPO_INSUL_C	Character (200)	A value is required if the value in the Insulated? cell is True. In the baseline GE Digital APM system, this cell may only contain one of the following values: Asbestos Calcium Silicate (Cl Free) Calcium Silicate (Not Cl Free) Foam/Cellular Glass Mineral Wool/Fiber Glass Pearlite Unknown
Piping Circuit Length	MI_CCRBICPI_PIP_CIR_LENG_N	Numeric	A value is required in order to populate the Calculated Inventory field. This field is only required for RBI Pipeline Components.
PWHT	MI_CRENCDME_PWHT_F	Boolean	Enter True or False.
Course Number	MI_CCRBICTB_COURS_NUM_N	Numeric	None
Is Entry Possible?	MI_CRENCDME_IS_ENTRY_POSS_C	Character (50)	A value is required. In the baseline GE Digital APM system, this cell may only contain one of the following values: Y N The list in this field is populated by the MI_YES_NO System Code Table. If the system code table has been customized, the valid values could be different. To verify which options are acceptable in your GE Digital APM system, via Configuration Manager, refer to the appropriate table.
Corrosive Product	MI_CCRBICOM_CORRO_PRODU_C	Character (250)	None
Internal Corrosion Type	MI_RBICOMPO_INTER_CORR_TYPE_C	Character (50)	While not required, it is recommended you enter a value in this cell. This field is used when generating RBI Recommendations. In the baseline GE Digital APM system, this cell may only contain one of the following values: Localized Pitting General If the family has been customized, the valid values could be different. This cell may only contain a value that exists in the list in the Internal Corrosion Type field for Criticality RBI Component records.
Internal Corrosion Type - Shell Side	MI_CCRBICEB_INT_COR_TP_SH_SD_C	Character (50)	This field is used when generating RBI Recommendations. In the baseline GE Digital APM system, this cell may only contain one of the following values: Localized Pitting General If the family has been customized, the valid values could be different. This cell may only contain a value that exists in the list in the Internal Corrosion Type field for Criticality RBI Component records.
Predictable Int. Corr. Location	MI_CCRBICOM_PRED_INT_COR_LOC_F	Boolean	Enter True or False.
Pred_Int_Corr_Location - Shell Side	MI_CCRBICEB_PRD_INT_CR_LC_SH_F	Boolean	Enter True or False.
Estimated Internal Corrosion Rate	MI_RBICOMPO_EXP_INT_CORR_RT_N	Numeric	A value is required in this cell if a Criticality Int. Corr. Deg. Mech. Eval. record will be created for an analysis linked to this component.
Estimated External Corrosion Rate	MI_RBICOMPO_EXP_EXT_CORR_RT_N	Numeric	A value is required in this cell if a Criticality Ext. Corr. Deg. Mech. Eval. record will be created for an analysis linked to this component.
Measured External Corrosion Rate	MI_RBICOMPO_MEAS_EXT_COR_RT_N	Numeric	None
Source of Calculated Corrosion Rates	MI_CCRBICOM_CALCD_CR_SRC_C	Character (50)	In the baseline GE Digital APM system, this cell may only contain one of the following System Code IDs: ASSET COMPONENT MANUAL The list in this field is populated by the MI_RBI_CALC_CORRO_SRC System Code Table. If the system code table has been customized, the valid values could be different. To verify which options are acceptable in your GE Digital APM system, via Configuration Manager, refer to the appropriate table.

On the RBI_Criticality_Analysis worksheet, you will specify RBI Criticality Analysis records that you want to create.

Note: Each row represents a unique analysis, though multiple analyses may be related to the same asset.

Field Caption	Field ID	Data Type (Length)	Comments
Equipment ID	MI_EQUIP000_EQUIP_ID_C	Character (255)	Values in this column must match values entered on the Assets worksheet. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
CMMS System	MI_EQUIP000_SAP_SYSTEM_C	Character (255)	Values in this column must match values entered on the Assets worksheet, if they exist. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
Equipment Technical Number	MI_EQUIP000_EQUIP_TECH_NBR_C	Character (255)	Values in this column must match values entered on the Assets worksheet, if they exist. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
Component	MI_RBICOMPO_COMPO_C	Character (250)	A value is required.
Component Type	MI_RBICOMPO_COMPO_TYPE_C	Character (60)	A value is required. This cell may only contain a value that exists in the list in the Component Type field for Criticality RBI Component records.
Analysis Unique ID	MI_ANALYSIS_ID	N/A	This cell is required, but is only used in the context of the workbook. The Risk Based Inspection (RBI) 580 Data Loader uses the value in this cell to match and link Consequence Evaluations and Degradation Mechanism Evaluations to the analysis.
Scenario ID	MI_CRITANAL_TURNAROUND_ID_C	Character (100)	While not required, it is recommended you enter a value in this cell.
Scenario Reference Date	MI_CRITANAL_TURN_AROUN_DATE_D	Date	While not required, it is recommended you enter a value in this cell.
Allowable Stress Override	MI_CRITANAL_MTL_A_STRESS_OVR_F	Boolean	Enter True or False.
Allowable Stress	MI_CRITANAL_MTL_ALLOW_STRESS_N	Numeric	If the Allowable Stress Override cell is True, a value is required in this cell. Required only for RBI Analysis records that are linked to Criticality Int. Corr. Deg. Mech. Eval. or Criticality Ext. Corr. Deg. Mech. Eval. records.
Override Minimum Required Thickness	MI_CRITANAL_EQ_EST_TCK_OVRDE_F	Boolean	Enter True or False.

On the Consequence_Evaluation worksheet, you will specify Consequence Evaluations that you want to create and link to RBI Criticality Analysis records.

Note: Each row represents a unique Consequence Evaluation. Only one Consequence Evaluation can be linked to an analysis, unless you specify a different Consequence for each Consequence Evaluation.

Field Caption	Field ID	Data Type (Length)	Comments
Equipment ID	MI_EQUIP000_EQUIP_ID_C	Character (255)	Values in this column must match values entered on the Assets worksheet. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
CMMS System	MI_EQUIP000_SAP_SYSTEM_C	Character (255)	Values in this column must match values entered on the Assets worksheet, if they exist. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
Equipment Technical Number	MI_EQUIP000_EQUIP_TECH_NBR_C	Character (255)	Values in this column must match values entered on the Assets worksheet, if they exist. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
Component	MI_RBICOMPO_COMPO_C	Character (250)	A value is required.
Component Type	MI_RBICOMPO_COMPO_TYPE_C	Character (60)	A value is required. This cell may only contain a value that exists in the list in the Component Type field for Criticality RBI Component records.
Analysis Unique ID	MI_ANALYSIS_ID	N/A	The value in this cell must correspond to a value entered in the Analysis Unique ID column on the RBI_Criticality_Analysis worksheet.
Consequence	MI_RCONEVAL_CONS_C	Character (50)	A value is required in this cell if you are creating more than one Consequence Evaluation for the same analysis. If left blank, the Consequence field will be populated with the value RBI.
Comments	MI_RCONEVAL_COMM_TX	Text	None
Inventory Group	MI_RCONEVAL_INV_GRP_C	Character (100)	None
Number of Towers	MI_CRCOEVAL_NUM_OF_TOW_N	Numeric	None
Number of Storage Tanks	MI_CRCOEVAL_NUM_STO_TNKS_N	Numeric	None
Number of Vessels	MI_CRCOEVAL_NUM_OF_VESS_N	Numeric	None
Use Calculated Inventory	MI_CRCOEVAL_USE_CALC_INV_F	Boolean	Enter True or False.
Inspection Interval	MI_CRCOEVAL_INSPE_INTER_N	Numeric	A value is required if the component to which the analysis is linked is a Storage Tank or Tank Bottom.
Consequence Near Ignition Source	MI_CRCOEVAL_CON_NEAR_IGN_SRC_F	Boolean	Enter True or False.
Bottom Thickness	MI_CRCOEVAL_BOT_THK_N	Numeric	None
Diked?	MI_CRCOEVAL_DIKED_F	Boolean	Enter True or False.
Diked Area	MI_CRCOEVAL_DIKED_AREA_N	Numeric	None
Persistent Fluid?	MI_CRCOEVAL_PERS_FLUID_F	Boolean	Enter True or False.
Leak Effect	MI_CRCOEVAL_LEAK_EFFEC_C	Character (50)	A value is required if the component to which the analysis is linked is a Storage Tank or Tank Bottom. In the baseline GE Digital APM system, this cell may only contain one of the following values: Ground Surface Water Ground Water If the family has been customized, the valid values could be different. This cell may only contain a value that exists in the list in the Leak Effect field for Consequence Evaluation records.
Unit Cleanup Cost	MI_CRCOEVAL_UNIT_CLEAN_COST_N	Numeric	None
Underside Corrosion Rate	MI_CRCOEVAL_UNDER_COR_RT_N	Numeric	None
(Flammable) Leak Type	MI_CRCOEVAL_LEAK_TYPE_C	Character (150)	In the baseline GE Digital APM system, this cell may only contain one of the following values: Catastrophic HC->Utility Utility->HC If the family has been customized, the valid values could be different. This cell may only contain a value that exists in the list in the Flammable Leak Type field for Consequence Evaluation records.
Toxic Leak Type	MI_CRCOEVAL_TOX_LK_TYPE_C	Character (50)	In the baseline GE Digital APM system, this cell may only contain one of the following values: Catastrophic Toxic->Utility Toxic->Process Leak->Toxic If the family has been customized, the valid values could be different. This cell may only contain a value that exists in the list in the Toxic Leak Type field for Consequence Evaluation records.
Product Unit Value	MI_CRCOEVAL_PROD_UNIT_VAL_C	Character (150)	None

On the DME_Environmental_Cracking worksheet, you will specify Degradation Mechanisms related to Environmental Cracking that you want to create and link to RBI Criticality Analysis records. For each Degradation Mechanism, a Degradation Mechanism Evaluation is created and linked to the specified analysis. Additionally, a corresponding Potential Degradation Mechanism is created and linked to the specified component.

Note: Each row represents a unique Degradation Mechanism. Only one of each type of Degradation Mechanism can be linked to an analysis. For example, the same analysis could have a Carbonate Cracking Degradation Mechanism and a Caustic Cracking Degradation Mechanism, but not two Carbonate Cracking Degradation Mechanisms.

Field Caption	Field ID	Data Type (Length)	Comments
Equipment ID	MI_EQUIP000_EQUIP_ID_C	Character (255)	Values in this column must match values entered on the Assets worksheet. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
CMMS System	MI_EQUIP000_SAP_SYSTEM_C	Character (255)	Values in this column must match values entered on the Assets worksheet, if they exist. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
Equipment Technical Number	MI_EQUIP000_EQUIP_TECH_NBR_C	Character (255)	Values in this column must match values entered on the Assets worksheet, if they exist. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
Component	MI_RBICOMPO_COMPO_C	Character (250)	A value is required.
Component Type	MI_RBICOMPO_COMPO_TYPE_C	Character (60)	A value is required. This cell may only contain a value that exists in the list in the Component Type field for Criticality RBI Component records.
Analysis Unique ID	MI_ANALYSIS_ID	Character (255)	The value in this cell must correspond to a value entered in the Analysis Unique ID column on the RBI_Criticality_Analysis worksheet.
Damage Mechanism	MI_RBDEMEEV_DAM_MECH_C	Character (50)	The value in this cell must be a Degradation Mechanism that corresponds to a Criticality Env. Crack. Deg. Mech. Eval. record. In the baseline GE Digital APM system, this cell may only contain one of the following values: Amine Cracking (ASCC) Carbonate Cracking Caustic Cracking Chloride Stress Corrosion Cracking (CI SCC) Hydrogen Stress Cracking (HSC)- Hydrofluoric Acid Polythionic Acid SCC (PTA) Sulfide Stress Cracking (SSC) Wet H2S (Blistering, SOHIC, HIC, SSC)
Damage Comments	MI_RBDEMEEV_DAM_COM_T	Text	None
Inspection Date	MI_CRDEMEEV_INSP_DATE_D	Date	None
Number of Inspections	MI_CRDEMEEV_NUM_INSP_N	Numeric	In the baseline GE Digital APM system, this cell may only contain a numeric value between 1 -20.
Inspection Confidence	MI_CRDEMEEV_INSP_CONF_C	Character (50)	A value is required. In the baseline GE Digital APM system, this cell may only contain one of the following values: Low Medium High Very High
Damaged At Last Inspection	MI_CRENCDME_DAM_LST_INS_F	Boolean	Enter True or False.
Env. Cracking Higher Levels	MI_CRENCDME_ENV_CRK_HI_LEV_F	Boolean	Enter True or False.
Initial Potential	MI_RBDEMEEV_ESTIM_C	Character (50)	A value is required. In the baseline GE Digital APM system, this cell may only contain one of the following values: Low Medium High If the family has been customized, the valid values could be different. This cell may only contain a value that exists in the list in the Initial Potential field for Criticality Env. Crack. Deg. Mech. Eval. records.
Cyanides?	MI_RBDEMEEV_CYANI_F	Boolean	Enter True or False.
Free Water	MI_RBDEMEEV_FREE_WATER_N	Numeric	None
H2S Content	MI_RBDEMEEV_H2S_CON_C	Character (50)	None
HIC Resistant Steel	MI_CRENCDME_HIC_RESIS_STE_F	Boolean	Enter True or False.
Stable Scale	MI_CRENCDME_STAB_SCALE_F	Boolean	Enter True or False.
PT or MT Access?	MI_CRENCDME_PT_OR_MT_ACCES_C	Character (50)	While not required, it is recommended you enter a value in this cell. In the baseline GE Digital APM system, this cell may only contain one of the following values: Y N The list in this field is populated by the MI_YES_NO System Code Table. If the system code table has been customized, the valid values could be different. To verify which options are acceptable in your GE Digital APM system, via Configuration Manager, refer to the appropriate table.

On the DME_External_Corrosion worksheet, you will specify Criticality Calculator External Corrosion Degradation Mechanisms that you want to create and link to RBI Criticality Analysis records. For each Degradation Mechanism, a Degradation Mechanism Evaluation is created and linked to the specified analysis. Additionally, a corresponding Potential Degradation Mechanism is created and linked to the specified component.

Note: Each row represents a unique Degradation Mechanism. Only one Criticality Calculator External Corrosion Degradation Mechanism can be linked to an analysis.

Field Caption	Field ID	Data Type (Length)	Comments
Equipment ID	MI_EQUIP000_EQUIP_ID_C	Character (255)	Values in this column must match values entered on the Assets worksheet. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
CMMS System	MI_EQUIP000_SAP_SYSTEM_C	Character (255)	Values in this column must match values entered on the Assets worksheet, if they exist. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
Equipment Technical Number	MI_EQUIP000_EQUIP_TECH_NBR_C	Character (255)	Values in this column must match values entered on the Assets worksheet, if they exist. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
Component	MI_RBICOMPO_COMPO_C	Character (250)	A value is required.
Component Type	MI_RBICOMPO_COMPO_TYPE_C	Character (60)	A value is required. This cell may only contain a value that exists in the list in the Component Type field for Criticality RBI Component records.
Analysis Unique ID	MI_ANALYSIS_ID	Character (255)	The value in this cell must correspond to a value entered in the Analysis Unique ID column on the RBI_Criticality_Analysis worksheet.
Damage Mechanism	MI_RBDEMEEV_DAM_MECH_C	Character (50)	The value in this cell must be Criticality Calculator Internal Corrosion.
Damage Comments	MI_RBDEMEEV_DAM_COM_T	Text	None
Insulation Condition	MI_RBDEMEEV_INSUL_CON_C	Character (50)	In the baseline GE Digital APM system, this cell may only contain one of the following values: Good Fair Poor If the family has been customized, the valid values could be different. This cell may only contain a value that exists in the list in the Coating Quality field for Criticality Ext. Corr. Deg. Mech. Eval records.
Coating Quality	MI_RBDEMEEV_COAT_QUAL_C	Character (50)	A value is required if the value in the Coating Present? cell is Y. In the baseline GE Digital APM system, this cell may only contain one of the following System Code IDs: NONE POOR MEDIUM HIGH The list in this field is populated by the MI_RBI_Coating_Quality System Code Table. If the system code table has been customized, the valid values could be different. To verify which options are acceptable in your GE Digital APM system, via Configuration Manager, refer to the appropriate table.
Selected Corrosion Rate	MI_RBDEMEEV_SEL_CORR_RATE_N	Numeric	A value is required for each row. In the baseline GE Digital APM system, this cell may only contain one of the following System Code IDs: 0 1 3 For this field: 0 corresponds to Estimated Rate. 1 corresponds to Average Rate. 3 corresponds to Calculated Rate. The list in this field is populated by the RBI_INT_COR_TYP System Code Table. If the system code table has been customized, the valid values could be different. To verify which options are acceptable in your GE Digital APM system, via Configuration Manager, refer to the appropriate table.
Measured Corrosion Rate	MI_RBDEMEEV_BM_MEASU_RT_N	Numeric	A value is required if the value in the Selected Corrosion Rate column is 1.
Inspection Date	MI_CRDEMEEV_INSP_DATE_D	Date	None
Number of Inspections	MI_CRDEMEEV_NUM_INSP_N	Numeric	A value is required.
Inspection Confidence	MI_CRDEMEEV_INSP_CONF_C	Character (50)	A value is required. This cell may only contain the ID of a System Code listed in the INSPECTION CONFIDENCE, MI_RBI_REFERENCES, and MI_RBI_INSPCONF System Code Tables. To verify which options are acceptable in your GE Digital APM system, via Configuration Manager, refer to the appropriate table.
Near Cooling Tower?	MI_RBDEMEEV_N_COOL_TOWER_F	Boolean	Enter True or False.

On the DME_Internal_Corrosion worksheet, you will specify Criticality Calculator Internal Corrosion Degradation Mechanisms that you want to create and link to RBI Criticality Analysis records. For each Degradation Mechanism, a Degradation Mechanism Evaluation is created and linked to the specified analysis. Additionally, a corresponding Potential Degradation Mechanism is created and linked to the specified component.

Note: Each row represents a unique Degradation Mechanism. Only one Criticality Calculator Internal Corrosion Degradation Mechanism can be linked to an analysis.

Field Caption	Field ID	Data Type (Length)	Comments
Equipment ID	MI_EQUIP000_EQUIP_ID_C	Character (255)	Values in this column must match values entered on the Assets worksheet. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
CMMS System	MI_EQUIP000_SAP_SYSTEM_C	Character (255)	Values in this column must match values entered on the Assets worksheet, if they exist. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
Equipment Technical Number	MI_EQUIP000_EQUIP_TECH_NBR_C	Character (255)	Values in this column must match values entered on the Assets worksheet, if they exist. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
Component	MI_RBICOMPO_COMPO_C	Character (250)	A value is required.
Component Type	MI_RBICOMPO_COMPO_TYPE_C	Character (60)	A value is required. This cell may only contain a value that exists in the list in the Component Type field for Criticality RBI Component records.
Analysis Unique ID	MI_ANALYSIS_ID	Character (255)	The value in this cell must correspond to a value entered in the Analysis Unique ID column on the RBI_Criticality_Analysis worksheet.
Damage Mechanism	MI_RBDEMEEV_DAM_MECH_C	Character (50)	The value in this cell must be Criticality Calculator Internal Corrosion.
Damage Comments	MI_RBDEMEEV_DAM_COM_T	Text	None
Selected Corrosion Rate	MI_RBDEMEEV_SEL_CORR_RATE_N	Numeric	A value is required for each row. In the baseline GE Digital APM system, this cell may only contain one of the following System Code IDs: 1 2 3 For this field: 1 corresponds to Estimated Rate. 2 corresponds to Short Term Avg. 3 corresponds to Long Term Avg. 3 corresponds to Controlling Corrosion Rate. The list in this field is populated by the RBI_INT_COR_TYP System Code Table. If the system code table has been customized, the valid values could be different. To verify which options are acceptable in your GE Digital APM system, via Configuration Manager, refer to the appropriate table.
Long Term Avg. Corr. Rate	MI_CRINCDME_LONG_TRM_AV_C_RT_N	Numeric	If the Selected Corrosion Rate cell is Long Term Avg., a value is required in this cell.
Short Term Avg. Corr. Rate	MI_CRINCDME_SHRT_TRM_A_C_RT_N	Numeric	If the Selected Corrosion Rate cell is Short Term Avg., a value is required in this cell.
Thinning Type	MI_RBDEMEEV_THIN_TYPE_C	Character (50)	A value is required. In the baseline GE Digital APM system, this cell may only contain one of the following values: General Localized Pitting
Inspection Date	MI_CRDEMEEV_INSP_DATE_D	Date	None
Number of Inspections	MI_CRDEMEEV_NUM_INSP_N	Numeric	A value is required. In the baseline GE Digital APM system, this cell may only contain a numeric value between 1 and 20.
Inspection Confidence	MI_CRDEMEEV_INSP_CONF_C	Character (50)	A value is required. In the baseline GE Digital APM system, this cell may only contain one of the following values: Low Medium High Very High
Predictable	MI_CRINCDME_PRED_C	Character (50)	While not required, it is recommended you enter a value in this cell. In the baseline GE Digital APM system, this cell may only contain one of the following System Code IDs: Y N The list in this field is populated by the MI_YES_NO System Code Table. If the system code table has been customized, the valid values could be different. To verify which options are acceptable in your GE Digital APM system, via Configuration Manager, refer to the appropriate table.

On the DME_Other worksheet, you will specify Degradation Mechanisms related that you want to create and link to RBI Criticality Analysis records. For each Degradation Mechanism, a Degradation Mechanism Evaluation is created and linked to the specified analysis. Additionally, a corresponding Potential Degradation Mechanism is created and linked to the specified component.

Field Caption	Field ID	Data Type (Length)	Comments
Equipment ID	MI_EQUIP000_EQUIP_ID_C	Character (255)	Values in this column must match values entered on the Assets worksheet. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
CMMS System	MI_EQUIP000_SAP_SYSTEM_C	Character (255)	Values in this column must match values entered on the Assets worksheet, if they exist. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
Equipment Technical Number	MI_EQUIP000_EQUIP_TECH_NBR_C	Character (255)	Values in this column must match values entered on the Assets worksheet, if they exist. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
Component	MI_RBICOMPO_COMPO_C	Character (250)	A value is required.
Component Type	MI_RBICOMPO_COMPO_TYPE_C	Character (60)	A value is required. This cell may only contain a value that exists in the list in the Component Type field for Criticality RBI Component records.
Analysis Unique ID	MI_ANALYSIS_ID	Character (255)	The value in this cell must correspond to a value entered in the Analysis Unique ID column on the RBI_Criticality_Analysis worksheet.
Damage Mechanism	MI_RBDEMEEV_DAM_MECH_C	Character (50)	The value in this cell must be a Degradation Mechanism that corresponds to a Criticality Other Damage Mech. Eval. record. The value in this cell is used to create the Degradation Mechanism for the Degradation Mechanism Evaluation that will be linked to the analysis, as well as the corresponding Potential Degradation Mechanism that will be related to the component. In the baseline GE Digital APM system, this cell may only contain one of the following values: 885 Embrittlement Brittle Fracture Carburization Creep Erosion Ext Chloride SCC Graphitization Hot Hydrogen Attack Hydrogen Embrittlement Hydrogen Induced Cracking Liquid Metal Embrittlement Mechanical Fatigue Microbiologically Induced Corrosion Phase Change Embrittlement Refractory Failure Temper Embrittlement Thermal Fatigue Wet H2S Damage
Probability Category	MI_RBDEMEEV_LIKE_CAT_C	Character (50)	While not required, it is recommended you enter a value in this cell. In the baseline GE Digital APM system, this cell may only contain one of the following values: 1 2 3 4 5
Damage Comments	MI_RBDEMEEV_DAM_COM_T	Text	None

On the DME_Other worksheet, you will specify custom Degradation Mechanisms that you want to create and link to RBI Criticality Analysis records. For each Degradation Mechanism, a Degradation Mechanism Evaluation is created and linked to the specified analysis. Additionally, a corresponding Potential Degradation Mechanism is created and linked to the specified component.

Note: Each row represents a unique custom Degradation Mechanism. Only one of each type of Degradation Mechanism can be linked to an analysis. For example, the same analysis could have a Carbonate Cracking Degradation Mechanism and a Caustic Cracking Degradation Mechanism, but not two Carbonate Cracking Degradation Mechanisms.

Field Caption

Field ID

Data Type (Length)

Comments

Equipment ID

MI_EQUIP000_EQUIP_ID_C

Character (255)

Values in this column must match values entered on the Assets worksheet. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).

CMMS System

MI_EQUIP000_SAP_SYSTEM_C

Character (255)

Values in this column must match values entered on the Assets worksheet, if they exist. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).

Equipment Technical Number

MI_EQUIP000_EQUIP_TECH_NBR_C

Character (255)

Values in this column must match values entered on the Assets worksheet, if they exist. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).

Component

MI_RBICOMPO_COMPO_C

Character (250)

A value is required.

Component Type

MI_RBICOMPO_COMPO_TYPE_C

Character (60)

A value is required.

This cell may only contain a value that exists in the list in the Component Type field for Criticality RBI Component records.

Analysis Unique ID

MI_ANALYSIS_ID

Character (255)

The value in this cell must correspond to a value entered in the Analysis Unique ID column on the RBI_Criticality_Analysis worksheet.

Damage Mechanism

MI_RBDEMEEV_DAM_MECH_C

Character (50)

The value in this cell must be a Degradation Mechanism that corresponds to a Criticality Other Damage Mech. Eval. record.

The value in this cell is used to create the Degradation Mechanism for the Degradation Mechanism Evaluation that will be linked to the analysis, as well as the corresponding Potential Degradation Mechanism that will be related to the component.

In the baseline GE Digital APM system, this cell may only contain one of the following values:

Amine Cracking (ASCC)
Carbonate Cracking
Caustic Cracking
Chloride Stress Corrosion Cracking (CI SCC)
Hydrogen Stress Cracking (HSC)- Hydrofluoric Acid
Polythionic Acid SCC (PTA)
Sulfide Stress Cracking (SSC)
Wet H2S (Blistering, SOHIC, HIC, SSC)
Criticality Calculator External Corrosion
Criticality Calculator Internal Corrosion
885 Embrittlement
Brittle Fracture
Carburization
Creep
Erosion
Ext Chloride SCC
Graphitization
Hot Hydrogen Attack
Hydrogen Embrittlement
Hydrogen Induced Cracking
Liquid Metal Embrittlement
Mechanical Fatigue
Microbiologically Induced Corrosion
Phase Change Embrittlement
Refractory Failure
Temper Embrittlement
Thermal Fatigue
Wet H2S Damage

DME Family

MI_DME_FAMILY

Character (50)

A value is required.

Probability Category

MI_RBDEMEEV_LIKE_CAT_C

Character (50)

While not required, it is recommended you enter a value in this cell.

In the baseline GE Digital APM system, this cell may only contain one of the following values:

Degradation Mechanism	Ranking
Brittle Fracture	1
Brittle Fracture	2
Brittle Fracture	3
Brittle Fracture	4
Brittle Fracture	5
Carburization	1
Carburization	2
Carburization	3
Carburization	4
Carburization	5
Creep	1
Creep	2
Creep	3
Creep	4
Creep	5
Erosion	1
Erosion	2
Erosion	3
Erosion	4
Erosion	5
Ext Chloride SCC	1
Ext Chloride SCC	2
Ext Chloride SCC	3
Ext Chloride SCC	4
Ext Chloride SCC	5
Graphitization	1
Graphitization	2
Graphitization	3
Graphitization	4
Graphitization	5
Hot Hydrogen Attack	1
Hot Hydrogen Attack	2
Hot Hydrogen Attack	3
Hot Hydrogen Attack	4
Hot Hydrogen Attack	5
Hydrogen Embrittlement	1
Hydrogen Embrittlement	2
Hydrogen Embrittlement	3
Hydrogen Embrittlement	4
Hydrogen Embrittlement	5
Hydrogen Induced Cracking	1
Hydrogen Induced Cracking	2
Hydrogen Induced Cracking	3
Hydrogen Induced Cracking	4
Hydrogen Induced Cracking	5
Liquid Metal Embrittlement	1
Liquid Metal Embrittlement	2
Liquid Metal Embrittlement	3
Liquid Metal Embrittlement	4
Liquid Metal Embrittlement	5
Mechanical Fatigue	1
Mechanical Fatigue	2
Mechanical Fatigue	3
Mechanical Fatigue	4
Mechanical Fatigue	5
Phase Change Embrittlement	1
Phase Change Embrittlement	2
Phase Change Embrittlement	3
Phase Change Embrittlement	4
Phase Change Embrittlement	5
Temper Embrittlement	1
Temper Embrittlement	2
Temper Embrittlement	3
Temper Embrittlement	4
Temper Embrittlement	5
Thermal Fatigue	1
Thermal Fatigue	2
Thermal Fatigue	3
Thermal Fatigue	4
Thermal Fatigue	5
Wet H2S Damage	1
Wet H2S Damage	2
Wet H2S Damage	3
Wet H2S Damage	4
Wet H2S Damage	5

Damage Comments

MI_RBDEMEEV_DAM_COM_T

Text

None

On the Degradation_Mechanism worksheet, you will specify related Degradation Mechanisms that you want to create and link to RBI Criticality Analysis records.

Field Caption	Field ID	Data Type (Length)	Comments
Equipment ID	MI_EQUIP000_EQUIP_ID_C	Character (255)	Values in this column must match values entered on the Assets worksheet. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
CMMS System	MI_EQUIP000_SAP_SYSTEM_C	Character (255)	Values in this column must match values entered on the Assets worksheet, if they exist. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
Equipment Technical Number	MI_EQUIP000_EQUIP_TECH_NBR_C	Character (255)	Values in this column must match values entered on the Assets worksheet, if they exist. Multiple components can be linked to the same asset (i.e., rows may have the same value in this column).
Component	MI_RBICOMPO_COMPO_C	Character (250)	A value is required.
Component Type	MI_RBICOMPO_COMPO_TYPE_C	Character (60)	A value is required. This cell may only contain a value that exists in the list in the Component Type field for Criticality RBI Component records.
Analysis Unique ID	MI_ANALYSIS_ID	N/A	The value in this cell must correspond to a value entered in the Analysis Unique ID column on the RBI_Criticality_Analysis worksheet.
Damage Mechanism	MI_RBDEMEEV_DAM_MECH_C	Character (50)	The value in this cell must be a Degradation Mechanism that corresponds to a Criticality Other Damage Mech. Eval. record. The value in this cell is used to create the Degradation Mechanism for the Degradation Mechanism Evaluation that will be linked to the analysis, as well as the corresponding Potential Degradation Mechanism that will be related to the component. In the baseline GE Digital APM system, this cell may only contain one of the following values: Amine Cracking (ASCC) Carbonate Cracking Caustic Cracking Chloride Stress Corrosion Cracking (CI SCC) Hydrogen Stress Cracking (HSC)- Hydrofluoric Acid Polythionic Acid SCC (PTA) Sulfide Stress Cracking (SSC) Wet H2S (Blistering, SOHIC, HIC, SSC) Criticality Calculator External Corrosion Criticality Calculator Internal Corrosion 885 Embrittlement Brittle Fracture Carburization Creep Erosion Ext Chloride SCC Graphitization Hot Hydrogen Attack Hydrogen Embrittlement Hydrogen Induced Cracking Liquid Metal Embrittlement Mechanical Fatigue Microbiologically Induced Corrosion Phase Change Embrittlement Refractory Failure Temper Embrittlement Thermal Fatigue Wet H2S Damage
Deg Mech Comments	MI_DEGR_MECH_DEG_MECH_COMM_TX	Text	None