Gas turbine modernization and upgrades

Mark VIe gas turbine control system upgrade

Upgrade to the Mark VIe control system and integrate the latest software specially developed for GE Aero LM product lines.

Compatible turbines

LM2500, LM6000, TM2500, LMS100

GT13E2 startup reliability package

Improve your startup reliability by correcting ignition mass flow, improving your VIGV schedule and achieving a premix fuel ratio.

Compatible turbines

GT13E

GT13E2 fast start upgrade

Reduce your start-up time and auxiliary power consumption while increasing your gas turbine start-up reliability with a GT13E2 fast start upgrade from GE.

Compatible turbines

GT13E

GT13E2 structural parts maintainability upgrade

The GT13E2 gas turbine needs to periodically have its Radial Rotor Positioning (RRP) measured and potentially adjusted.

Compatible turbines

GT13E

GT13E2 TAT probes improvement upgrade

When it comes to controlling and protecting your GT13E2 gas turbine, proper measurement of the exhaust gas temperature (TAT) is crucial.

Compatible turbines

GT13E

GT13E2 gas turbine insulation protection sheets

Insulation material in the GT13E2 is subject to damage and should be replaced to prevent heat loss.

Compatible turbines

GT13E

Steam turbine heat conservation

Starting a steam turbine hot will keep the unit from entering a cold/warm condition after an ST shutdown and has several benefits

Compatible turbines

GT13E

Exhaust casing spring support upgrade

An exhaust casing spring support upgrade from GE Vernova can reduce blade rubbing caused by exhaust gas housing (EGH) sagging, resulting in improved EGH stability and gas turbine efficiency.

Compatible turbines

GT13E

GT13E2 cross-flange rework for leakage elimination

A cross-flange rework for leakage elimination can address a hot air leakage in the cross-flange area of your GT13E2 gas turbine.

Compatible turbines

GT13E

GT13E2 dynamic response improvement upgrade

A dynamic response improvement (DRI) upgrade can improve your gas turbine’s reaction to grid disturbance and instability and help achieve greater flexibility and reliability.

Compatible turbines

GT13E

Exhaust plenum and frame upgrade

GE Vernova's Corrosion and Heat Resistant Original Equipment Manufacturer (CHROEM™) improved exhaust systems applies the latest GE Vernova technology to extend life and provide economic benefits through increased reliability, maintainability, and service life for operators.

Compatible turbines

6B

6B hot gas path interval extension

With a hot gas path combustion interval extension upgrade from GE, you can increase your gas turbine’s availability and reduce maintenance costs.

Compatible turbines

6B

Combustion interval extension

With a combustion interval extension upgrade from GE, you can increase your gas turbine’s availability and reduce maintenance costs.

Compatible turbines

6B

6B gas turbine reliability package

With our enhanced reliability package, your GE Vernova 6B gas turbine can be more than the workhorse of your plant. It can also act as a guard against failed trips, forced outages, and the loss of revenue that follows.

Compatible turbines

6B

9E enhanced turndown powered by axial fuel staging

The 9E enhanced turndown package is powered by axial fuel staging (AFS) and corrected parameter control (CPC). Each widens DLN1/DLN1+ systems load operation ranges with compliant emissions.

Compatible turbines

9E

9E Fast Start with static starter

With the rise of renewables and new competitive industry, operators are searching for ways to achieve faster, lower-cost, more precise starts. Learn about the benefits of GE Vernova's Fast Start with static starter upgrade for the 9E gas turbine.

Compatible turbines

9E

9E.03 gas turbine AGP XPAND upgrade

Increase output, efficiency, and availability while reducing fuel consumption. GE Vernova's advanced gas path (AGP) upgrade for 9E gas turbines increases performance and asset life for your key turbines.

Compatible turbines

9E

GE’s latest overspeed test upgrade

Avoid unsafe, expensive failures, and reduce the need for periodic tests of protection systems with GE Vernova's upgraded test that runs quickly and automatically, at low risk, and without asset wear and tear.

Compatible turbines

6B, 6F, 7E, 7F, 9E, 9F

7Extend upgrade package

Extend life and restore performance for your 7B, 7E, and 7EA gas turbines with GE Vernova's 7Extend Upgrade Package. Contact GE Vernova today!

Compatible turbines

7E

Steam turbine upgrades

GE’s integrated approach to steam turbine upgrades extends unit life, boosts operational efficiency, and enhances the flexibility of your combined-cycle power plant.

Compatible turbines

Steam turbines

Generator upgrades

Our upgrades for power plant generators can improve reliability, efficiency and output.

Compatible turbines

Generators

HRSG upgrades for pressure parts and non-pressure parts

GE offers upgrades for heat recovery steam generators to improve reliability & flexibility, including HRSG harp replacements and HRSG desuperheater upgrades.

Compatible turbines

HRSG

9E gas exhaust system upgrade

GE Vernova's gas turbine exhaust system upgrade improves system reliability and reduces repair costs for your 9E gas turbine. Contact GE Vernova today!

Compatible turbines

9E

Dry low NOx upgrade for E-class turbines

Our dry low NOx emissions (DLN) combustion system upgrade improves emissions compliance with new flexibility. Increase the value of your E-class turbines today.

Compatible turbines

7E, 9E

Direct drive ventilation fan upgrade

GE Vernova's direct drive ventilation fans drop-in upgrades are designed to replace your current fans with limited disruption and can eliminate over-tensioning, overloaded bearings, and fan failure.

Compatible turbines

LM6000, LM2500

Differential pressure transmitter

GE Vernova's new differential pressure transmitters provide an upgrade for your existing anemometers to improve your gas turbine fleet’s reliability.

Compatible turbines

6B, 9E, 6F

Development in process

Clutchless synchronous condenser upgrade

GE Vernova's clutchless synchronous condenser upgrade increases reactive-power capability for LM2500 gas turbines by allowing the generator to act as a synchronous condenser.

Compatible turbines

LM2500

Bently nevada 3500 vibration monitoring system

GE Vernova's Bently Nevada 3500 Vibration System for LM6000 and LM/TM2500 gas turbines reduces non-critical trips, including noise-driven and transient vibration shutdowns.

Compatible turbines

LM2500, LM6000, TM2500

B- and E-class combustion fuel flexibility

GE Vernova's B-/E-class combustion systems can help you to accommodate a full range of fuel alternatives, as well as switch from one fuel to another while running under load or during shutdown.

Compatible turbines

6B, 7E, 9E, GT8, GT9, GT11N2, GT13E

Automatic voltage regulator upgrade

GE Vernova's EX2100e upgrade builds on the EX2100 experience of over 1,200 units in gas, steam, and hydro applications, providing enhanced reliability, availability, and performance with advanced algorithms.

Compatible turbines

LM6000, LM2500, LMS100, TM2500

Asymmetric diffuser—LM/TM2500

In the face of footprint restrictions, GE Vernova's asymmetric diffuser helps mitigate pressure losses downstream of your power turbine.

Compatible turbines

LM2500, TM2500

Anti-icing upgrade

GE Vernova's anti-icing system prevents ice-related internal damage to engine blades through automated controls that run when ice is detected.

Compatible turbines

LM6000, LM2500, LMS100

ActivePoint HMI

GE Vernova's latest ActivePoint HMI can help protect your plant from cyberattacks, improve operator experience, and increase both efficiency and plant performance.

Compatible turbines

GT13D, GT11D, 6B, 9E, GT11N2, GT11N, 7E, 9F, 6F, 7F, GT26, GT9, GT24, GT8, GT13E

9F gas turbine AGP upgrade

GE Vernova's Advanced Gas Path upgrade increases efficiency to deliver industry leading performance & operational flexibility. Learn more about the 9F AGP upgrade today.

Compatible turbines

9F

9F.05 gas turbine CUSP (compressor unit-specific protection) upgrade

GE Vernova's Compressor Unit-Specific Protection (CUSP) can help with 9F.05 gas turbine issues from increased inlet bleed heat (IBH). Learn about the upgrade today.

Compatible turbines

9F

9EMax four-stage turbine

GE Vernova's 9EMax four-stage gas turbine can be used to repower your existing 9E to reduce annual fuel costs and unlock significant revenue within the same footprint.

Compatible turbines

9E

9E gas turbine enhanced reliability upgrade

The 9E enhanced reliability upgrade acts as a guard against failed trips, outages, & revenue loss. Learn how this upgrade can be a workhorse of your plant.

Compatible turbines

9E

9E advanced compressor upgrade

GE Vernova's material & diagnostic enhancements act as a single upgrade for your 9E’s inlet system & compressor. Learn more about how it guards against risky failures.

Compatible turbines

9E

Fast start for KA26

GE Vernova's Flex Start for KA26 enables you to connect and generate power to the grid faster and more economically by optimizing GT synchronization, combined-cycle startup, and GT/ST loading.

Compatible turbines

GT26

Fire protection panel upgrade

GE Vernova's fire protection upgrade is NFPA-compliant and mounted in the turbine control panel to closely monitor gas and flame sensors.

Compatible turbines

LM6000, LMS100, LM2500, TM2500

Evaporative cooler

GE Vernova's evaporative cooling system upgrade increases power output and efficiency for sites with high ambient temperatures and low relative humidity.

Compatible turbines

LM6000, LM2500, LMS100

Fast start for GT base fleet turbines

GE Vernova's Fast Start reduces turbine startup time for GT base fleet gas turbines. Learn more about how you could reach full load within just 10-15 minutes.

Compatible turbines

GT11N, GT11N2, GT13D, GT8

GT24 MXL2 upgrade

GE Vernova can upgrade your GT24 gas turbine to operate in two modes. Learn how the GT24 MXL2 upgrade can increase flexibility and extend performance today.

Compatible turbines

GT24

GT24/GT26 low part load gas turbine upgrade

GE Vernova's GT24/GT26 sequential combustion engine upgrade can enable your combined-cycle plant to achieve best-in-class turndown.

Compatible turbines

GT26, GT24

GT8C XL gas turbine upgrade

GE Vernova's blading upgrade for GT8C XL gas turbines provides performance neutrality and longer spans between C-inspection intervals from 24 to 32 kEOH, reducing downtime and maintenance costs.

Compatible turbines

GT8

GT8, GT11N, GT13D EV-alpha burner

GE Vernova's EV-alpha burner for GT8, GT11N, and GT13D gas turbines with fuel gas represents the result of our continuing research and investment for the best in burner technology.

Compatible turbines

GT13D, GT11N, GT8

KA26 low load operation

GE Vernova's KA26 Low Load Operation upgrade enables you to park your GT26 fired combined-cycle plant at extremely low load while remaining compliant with emission requirements.

Compatible turbines

GT26

GT26 high efficiency gas turbine upgrade

The GT26 HE upgrade blends F- and H-Class technologies, delivering unmatched gas turbine reliability and availability with higher performance.

Compatible turbines

GT26

GT9D1X performance improvement package

GE Vernova's modular GT9D1x Performance Improvement Package, introduced to address customer-specific requirements, provides increased performance and reduced maintenance costs.

Compatible turbines

GT9

Inlet air chilling system

GE Vernova's inlet chilling system cools compressor intake air, increasing the air density and output of your critical engines.

Compatible turbines

LM6000, LM2500, LMS100

Cross-fleet repowering with aero

Regardless of your original equipment manufacturer, GE has the latest aeroderivative gas turbine repowering technology to make your units economically viable again.

Compatible turbines

NON-GE-AERO-GASTURBINES, NON-GE-HEAVY-DUTY-GASTURBINES

GT13E1 MC2 gas turbine upgrade

GE Vernova's GT13E1 MC2 upgrade significantly improves performance and increases life between inspections by 50% by combining turbine, compressor, and combustor parts into one package.

Compatible turbines

GT13E

GT13E2 AEV burner

GE Vernova's AEV Burner employs a new continuous fuel variation concept as the basis for more flexible and reliable operation as demand increases.

Compatible turbines

GT13E

GT13E2 MXL2 upgrade

GE Vernova's GT13E2 MXL2 upgrade, designed to be compatible with all installed GT13E2 units, combines GE Vernova's latest technology developments with more than 10 million operating hours of GT13E2 fleet experience.

Compatible turbines

GT11DXC compressor upgrade

GE Vernova's GT11DXC upgrade uses advanced aerodynamic blading to provide high reliability, availability, and maintainability of your compressor without increasing stress on the components.

Compatible turbines

GT11D

GT11N2 M upgrade

GE Vernova's GT11N2 M upgrade combines new technological developments with existing proven gas turbine designs to facilitate competitiveness of your plant.

Compatible turbines

GT11N2

GT11NMC XL/XP turbine and compressor upgrade

GE Vernova's GT11NMC compressor upgrade can substantially increase power output and reduce CO2 emissions for your plant.

Compatible turbines

GT11N

GT11NM XL/XP turbine upgrade

Let GE Vernova increase the performance of your GT11NM XL and XP turbines—with a flexible upgrade that boosts efficiency.

Compatible turbines

GT11N

GT13DM and GT13DC+ turbine upgrade

GE Vernova's GT13DM and GT13DC+ turbine upgrades provide increased availability and reliability.

Compatible turbines

GT13D

Gen 3 ESM (exhaust spread monitor)

GE Vernova's Gen 3 ESM (Exhaust Spread Monitor) improves on our ESM2100 with a Modified Exhaust Spread Algorithm (MESA). This latest generation improves running reliability, resulting in longer response times to tackle thermocouple faults, along with increased uptime and fewer trips due to more robust handling of failures.

Compatible turbines

7F

Gas turbine exhaust thermocouple

GE Vernova's exhaust thermocouples upgrade provides more accurate exhaust gas temperature sensor readings, longer asset life, and reliable operations. Learn more.

Compatible turbines

7E, 9E, 6F, 7F, 9F, 6B

New

Gas turbine tuning

Generate power with less emissions and fuel. Make your gas turbine combustion controls smarter using AI/ML with Autonomous Tuning software.

Compatible turbines

LM6000, LM2500

GT11DM turbine upgrade

GE Vernova's GT11DM turbine upgrade increases power output and efficiency, and reduces fuel costs and CO2 emissions.

Compatible turbines

GT11D

Non-optical flame detector

GE Vernova's non-optical flame detector keeps a close watch on your combustor. Get rid of outdated sensors, and avoid risky flame failures that lead to unplanned outages.

Compatible turbines

7F

Performance improvement package

GE Vernova's performance improvement package (PIP) enhances performance and extends the hot gas path component life of your B-/E-class gas turbine units.

Compatible turbines

6B, 7E

Featured

Reliability packages save time and money

GE Vernova's valve & instrumentation reliability solutions are developed to keep your F-class gas turbines running. Improve reliability to preserve revenue today.

Compatible turbines

9F, 7F

Primary frequency control upgrade

GE Vernova's algorithm upgrade to your primary frequency control (PFC) is customized for specific grid requirements, enabling continuous plant equipment operation between 47 and 52 Hz.

Compatible turbines

LM6000, LMS100, LM2500

Remote VSV monitoring

GE Vernova's remote VSV monitoring upgrade allows remote monitoring of the variable stator vanes without having to enter the package and take manual engine readings.

Compatible turbines

LM2500, TM2500

Robust exhaust frame upgrade for 7F & 9F gas turbines

Robust exhaust frames provide operational flexibility for 7F & 9F turbines. Avoid thermal stress during turndown & peaking with this exhaust liner upgrade.

Compatible turbines

7F, 9F

Liquid to dual fuel LM2500

GE Vernova's liquid to dual-fuel upgrade enables your LM2500 turbine to be run on either gas or liquid fuel, with or without water injection for NOx control.

Compatible turbines

LM2500

Liquid fuel reliability systems upgrade for 7F gas turbines

GE Vernova's liquid fuel system reliability upgrade yields greater efficiency and safety for 7F gas turbines. Boost your liquid fuel system reliability today.

Compatible turbines

7F

Liquid to dual fuel—LM6000

GE Vernova's liquid to dual-fuel upgrade enables your LM6000 turbine to be run on either gas or liquid fuel, with or without water injection for NOx control.

Compatible turbines

LM6000

LM6000 flange to flange replacement

GE Vernova's flange-to-flange upgrade for LM6000 gas turbines, a full replacement of your aeroderivative gas turbine engine, reduces operating expenses and emissions, and can reset asset life to zero.

Compatible turbines

LM6000

LM6000 fast start upgrade

GE Vernova's Fast Start upgrade enables your LM6000 to reach full load in 5, 8, or 10 minutes, reducing start-up time and helping to meet peak turbine demand.

Compatible turbines

LM6000

LM2500 and LM6000 fuel condition monitoring

GE Vernova's fuel variability control provides increased system response for your existing LM2500 and LM6000 gas turbines to help avoid issues caused by changes in fuel composition.

Compatible turbines

LM6000, LM2500

LM/TM2500 SAC to DLE

GE Vernova's LM/TM2500 SAC to DLE upgrade converts your LM/TM2500 SAC gas turbine to DLE technology, eliminates water consumption for NOx control, and improves thermal efficiency.

Compatible turbines

LM2500, TM2500

LM/TM2500 base to plus/plus G4

GE Vernova's LM2500 and TM2500 models can be updated to the current LM2500+ or LM2500+G4 configuration for enhanced output and improved thermal efficiency.

Compatible turbines

LM2500, TM2500

LM6000 hybrid EGT

GE Vernova's LM6000 Hybrid EGT upgrade integrates a battery energy storage system with the LM6000 gas turbine, enabling contingency (spinning) reserve without fuel-burn between demand events.

Compatible turbines

LM6000

LM6000PC SAC extended fife combustor upgrade

GE Vernova's LM6000PC SAC extended life combustor upgrade alleviates issues with anti-rotation tabs and coating loss, preserving combustor performance and extending downstream component life.

Compatible turbines

LM6000

LM6000PC uprate gas turbine upgrade

GE Vernova's LM6000PC upgrade increases power, water savings, and lifespan, without requiring gearbox changes, within the same package and engine footprint as the LM6000PC gas turbine.

Compatible turbines

LM6000

LM6000 peak performance upgrade

GE Vernova's LM6000 Peak Performance upgrade enables your LM6000PC to achieve up to 5% more output over current nominal power through peak firing; increased monitoring algorithms track life impact.

Compatible turbines

LM6000

LMS100PA+ upgrade

GE Vernova's LMS100PA+ upgrade provides more than 100 MW of power without affecting heat rate, emissions, or reliability, despite increasing energy consumption.

Compatible turbines

LMS100

S7 fuel control upgrade

GE Vernova's S7 fuel control upgrade enables updates created to improve the reliability, availability, and performance of your LM6000 gas turbine.

Compatible turbines

LM6000

SPRINT LM6000

GE Vernova's SPray INTercooling (SPRINT) increases the output of the LM6000 gas turbine by cooling combustion air, providing a greater mass flow through the low-pressure and high-pressure compressors.

Compatible turbines

LM6000

Super-polished high-pressure compressor blades

GE Vernova's super-polished compressor blades reduce compressor blade and vane fouling rates and increase uptime, helping to maintain compressor performance over time.

Compatible turbines

LM6000

T-fire solutions for gas turbines

GE Vernova's T-Fire solutions uprate the gas turbine firing temperature of 6B, 7E and 9E units. Upgrade plant performance with GE Vernova's T-Fire solutions.

Compatible turbines

6B, 7E, 9E

Thrust balance valve removal

GE Vernova's thrust balance valve (TBV) upgrade adds an on-engine tube and an in-line plate orifice, helping to reduce mechanical failures associated with the TBV.

Compatible turbines

LM6000

Variable inlet guide vanes (VIGV) with EFS

Upgrade your LM6000 gas turbine with variable inlet guide vanes with EFS from GE Vernova. Take the next step in enhancing your gas turbine performance.

Compatible turbines

LM6000

7F high output stage 0 compressor

GE Vernova's background in developing and testing enhanced compressor technology has led to our latest upgrade: the 7F flared high output stage 0 compressor.

Compatible turbines

7F

7E capacity performance package

Learn how the 7E turbine capacity performance package offers wider load operation and compliant emissions via axial fuel staging & corrected parameter control.

Compatible turbines

7E

7EA high output robust compressor upgrade

GE Vernova's high output robust compressor (HORC) upgrade for 7EA gas turbines boosts output and exhaust energy while also preventing clashing events. Learn more here.

Compatible turbines

7E

Gas turbine alternative fuel retrofit upgrade

The alternative fuel retrofit upgrade easily allows turbines to burn fuels such as hydrogen and coke oven gas. Learn more about GE Vernova's alternative fuel retrofit.

Compatible turbines

LM2500, TM2500, LMS100

Gas turbine control system upgrade—MicroNet Plus

The MicroNet Plus gas turbine control system interfaces with field devices and on-engine hardware for core fuel control, package sequencing, & protection.

Compatible turbines

LM6000, LM2500

4-hour gas turbine lockout prevention

GE Vernova's lockout prevention upgrade for LM/TM2500 and LM6000 gas turbines prevent the 4-hour lockout period after a hot shutdown, reducing risk to rotors, increasing machine safety, and preserving uptime.

Compatible turbines

LM2500, LM6000, TM2500

Water injection for NOx reduction

GE Vernova's water injection system upgrade for non-dry low emissions turbines (without a NOx abatement system) can reduce NOx emissions to 25 ppm (gas fuel) or 42 ppm (liquid fuel).

Compatible turbines

LM6000, LMS100, LM2500

Xtend hot section upgrade—DLE

GE Vernova's Xtend* upgrade for LM2500 and TM2500 Base DLE 1.0 engines increases the hot section life to 50,000 hours, reduces lifecycle costs, and increases site availability.

Compatible turbines

LM2500, TM2500

Xtend hot section upgrade—SAC

GE Vernova's Xtend* upgrade for LM2500 and TM2500 Base SAC 1.0 engines increases the hot section life to 50,000 hours, reduces lifecycle costs, and increases site availability.

Compatible turbines

LM2500, TM2500

Advanced extendor upgrade

GE Vernova's advanced extendor upgrade for combustor parts leads to proven durability and longer life. Reduce component wear & combustion repair costs today.

Compatible turbines

6B, 7E, 9E

GT13E2 MXL2 upflow compressor gas turbine upgrade

GE Vernova can upgrade GT13E2 MXL2 compressors nearing their end-of-service. See how GE Vernova's Upflow Compressor upgrade grants higher gas turbine output and efficiency.

Compatible turbines

GT13E

7F Axial Fuel Staging (AFS)

Attain lower turndown, emissions and reduce maintenance costs with GE Vernova's 7F Axial Fuel Staging (AFS) gas turbine upgrade for further turndown capability.

Compatible turbines

7F

7E gas turbine enhanced capacity upgrade

Get the most out of your existing 7E gas turbine. Increase your capabilities and energy revenue with GE Vernova's 7E gas turbine enhanced capacity upgrade.

Compatible turbines

7E

6F.03 gas turbine AGP upgrade

Increase output and time between inspections, while also reducing annual baseload costs with the advanced gas path (AGP) upgrade for 6F.03 turbines.

Compatible turbines

6F

9E gas turbine AGP upgrade

GE Vernova's 9E Advanced Gas Path upgrade delivers industry-leading efficiency and increased output. Start driving operational flexibility with the 9E AGP today.

Compatible turbines

9E

6B gas turbine AGP upgrade

GE Vernova's Advanced Gas Path (AGP) upgrade will increase the availability and output of your 6B turbine. Extend the assets of your 6B turbine today with AGP.

Compatible turbines

6B

GT13E2 EV-alpha burner

GE Vernova's EV-alpha burner uses state-of-the-art combustion technology to help reduce nitrous oxide emissions by approximately 35%.

Compatible turbines

GT13E

Gas to dual fuel—LM6000

GE Vernova's gas to dual-fuel upgrade enables your LM6000 turbine to run on either gas or liquid fuel, with or without water injection for NOx control.

Compatible turbines

LM6000

Gas to dual fuel—LM2500

GE Vernova's gas to dual-fuel upgrade enables your LM2500 turbine to run on either gas or liquid fuel, with or without water injection for NOx control.

Compatible turbines

LM2500

Advanced secondary fuel nozzle upgrade

Learn how the advanced secondary gas turbine fuel nozzle unlocks flexibility & provides value across a wide range of parameters via additive manufacturing.

Compatible turbines

7E, 9E

Gas turbine compressor bleed valve upgrade

Improve the reliability and availability of your 7F or 9F gas turbines' critical cooling and sealing air system with GE Vernova's stainless-steel compressor valves.

Compatible turbines

7F, 9F

Valve tracking logic for trip mitigation

GE Vernova's valve tracking logic for trip mitigation is an application software enhancement developed to improve TMR robustness and mitigate the risk of unit trip.

Compatible turbines

7F

Electric gas control valves and electric inlet guide vane actuator

Replacing your hydraulically actuated gas valves and inlet guide vane actuator with electrically actuated gas valves can help ensure long-term system safety and improve the reliability of your complete gas turbine and accessories

Compatible turbines

7F, 7E, 9F

Rotor-in major inspection for gas turbines

Alleviate safety concerns, reduce costs and save time with GE Vernova's rotor-in major turbine inspections. Learn more with GE.

Compatible turbines

6B, 6F, 7E, 7F, 9E, 9F

Dry Low NOx (DLN 2.6) combustion upgrade

The GE Vernova Dry Low NOx (DLN 2.6) combustion system gas turbine upgrade can provide flexibility and reduced emissions. Enhance your F-class gas turbine today.

Compatible turbines

9F, 6F, 7F

F-class enhanced compressor packages

Improve reliability and durability of your turbine with GE Vernova's compressor package for F-class gas turbines. Enhance your gas turbine performance today.

Compatible turbines

6F, 7F, 9F

7F gas turbine advanced compressor

Learn more about GE Vernova's gas turbine advanced axial compressor upgrade solution. Improve your 7F's output by up to 16% and efficiency up to 3% today.

Compatible turbines

7F

6B repowering upgrade

GE Vernova's 6B repowering upgrade improves performance in both gas turbine and combined-cycle operation while maintaining the unit’s reliability and fuel flexibility.

Compatible turbines

6B

TDI clutch upgrade

GE Vernova's upgrade to your hydraulic starter clutch allows the existing starting system to operate with enhanced reliability and availability.

Compatible turbines

LM2500, TM2500

Sump evacuation system

GE Vernova's sump evacuation system upgrade eliminates oil leaks during low-power operation, engine load rejects, or trips from high power.

Compatible turbines

LM6000

Low loss gas turbine bearing upgrade

GE Vernova’s low loss gas turbine bearing upgrade can help reduce turbine shaft losses from reduced mechanical friction. Contact GE Vernova today.

Compatible turbines

6F, 9F

6B gas turbine enhanced reliability upgrade

Even at 99% reliability, learn how 6B gas turbines reduce trip risk, stabilize steam supply, & improve overall operability with GE Vernova's enhanced reliability upgrade.

Compatible turbines

6B

Gas turbine repowering

GE Vernova's flange-to-flange upgrade is a full replacement of an existing gas turbine engine, giving you innovation within the footprint of your existing asset.

Compatible turbines

7E, 9E, 7F, LMS100, 6B

7F gas turbine AGP upgrade

Our advanced gas path upgrade can increase efficiency & extend reliability. Explore GE Vernova's AGP Flex, Peaker, Standard & Tech upgrades for 7F gas turbines.

Compatible turbines

7F

GT13E2 operation & maintenance upgrade

Improve your fleet's adaptability and mitigate engine aging in changing conditions with GE Vernova's operation & maintenance upgrade for GT13E2 gas turbines.

Compatible turbines

GT13E